Signature Global Group President Interview Questions and Answers

Q1. What is your job responsibilities
Add your answer

Q1. Formula for Unit weight of steel rebar
Ans. 
Unit weight of steel rebar is calculated using a specific formula based on the dimensions of the rebar.
• Unit weight of steel rebar = (D^2/162.2) * L, where D is the diameter of the rebar in inches and L is the length of the rebar in feet.

• The formula is derived from the weight of a steel bar per foot, which is 3.4 pounds for a rebar with a diameter of one inch.

• For example, a steel rebar with a diameter of 0.5 inches and ...read more
Answered by AI
View 1 more answer

Q1. Concrete pouring method
Ans. 
Concrete pouring method involves the process of placing and compacting concrete into a formwork to create a solid structure.
• Ensure formwork is properly prepared and secured before pouring concrete

• Use appropriate equipment such as concrete pumps or buckets for pouring

• Monitor concrete flow and consistency to avoid segregation or honeycombing

• Properly compact the concrete to remove air voids and ensure strength

• Allow suffic...read more
Answered by AI
Add your answer
Q2. Shuttering of columns
Ans. 
Shuttering of columns is the process of creating temporary formwork to support concrete until it sets.
• Shuttering is usually made of plywood, timber, or steel.

• It is important to ensure the shuttering is properly supported and aligned before pouring concrete.

• The shuttering should be removed after the concrete has set to the required strength.

• Properly designed and constructed shuttering helps in achieving a smooth and uni
Answered by AI
Add your answer
Q3. Reinforcement checking checklist points
Add your answer
Q4. Tiles placing method
Ans. 
Tiles can be placed using various methods such as grid layout, random pattern, or specific design layout.
• Tiles can be placed in a grid layout for a uniform and organized look.

• Random pattern placement can create a more eclectic and unique design.

• Specific design layout involves placing tiles according to a pre-determined pattern or design.

• Consider factors like tile size, shape, color, and grout spacing when deciding on t
Answered by AI
Add your answer
Q5. Flooring method for stone work
Ans. 
The flooring method for stone work typically involves using mortar or adhesive to secure the stones in place.
• Prepare the subfloor by ensuring it is clean, level, and dry

• Apply mortar or adhesive to the back of each stone before placing it on the subfloor

• Use spacers to maintain consistent spacing between stones

• Allow the mortar or adhesive to dry completely before grouting the joints

• Seal the finished stone floor to protec
Answered by AI
Add your answer

Q1. What is the weight of one bag cement
Ans. 
The weight of one bag of cement varies depending on the country and type of cement.
• The weight of one bag of cement is typically between 25kg and 50kg.

• In the United States, a bag of Portland cement usually weighs 94 pounds (42.6kg).

• In Europe, a bag of cement typically weighs 50kg.

• Different types of cement, such as lightweight cement, may have different weights per bag.
Answered by AI
View 12 more answers
Q2. What is initial setting time of cement
Ans. 
Initial setting time of cement is the time taken for the cement paste to harden sufficiently to resist certain specified pressure.
• Initial setting time is an important property of cement as it determines the time available for mixing, placing, and finishing of concrete.

• It is measured by the Vicat apparatus, which consists of a needle and a mould filled with cement paste.

• The initial setting time is typically around 30 mi...read more
Answered by AI
View 5 more answers
Q3. What is the size of concrete cube
Ans. 
The size of a concrete cube refers to its dimensions, typically measured in millimeters.
• The size of a concrete cube is usually specified by the engineer or client.

• Common sizes for concrete cubes are 150mm, 200mm, and 300mm.

• The size of the cube is important for testing the compressive strength of the concrete.

• The cubes are typically cast and cured for a specific period before testing.
Answered by AI
View 7 more answers
Q4. What is the minimum diameter for doweals bar
Ans. 
The minimum diameter for dowel bars depends on the specific application and design requirements.
• The minimum diameter for dowel bars is typically specified in the project's design documents or specifications.

• It is important to consider factors such as the load transfer requirements, concrete strength, and spacing between dowel bars when determining the minimum diameter.

• In general, dowel bars for pavement joints are comm...read more
Answered by AI
View 3 more answers

Q1. What is the lap length of bars for compperision zone
Ans. 
The lap length of bars for compression zone is the minimum length required to ensure proper transfer of stress between two overlapping bars.
• The lap length is determined based on the diameter of the bars, concrete strength, and the bond strength between the bars and concrete.

• It is important to provide adequate lap length to prevent failure due to inadequate bond between the bars and concrete.

• The lap length for compressi...read more
Answered by AI
View 3 more answers
Q2. What is the minimum alowable ph value of water
Ans. 
The minimum allowable pH value of water is 6.5.
• The minimum allowable pH value of water is determined by various regulatory bodies and standards.

• For drinking water, the World Health Organization recommends a minimum pH of 6.5 to prevent corrosion of pipes and plumbing fixtures.

• In some industrial processes, a minimum pH of 6.0 or even lower may be required.

• Water with a pH below the minimum allowable value may be consider...read more
Answered by AI
View 2 more answers

STEEL WEIGHT, BBS,COVER BLOCK

Q1. LAYOUT, DRAWING READING
Add your answer