SMCC Construction India QA QC Engineer Interview Questions and Answers

To conduct a slump test, fill a metal cone with concrete, compact it, remove the cone, and measure the slump.

• Clean the cone and moisten it with water.

• Fill the cone with concrete in three layers, compacting each layer with a rod.

• Remove the cone and place it next to the slump.

• Measure the difference in height between the top of the cone and the highest point of the slump.

• Repeat the test at least twice and take the average

Minimum cement content for M25 Grade is 300 kg/m³.

• M25 grade concrete has a minimum compressive strength of 25 MPa.

• The water-cement ratio should not exceed 0.50.

• The cement content can vary based on factors such as aggregate size, shape, and grading.

• The cement content should be adjusted based on the results of trial mixes.

I expect a competitive salary based on industry standards and my experience.

• I have researched the industry standards for QA QC Engineer salaries

• I have taken into account my experience and skills

• I am open to negotiation based on the specific job responsibilities and benefits package

• I am looking for a fair and competitive salary that reflects my value to the company

The output voltage of an AAAC Rabbit conductor is typically around 600 volts.

• The output voltage of an AAAC Rabbit conductor is usually around 600 volts.

• The exact output voltage may vary depending on the specific application and conditions.

• It is important to consult the manufacturer's specifications for accurate information.

My execution work plan involves setting clear goals, creating a timeline, assigning tasks, monitoring progress, and adjusting as needed.

• Set clear goals and objectives for the project

• Create a detailed timeline with milestones and deadlines

• Assign tasks to team members based on their strengths and expertise

• Regularly monitor progress and make adjustments as needed

• Communicate effectively with team members and stakeholders

• Ut...read more

Mix design of flexible pavement and Rigid pavement involves different methods and standards.

• Flexible pavement mix design is based on MS-2 and uses marshal curves parameters.

• Rigid pavement mix design is prepared on a trial basis using MORT S-600 and IRC -58-2004.

• Flexible pavement uses bituminous mixes while rigid pavement uses PQC mix design.

• MORT&H s-500 and IRC-37 are used for flexible pavement mix design.

• MORT S-600 an...read more

To conduct a slump test, fill a metal cone with concrete, compact it, remove the cone, and measure the slump.

• Clean the cone and moisten it with water.

• Fill the cone with concrete in three layers, compacting each layer with a rod.

• Remove the cone and place it next to the slump.

• Measure the difference in height between the top of the cone and the highest point of the slump.

• Repeat the test at least twice and take the average

Minimum cement content for M25 Grade is 300 kg/m³.

• M25 grade concrete has a minimum compressive strength of 25 MPa.

• The water-cement ratio should not exceed 0.50.

• The cement content can vary based on factors such as aggregate size, shape, and grading.

• The cement content should be adjusted based on the results of trial mixes.

I expect a competitive salary based on industry standards and my experience.

• I have researched the industry standards for QA QC Engineer salaries

• I have taken into account my experience and skills

• I am open to negotiation based on the specific job responsibilities and benefits package

• I am looking for a fair and competitive salary that reflects my value to the company