Upload Button Icon Add office photos

SRF

Compare button icon Compare button icon Compare

Filter interviews by

SRF Utility Engineer Interview Questions, Process, and Tips

Updated 17 Jun 2021

SRF Utility Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1.  what is the boiler Efficiency ?
  • Ans. 

    Boiler efficiency is a measure of how effectively a boiler converts fuel into usable heat energy.

    • Boiler efficiency is expressed as a percentage.

    • It is calculated by dividing the energy output of the boiler by the energy input.

    • Factors affecting boiler efficiency include combustion efficiency, heat transfer efficiency, and excess air levels.

    • Improving boiler efficiency can lead to significant energy savings and reduced emi...

  • Answered by AI
  • Q2. How we increase boiler Efficiency?
  • Ans. 

    Boiler efficiency can be increased by improving combustion efficiency, reducing heat loss, and optimizing boiler operation.

    • Improve combustion efficiency by maintaining proper air-to-fuel ratio and reducing excess air

    • Reduce heat loss by insulating boiler surfaces and minimizing flue gas temperature

    • Optimize boiler operation by regular maintenance, tuning, and monitoring

    • Use economizers and air preheaters to recover waste ...

  • Answered by AI
  • Q3. How we reduce operation coat of plant ?
  • Ans. 

    Reduce operation cost of plant by optimizing processes and equipment.

    • Conduct regular maintenance to prevent breakdowns and reduce repair costs.

    • Implement energy-efficient technologies to reduce utility bills.

    • Train employees to operate equipment efficiently and minimize waste.

    • Monitor and analyze data to identify areas for improvement.

    • Consider outsourcing non-core functions to reduce labor costs.

    • Negotiate better deals wit...

  • Answered by AI
  • Q4. Tell me about your previous achievement?
  • Q5. No breakdowns ideas ?
  • Ans. 

    Regular maintenance, proper training, and use of advanced technology can prevent breakdowns.

    • Regular maintenance of equipment can prevent breakdowns.

    • Proper training of employees can reduce the risk of human error.

    • Use of advanced technology like predictive maintenance can detect potential issues before they become breakdowns.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give simple answer.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Mar 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. General Questions regarding family, future plans etc
Round 3 - Technical 

(1 Question)

  • Q1. TPM, 5S, Process Excellence
Round 4 - One-on-one 

(1 Question)

  • Q1. TPM, Kaizen, JH, KK, 5S, filling operation

Interview Preparation Tips

Interview preparation tips for other job seekers - As I was from beverage industry, they asked me all filling machine related questions
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. P&id preparation and pump sizing
  • Q2. Distillation column and heat exchanger design
  • Ans. 

    Distillation column and heat exchanger design

    • Distillation column design involves determining the number of trays, column diameter, and height

    • Heat exchanger design involves selecting the appropriate type of exchanger, sizing the heat transfer area, and determining the heat transfer coefficient

    • Factors to consider in both designs include the properties of the fluids being processed, flow rates, and pressure drop

    • Computer s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer on which only you know
Do not bluffing
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Yourself and Family background
  • Q2. Equipment types for measurements
  • Ans. 

    Various equipment types are used for measurements in production engineering.

    • Calipers and micrometers for measuring dimensions

    • Pressure gauges for measuring pressure

    • Thermocouples and thermometers for measuring temperature

    • Flow meters for measuring flow rate

    • Spectrometers for measuring chemical composition

    • Sensors for measuring various parameters

    • Data loggers for recording measurements over time

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good communication with sir and self confidence is required

I applied via Walk-in and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Different between single mechanical seal and double mechanical seal
  • Ans. 

    A single mechanical seal consists of one set of sealing surfaces, while a double mechanical seal consists of two sets of sealing surfaces.

    • Single mechanical seals are commonly used in applications with low to moderate pressure and temperature.

    • Double mechanical seals are used in applications with high pressure and temperature to provide an extra layer of protection.

    • Single mechanical seals are simpler and easier to instal...

  • Answered by AI
  • Q2. Type of gear box in used ssr rector
  • Ans. 

    The type of gearbox used in SSR reactors is typically a helical gearbox.

    • SSR reactors commonly use helical gearboxes for their efficient power transmission.

    • Helical gearboxes have high load-carrying capacity and smooth operation.

    • They are suitable for applications requiring high torque and low noise levels.

    • Examples of helical gearboxes used in SSR reactors include inline helical gearboxes and parallel shaft helical gearbo

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Plz consult the resume bet job and best position
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Fgghj rht hjty tyjt g4h 5h5 4th5 tjt eyhry rht

Round 3 - Technical 

(2 Questions)

  • Q1. Tell me something about you. What is design? What is your current Job Profile? How many years of experience do you have?
  • Q2. What is your current job Profile? What is your Current CTC?

Interview Preparation Tips

Interview preparation tips for other job seekers - Go And study hard to place in MNC like this. Best Of Luck

I applied via Naukri.com and was interviewed in Dec 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 
Round 2 - Aptitude Test 
Round 3 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Complete your work and find the achievements
Round 1 - Aptitude Test 
Round 2 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 3 - Aptitude Test 
Round 4 - Technical 

(1 Question)

  • Q1. Asked mass transfer operation
Round 5 - HR 

(1 Question)

  • Q1. Why should we hire you?
Round 6 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Complete your work and find the achievement
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

About production Department Knowledge

Round 3 - HR 

(3 Questions)

  • Q1. About Last company knowledge
  • Ans. Hello mam , I Have 2.5 Years Experience in Production Department from Hitachi Astemo Chennai Pvt Ltd. That is automobile Industry.
  • Answered Anonymously
  • Q2. What making in HITACHI ASTEMO CHENNAI PVT LTD
  • Ans. 

    HITACHI ASTEMO CHENNAI PVT LTD is involved in manufacturing various products and providing engineering solutions.

    • HITACHI ASTEMO CHENNAI PVT LTD manufactures a wide range of products such as industrial machinery, automotive components, and electronic devices.

    • They provide engineering solutions for various industries including manufacturing, automotive, and electronics.

    • The company focuses on innovation, quality, and custo...

  • Answered by AI
  • Q3. Why Resign Giving in Last Company

Interview Preparation Tips

Topics to prepare for Asian Paints Production Engineer interview:
  • OEE
  • 7 Qc tool
  • SPC
  • POKE YOKE
  • LOTO
  • TPM
Interview preparation tips for other job seekers - Hello mam,
My Name is ANKIT ANIL BHAISARE.
I belong to Nagpur (Maharashtra). I have completed my B.E. in Electrical Engineering, From Nagpur Institute of Technology Nagpur and I have 2.5 years in HITACHI ASTEMO CHENNAI PVT LTD.
THANKING YOU
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Maintenance Engineer
  • Q2. What is DG and panel
  • Ans. 

    DG and panel are electrical components used in power generation and distribution systems.

    • DG stands for Diesel Generator and is used as a backup power source in case of power outages or emergencies.

    • Panel refers to an electrical control panel that houses various components such as circuit breakers, switches, and meters used to control and monitor the power distribution system.

    • DG and panel are commonly used in industries,...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Achieve success.

SRF Interview FAQs

What are the top questions asked in SRF Utility Engineer interview?

Some of the top questions asked at the SRF Utility Engineer interview -

  1. what is the boiler Efficienc...read more
  2. How we reduce operation coat of plan...read more
  3. How we increase boiler Efficien...read more

Tell us how to improve this page.

SRF Utility Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Asian Paints Interview Questions
4.0
 • 645 Interviews
ITC Interview Questions
3.9
 • 547 Interviews
Dabur Interview Questions
4.0
 • 271 Interviews
Berger Paints Interview Questions
3.7
 • 259 Interviews
UPL Interview Questions
4.1
 • 175 Interviews
Marico Interview Questions
4.0
 • 87 Interviews
View all
SRF Utility Engineer Salary
based on 21 salaries
₹3.6 L/yr - ₹10.7 L/yr
39% more than the average Utility Engineer Salary in India
View more details

SRF Utility Engineer Reviews and Ratings

based on 4 reviews

4.3/5

Rating in categories

4.5

Skill development

4.5

Work-life balance

3.5

Salary

4.5

Job security

4.2

Company culture

3.5

Promotions

4.1

Work satisfaction

Explore 4 Reviews and Ratings
Junior Engineer
977 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
406 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technician
187 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Officer
183 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
167 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare SRF with

Pidilite Industries

4.3
Compare

BASF

4.4
Compare

UPL

4.1
Compare

Bayer Crop Science Vegetable Seeds

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview