Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Steelstrong Valves India Private Limited Team. If you also belong to the team, you can get access from here
3.9

based on 75 Reviews

Filter interviews by

Steelstrong Valves India Private Limited Mechanical Engg. Design Interview Questions and Answers

Updated 18 Jul 2021

Steelstrong Valves India Private Limited Mechanical Engg. Design Interview Experiences

1 interview found

I was interviewed in Jan 2021.

Interview Questionnaire 

1 Question

  • Q1. What is stress
  • Ans. 

    Stress is the force per unit area that a material experiences when subjected to an external load.

    • Stress is a measure of the internal forces within a material.

    • It is calculated as the force per unit area.

    • Stress can cause deformation or failure of a material.

    • There are different types of stress, including tensile, compressive, and shear stress.

    • Examples of stress include the weight of a book on a table, the pressure of wate

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Engineering basics should be strong

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Nov 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is meant by GD and T
  • Q2. What is meant by weldment assembly
Round 2 - Design Test 

(2 Questions)

  • Q1. Parametric modeling
  • Q2. Skeleton modeling
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is GD AND T
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.

    • GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.

    • It helps ensure that parts fit together properly and function as intended.

    • GD&T uses symbols such as concentricity, flatness, perpendicularity, and position to communic...

  • Answered by AI
  • Q2. What is surface finish symbol means
  • Ans. 

    Surface finish symbol indicates the type of surface treatment required on a part for manufacturing purposes.

    • Surface finish symbols are typically found on engineering drawings to specify the type of finish needed on a part.

    • The symbol consists of a horizontal line with various geometric shapes and numbers that indicate the required finish.

    • Examples of surface finish symbols include Ra for roughness average, Rz for maximum...

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. How do you see you in five years
  • Q2. What is your best strength

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for technical and managerial rounds

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Gd & t and basic questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I applied via Walk-in and was interviewed in Jan 2020. There were 6 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Som related questions
  • Q2. Prepare well som and mom
  • Q3. Technical questions
  • Q4. Prepare well technical

Interview Preparation Tips

Interview preparation tips for other job seekers - Before you going to interview, go through company website

I applied via Walk-in and was interviewed before Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Accept all problem....
  • Q2. What is vernier caliper liscaunt...?
  • Ans. 

    Vernier caliper is a precision measuring tool used to accurately measure dimensions of objects.

    • Vernier caliper has a main scale and a sliding vernier scale for more precise measurements.

    • It can measure internal dimensions, external dimensions, and depth of objects.

    • The accuracy of a vernier caliper is typically up to 0.02 mm.

    • Example: Measuring the diameter of a small rod using a vernier caliper.

  • Answered by AI
  • Q3. What is ppm how many use ..??
  • Ans. 

    PPM stands for parts per million, a unit of measurement used to describe the concentration of a substance in a solution.

    • PPM is commonly used in various industries such as manufacturing, environmental monitoring, and water treatment.

    • It is used to express very small concentrations of pollutants or chemicals in air, water, soil, etc.

    • For example, if a water sample contains 5 ppm of lead, it means there are 5 parts of lead

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Venus Industrial Corporation Junior Mechanical Engineer interview:
  • Instruments
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Tell about your self and previous work experience
  • Q2. What suit you for this position

Interview Preparation Tips

Interview preparation tips for other job seekers - Just tell about your previous work
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Nov 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is meant by GD and T
  • Q2. What is meant by weldment assembly
Round 2 - Design Test 

(2 Questions)

  • Q1. Parametric modeling
  • Q2. Skeleton modeling
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is GD AND T
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.

    • GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.

    • It helps ensure that parts fit together properly and function as intended.

    • GD&T uses symbols such as concentricity, flatness, perpendicularity, and position to communic...

  • Answered by AI
  • Q2. What is surface finish symbol means
  • Ans. 

    Surface finish symbol indicates the type of surface treatment required on a part for manufacturing purposes.

    • Surface finish symbols are typically found on engineering drawings to specify the type of finish needed on a part.

    • The symbol consists of a horizontal line with various geometric shapes and numbers that indicate the required finish.

    • Examples of surface finish symbols include Ra for roughness average, Rz for maximum...

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. How do you see you in five years
  • Q2. What is your best strength

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for technical and managerial rounds

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Gd & t and basic questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Tell us how to improve this page.

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.2
 • 233 Interviews
BHEL Interview Questions
4.2
 • 103 Interviews
Forbes Marshall Interview Questions
4.1
 • 39 Interviews
Ksb Pumps Interview Questions
3.9
 • 27 Interviews
C.R.I. Pumps Interview Questions
3.9
 • 26 Interviews
PMT Machines Interview Questions
3.4
 • 19 Interviews
Trelleborg Interview Questions
4.0
 • 17 Interviews
L&T Valves Interview Questions
3.9
 • 9 Interviews
View all
Quality Engineer
13 salaries
unlock blur

₹2.5 L/yr - ₹4.4 L/yr

QA QC Engineer
9 salaries
unlock blur

₹2.5 L/yr - ₹4.5 L/yr

Purchase Engineer
8 salaries
unlock blur

₹2.2 L/yr - ₹4.3 L/yr

Design Engineer
7 salaries
unlock blur

₹1.4 L/yr - ₹7.5 L/yr

Deputy Manager
7 salaries
unlock blur

₹4.1 L/yr - ₹6.8 L/yr

Explore more salaries
Compare Steelstrong Valves India Private Limited with

L&T Valves

3.9
Compare

Forbes Marshall

4.1
Compare

Kirloskar Brothers

3.9
Compare

Audco India

4.0
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview