Upload Button Icon Add office photos

Filter interviews by

Shreeyam Power And Steel Industries Mechanical Maintenance Engineer Interview Questions and Answers

Updated 31 Oct 2023

Shreeyam Power And Steel Industries Mechanical Maintenance Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Lobe compressor pressure maintain
  • Ans. 

    Maintaining pressure in a lobe compressor is crucial for efficient operation and preventing damage.

    • Regularly check and adjust the discharge pressure setting on the compressor control panel

    • Inspect and replace any worn or damaged seals or gaskets to prevent leaks

    • Monitor the temperature of the compressor to ensure it is operating within safe limits

    • Keep the intake filters clean to prevent blockages and maintain proper airf...

  • Answered by AI
  • Q2. .5 bar pressure maintain in lobe compressor
  • Ans. 

    To maintain 0.5 bar pressure in a lobe compressor, check for leaks, adjust pressure settings, monitor temperature, and ensure proper lubrication.

    • Check for leaks in the compressor system

    • Adjust pressure settings on the compressor control panel

    • Monitor temperature to prevent overheating

    • Ensure proper lubrication of compressor components

  • Answered by AI

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(10 Questions)

  • Q1. Types of gearbox
  • Ans. 

    Types of gearboxes include spur, helical, bevel, worm, planetary, and cycloidal.

    • Spur gearbox: simple and efficient, used in low-speed applications

    • Helical gearbox: smoother operation, higher load capacity

    • Bevel gearbox: used for right angle drives

    • Worm gearbox: high reduction ratios, self-locking feature

    • Planetary gearbox: compact design, high torque transmission

    • Cycloidal gearbox: high shock load capacity, low backlash

  • Answered by AI
  • Q2. What is difference between tensioning and torqueing
  • Ans. 

    Tensioning involves stretching a fastener to a specific load, while torqueing involves tightening a fastener to a specific torque value.

    • Tensioning is typically used for critical applications where precise load control is required.

    • Torqueing is more commonly used in general applications where a specific torque value is sufficient.

    • Tensioning is often used in applications like bolted joints in bridges or aircraft structure...

  • Answered by AI
  • Q3. What is the main reason of gearbox failure
  • Ans. 

    The main reason for gearbox failure is lack of lubrication, leading to increased friction and wear.

    • Lack of proper lubrication causing increased friction

    • Contamination of lubricant with dirt or debris

    • Overloading the gearbox beyond its capacity

    • Improper maintenance and servicing

    • Manufacturing defects or poor quality materials

    • Incorrect alignment of gears

  • Answered by AI
  • Q4. Difference between two stroke and four stroke engine
  • Ans. 

    Two stroke engines have power strokes every revolution, while four stroke engines have power strokes every other revolution.

    • Two stroke engines have a simpler design with fewer moving parts compared to four stroke engines

    • Two stroke engines require a fuel-oil mixture for lubrication, while four stroke engines have a separate oil reservoir

    • Two stroke engines produce more pollution due to incomplete combustion, while four s...

  • Answered by AI
  • Q5. How WTG generate electricity
  • Ans. 

    Wind Turbine Generators (WTG) generate electricity through the conversion of wind energy into mechanical energy and then into electrical energy.

    • Wind turns the blades of the turbine

    • Blades are connected to a rotor

    • Rotor spins a generator to produce electricity

    • Electricity is then sent to a transformer for distribution

    • Example: Vestas V164-9.5 MW wind turbine

  • Answered by AI
  • Q6. Why we use fluid coupling
  • Ans. 

    Fluid couplings are used to transmit power from one shaft to another without direct physical contact, allowing for smooth start-ups and overload protection.

    • Fluid couplings help in gradual acceleration of heavy machinery, reducing stress on the equipment

    • They provide overload protection by slipping when the torque exceeds a certain limit

    • Fluid couplings dampen torsional vibrations, reducing wear and tear on the machinery

    • T...

  • Answered by AI
  • Q7. Why gear box use
  • Ans. 

    Gear boxes are used to transmit power from one component to another while changing the speed and torque of the output.

    • Gear boxes allow for speed and torque conversion between input and output shafts

    • They provide mechanical advantage by increasing or decreasing speed and torque

    • Used in various applications such as automobiles, industrial machinery, and power transmission systems

  • Answered by AI
  • Q8. Did you know about generator alignment
  • Ans. 

    Yes, generator alignment is crucial for efficient operation and preventing damage.

    • Generator alignment ensures that the rotating parts are properly positioned to prevent vibration and wear

    • Improper alignment can lead to increased maintenance costs and reduced efficiency

    • Alignment methods include laser alignment, dial indicators, and alignment jigs

    • Regular alignment checks should be performed to ensure optimal performance

    • Ex...

  • Answered by AI
  • Q9. Which gear is used in gearbox
  • Ans. 

    Various types of gears can be used in a gearbox depending on the application, such as spur gears, helical gears, bevel gears, and worm gears.

    • Spur gears are commonly used in applications where simplicity and cost-effectiveness are important.

    • Helical gears are used when smooth and quiet operation is required.

    • Bevel gears are used to transmit motion between intersecting shafts.

    • Worm gears are used for high reduction ratios a...

  • Answered by AI
  • Q10. Why aviation lamp is use in wtg
  • Ans. 

    Aviation lamps are used in wind turbine generators (WTG) for aircraft safety and navigation purposes.

    • Aviation lamps help to make the wind turbine visible to aircrafts, reducing the risk of collisions.

    • They also aid in navigation by marking the location of the wind turbine for pilots.

    • The use of aviation lamps is a regulatory requirement to ensure air traffic safety around wind turbines.

    • Different colors of aviation lamps ...

  • Answered by AI

I applied via Walk-in and was interviewed in Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 
Round 3 - Technical 

(1 Question)

  • Q1. Technical question and objectives question

Interview Preparation Tips

Interview preparation tips for other job seekers - This is a best company and work culture is very good
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Present working in knowledge me

I appeared for an interview in Mar 2017.

Interview Questionnaire 

1 Question

  • Q1. Questions about my current department like that which type system installed and which company.

Interview Preparation Tips

Round: Technical + HR Interview
Experience: Within 1hrs interview is done and the interviewer is asked me about current system working function and problem and how to solve the problem.

Skills: Technical Questions

I applied via Campus Placement

Interview Questionnaire 

2 Questions

  • Q1. Explain about your previous intern
  • Ans. 

    I interned at XYZ Company as a mechanical engineer.

    • Assisted in designing and testing new products

    • Collaborated with team members to improve manufacturing processes

    • Conducted research on materials and their properties

    • Created technical drawings and schematics using CAD software

  • Answered by AI
  • Q2. Explain your family background
  • Ans. 

    My family background is diverse and multicultural.

    • My parents are from different countries and cultures.

    • I grew up speaking multiple languages at home.

    • My family values education and hard work.

    • We have a strong sense of community and support for each other.

    • My grandparents were immigrants who worked hard to provide for their families.

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had a decent resume and a good grade and hence was confident on getting through this phase.
Tips: Devote sufficient time for resume preparation and come up with a catchy resume that will ensure that you are shortlisted.

Round: Technical Interview
Experience: I had good knowledge of what I had done in my previous intern and elaborated the experience. I tried not to exaggerate and gave crisp answers only.
Tips: Be confident in what you utter.

Round: HR Interview
Experience: Based on previous candidates. I knew that the interview was long and took the freedom to presume it will be same for me and gave an elaborate answer.

General Tips: Be confident of your own profile and try to sell yourself as a product to them. Show your worth rather than your weaknesses in the front.
Skills: Course Grades, Enthusiasm
Duration: 2
College Name: IIT Madras
Motivation: I wanted to do a core intern and such a reputed company with versatile domains was a preferred choice.

I applied via Referral and was interviewed before Jul 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. They will ask for your previous job profile and basic of electrical. Not much more theoretical, major part is practical

Interview Preparation Tips

Interview preparation tips for other job seekers - If you have a experience in same field you will able to handle questions easi

I applied via Walk-in and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Tell me basic mechanical work regarding to wind turbine ?
  • Ans. 

    Basic mechanical work in wind turbines includes maintenance, troubleshooting, and repair of components such as blades, gearbox, and generator.

    • Inspecting and repairing wind turbine blades for damage or wear

    • Performing regular maintenance on gearbox and generator

    • Troubleshooting and repairing electrical and mechanical issues

    • Replacing faulty components like bearings, gears, or sensors

    • Performing alignment and balancing of ro...

  • Answered by AI
  • Q2. Tell me about maintenance?
  • Ans. 

    Maintenance is the process of ensuring the proper functioning and longevity of equipment, machinery, or infrastructure.

    • Maintenance involves regular inspections, repairs, and replacements to prevent breakdowns and extend the lifespan of assets.

    • It includes tasks such as lubrication, cleaning, calibration, and troubleshooting.

    • Preventive maintenance aims to identify and address potential issues before they cause major prob...

  • Answered by AI
  • Q3. What was your role in previous company?

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be nervous, if u are freshers then told about your educational project, technical skill and if u are experienced then talk about your job role in last company, don't need to panic just stay calm and answered.

Interview Questionnaire 

2 Questions

  • Q1. I am working job in adani port mudra maintenance mechanical
  • Q2. My study mechanical engineering so I have applied in maintenance mechanical engineer

Interview Questionnaire 

1 Question

  • Q1. Power system

Shreeyam Power And Steel Industries Interview FAQs

How many rounds are there in Shreeyam Power And Steel Industries Mechanical Maintenance Engineer interview?
Shreeyam Power And Steel Industries interview process usually has 2 rounds. The most common rounds in the Shreeyam Power And Steel Industries interview process are Resume Shortlist and One-on-one Round.
What are the top questions asked in Shreeyam Power And Steel Industries Mechanical Maintenance Engineer interview?

Some of the top questions asked at the Shreeyam Power And Steel Industries Mechanical Maintenance Engineer interview -

  1. .5 bar pressure maintain in lobe compres...read more
  2. Lobe compressor pressure maint...read more

Tell us how to improve this page.

Shreeyam Power And Steel Industries Mechanical Maintenance Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Adani Power Interview Questions
3.9
 • 229 Interviews
Adani Group Interview Questions
3.9
 • 199 Interviews
Tata Power Interview Questions
3.9
 • 164 Interviews
Suzlon Group Interview Questions
4.1
 • 131 Interviews
Torrent Power Interview Questions
3.7
 • 131 Interviews
Eaton Interview Questions
3.9
 • 122 Interviews
Reliance Power Interview Questions
4.1
 • 47 Interviews
Enphase Energy Interview Questions
2.9
 • 43 Interviews
Inox Wind Interview Questions
3.7
 • 38 Interviews
View all
17% less than the average Mechanical Maintenance Engineer Salary in India
View more details

Shreeyam Power And Steel Industries Mechanical Maintenance Engineer Reviews and Ratings

based on 3 reviews

3.7/5

Rating in categories

4.1

Skill development

4.1

Work-life balance

2.8

Salary

5.0

Job security

3.7

Company culture

2.4

Promotions

3.7

Work satisfaction

Explore 3 Reviews and Ratings
Assistant Engineer
28 salaries
unlock blur

₹2.2 L/yr - ₹4.8 L/yr

Assistant Manager
19 salaries
unlock blur

₹5.2 L/yr - ₹10 L/yr

Mechanical Maintenance Engineer
9 salaries
unlock blur

₹3.4 L/yr - ₹4.4 L/yr

Mechanical Engineer
9 salaries
unlock blur

₹2.5 L/yr - ₹4.8 L/yr

Boiler DCS Engineer
8 salaries
unlock blur

₹3 L/yr - ₹6.2 L/yr

Explore more salaries
Compare Shreeyam Power And Steel Industries with

Suzlon Group

4.1
Compare

Adani Power

3.9
Compare

Adani Group

3.9
Compare

Torrent Power

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview