SPIE Oil & Gas Services Electrical Technician Interview Questions and Answers

To check IR of XLPE cable, use a megger to measure insulation resistance.

• Use a megger to measure insulation resistance of XLPE cable

• Ensure the cable is de-energized before testing

• Compare the measured IR value with the manufacturer's specifications

• Repeat the test at different points along the cable for accuracy

Tests for transformers include turns ratio test, insulation resistance test, power factor test, and winding resistance test.

• Turns ratio test measures the turns ratio between primary and secondary windings.

• Insulation resistance test checks the insulation resistance of the transformer windings.

• Power factor test evaluates the power factor of the transformer.

• Winding resistance test measures the resistance of the transforme

Types of excavations include trench excavation, basement excavation, road excavation, and pit excavation.

• Trench excavation involves digging a narrow channel in the ground for laying pipes or cables.

• Basement excavation is the process of digging out the foundation of a building to create a below-ground level.

• Road excavation is the removal of soil and rocks to construct or repair roads.

• Pit excavation involves digging a la...read more

A centrifugal pump is a mechanical device used to transport fluids by converting rotational kinetic energy into hydrodynamic energy.

• Centrifugal pumps are commonly used in various industries, including oil and gas, water treatment, and HVAC systems.

• They work by using an impeller to rotate and create a centrifugal force, which pushes the fluid towards the pump outlet.

• The fluid enters the pump through the suction inlet an...read more

There are several types of valves used in mechanical systems.

• Gate valve: used to control the flow of fluid by lifting or lowering a gate

• Ball valve: uses a ball to control the flow of fluid

• Butterfly valve: uses a disc to control the flow of fluid

• Check valve: allows fluid to flow in one direction only

• Globe valve: controls flow by raising or lowering a plug

• Needle valve: uses a long, tapered needle to control flow

• Diaphragm...read more

A ball valve is a type of valve that uses a ball-shaped disc to control the flow of fluid through a pipe.

• Ball valves are commonly used in industrial applications for their durability and reliability.

• They have a simple design, consisting of a ball with a hole in the middle that can be rotated to control the flow of fluid.

• Ball valves can be either full port or reduced port, depending on the size of the ball and the hole.

• ...read more

A shell and tube heat exchanger is a device used to transfer heat between two fluids.

• Consists of a shell (outer vessel) and tubes (inner vessels)

• One fluid flows through the tubes while the other flows around the tubes in the shell

• Heat is transferred from one fluid to the other through the tube walls

• Commonly used in industries such as power generation, chemical processing, and HVAC

• Example: Cooling water in a power plant

There are several types of heat exchangers, including shell and tube, plate and frame, and finned tube.

• Shell and tube heat exchangers are the most common type and consist of a shell with tubes inside.

• Plate and frame heat exchangers use thin plates to transfer heat between fluids.

• Finned tube heat exchangers have tubes with fins attached to increase surface area for heat transfer.

• Other types include spiral, double pipe, ...read more

PPE stands for Personal Protective Equipment.

• PPE is equipment worn to minimize exposure to hazards that may cause serious workplace injuries or illnesses.

• Examples of PPE include safety glasses, gloves, hard hats, respirators, and safety shoes.

• PPE should be selected based on the specific hazards present in the workplace.

• Employers are responsible for providing PPE to their employees and ensuring that it is properly maint...read more

An axial flow pump is a type of pump that uses an impeller to create fluid flow parallel to the pump shaft.

• Axial flow pumps are commonly used in applications where large volumes of fluid need to be moved at low to medium pressures.

• They are often used in irrigation systems, drainage systems, and cooling systems.

• The impeller of an axial flow pump has blades that resemble a propeller, which helps in generating the axial f...read more

A check valve is a mechanical device that allows fluid to flow in one direction only.

• Check valves are commonly used in plumbing systems to prevent backflow of water.

• They are also used in hydraulic systems to prevent reverse flow of fluid.

• Check valves can be classified into different types such as swing check valves, lift check valves, and ball check valves.

• These valves work by using a disc or a ball that opens and clos...read more

Positive displacement pump is a type of pump that moves fluid by trapping a fixed amount of it and then forcing it into the discharge pipe.

• Positive displacement pumps operate by trapping a specific volume of fluid and then forcing it into the discharge pipe.

• These pumps are capable of generating high pressures and are used in various industries such as oil and gas, chemical, and food processing.

• Examples of positive disp...read more

A globe valve is a type of valve used to regulate or stop the flow of fluid in a pipeline.

• It has a spherical body with an internal baffle that directs the flow of fluid.

• The valve can be opened or closed by rotating the stem.

• It provides a tight seal when closed, preventing leakage.

• Globe valves are commonly used in applications where throttling or regulating flow is required.

• They are often found in water systems, steam s

PPE stands for Personal Protective Equipment. It refers to protective clothing, helmets, goggles, or other equipment designed to protect the wearer's body from injury or infection.

• PPE is used in various industries to protect workers from hazards.

• Examples of PPE include safety glasses, gloves, hard hats, respirators, and earplugs.

• PPE should be selected based on the specific hazards present in the workplace.

• Proper traini...read more

The AIAG manual Daily Work Management is a guide for managing daily work activities in the automotive industry.

• The manual provides guidelines for managing daily work activities such as production planning, scheduling, and quality control.

• It emphasizes the importance of continuous improvement and problem-solving techniques.

• The manual also includes tools and templates for tracking and analyzing data to identify areas for...read more

The melting point of aluminium is 660.32 degrees Celsius.

• The melting point of aluminium is relatively low compared to other metals.

• Aluminium melts at a temperature of 660.32 degrees Celsius.

• At its melting point, aluminium transitions from a solid to a liquid state.

• The melting point of aluminium is important in various industrial processes, such as casting and welding.