Upload Button Icon Add office photos

Filter interviews by

Shindengen Junior Engineer Production Interview Questions and Answers

Updated 20 Aug 2024

Shindengen Junior Engineer Production Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Self. Introduction
  • Q2. Total years of experience and about experience role
  • Ans. 

    I have 3 years of experience working as a Junior Engineer in production roles.

    • I have 3 years of experience in production roles

    • Experience includes working as a Junior Engineer

    • Familiar with production processes and procedures

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. About work experience
  • Q2. About production planning

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be Nerves

Interview questions from similar companies

I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. I am sharing all questions in advice box..

Interview Preparation Tips

Interview preparation tips for other job seekers - Firstly asked me to tell something about myself.. He had some queried about my responsibilities for my family . After cleared those he asked about my working experience, safety related questions.
After that he started to ask me some questions from design of machine which i could not make him satisfy with my answer
Then he asked about my favourite topic during diploma engineering.. as i said him IC engine, steam engine, heat transfer, pump he started to ask questions from there like what is engine, types, d/f among them , volumetric efficiency, stroke length, compression ratio, turbocharger, pump working principle etc..
I attended those all
After that he gave some info about site environment, and asked to me that i m ok with it or not..
That's it..
Be confident and be honest are the key to crack L&T interview..
Good luck
Thank you

I was interviewed in May 2019.

Interview Questionnaire 

2 Questions

  • Q1. How many types off bricks are uses in construction..
  • Ans. 

    There are several types of bricks used in construction, including clay bricks, concrete bricks, and fire bricks.

    • Clay bricks are the most common type of brick used in construction.

    • Concrete bricks are made from cement, sand, and water and are used for their strength and durability.

    • Fire bricks are designed to withstand high temperatures and are used in fireplaces, ovens, and kilns.

    • Other types of bricks include sand-lime b...

  • Answered by AI
  • Q2. Now can control the many critical conditions on site.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in May 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Transfermar kya hai
  • Q2. Types of motar 2phage
  • Ans. 

    Types of mortar in 2 phase include dry pack mortar and wet pack mortar.

    • Dry pack mortar is a stiff mixture of sand, cement, and water used for filling gaps and cracks.

    • Wet pack mortar is a fluid mixture of sand, cement, and water used for laying bricks and stones.

    • Other types of mortar include lime mortar, cement mortar, and epoxy mortar.

  • Answered by AI
Round 2 - Aptitude Test 

Language English Hindi

Round 3 - Technical 

(2 Questions)

  • Q1. Power generation
  • Q2. Circuit kinte prakar ki hoti hai
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jun 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

11KV line and structure question

Round 3 - Assignment 

Structure work and working experience whose company work

Round 4 - HR 

(2 Questions)

  • Q1. Continue work and salary and location
  • Q2. Kitna salary loge kahan per location

Interview Preparation Tips

Interview preparation tips for other job seekers - Working good and senior manager very happy all staff is good and appreciate of work.

I was interviewed before Jun 2021.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About basic concepts of electrical and about my previous company
Round 3 - One-on-one 

(1 Question)

  • Q1. About my previous company and about my Trade

Interview Preparation Tips

Interview preparation tips for other job seekers - No thanks Ahsjfinrbfjdjjdncbhdjnsbfhejxb
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is synchronous and histerisis motor
  • Ans. 

    Synchronous motor runs at a constant speed while hysteresis motor has a rotor that follows the rotating magnetic field.

    • Synchronous motor is used in applications where constant speed is required, such as in clocks and timers.

    • Hysteresis motor is used in applications where precise control of speed is required, such as in record players and tape recorders.

    • Synchronous motor has a stator and rotor that rotate at the same spe...

  • Answered by AI
  • Q2. Different between plc and scada
  • Ans. 

    PLC is a hardware device that controls industrial processes, while SCADA is a software system that monitors and controls those processes.

    • PLC is a programmable logic controller that controls the input/output of industrial processes.

    • SCADA is a supervisory control and data acquisition system that collects and analyzes data from the industrial processes.

    • PLC is a hardware device, while SCADA is a software system.

    • PLC is used...

  • Answered by AI
  • Q3. Different between relay and contactor
  • Ans. 

    Relays are used for low power applications while contactors are used for high power applications.

    • Relays are typically used in control circuits to switch low power loads such as lights and fans.

    • Contactors are used to switch high power loads such as motors and compressors.

    • Relays have a lower current rating than contactors.

    • Contactors have larger contacts and can handle higher currents than relays.

    • Relays are typically smal...

  • Answered by AI
  • Q4. Different between switch and relay
  • Ans. 

    Switches are used to control the flow of current in a circuit, while relays are used to switch a circuit on or off.

    • Switches are manually operated, while relays are electrically operated.

    • Switches are used in low voltage applications, while relays are used in high voltage applications.

    • Switches are simple in construction, while relays are more complex.

    • Examples of switches include light switches and toggle switches, while ...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Different between switch and timer
  • Ans. 

    Switch is an electronic component used to connect or disconnect a circuit while a timer is a device used to measure time intervals.

    • Switch is used to turn on/off a device while timer is used to control the duration of a device's operation.

    • Switch is a binary device with two states (on/off) while timer can be analog or digital and can measure time in seconds, minutes, or hours.

    • Examples of switches include light switches, ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrical engineering and electronics engineering

Skills evaluated in this interview

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 4 interview rounds.

Round 1 - Aptitude Test 

Electrical related questions

Round 2 - HR 

(7 Questions)

  • Q1. Technical questions
  • Q2. Related to job for junior engineer
  • Ans. 

    I have raedy to job for office or work from Home

  • Answered by Pallavi Patil
  • Q3. Job time is part time
  • Q4. Salary of a month
  • Q5. Which post to join to company
  • Q6. All doubts to ask
  • Q7. I ask to my question to join company process is very fast
  • Ans. 

    I mean reply me to HR for job

  • Answered by Pallavi Patil
Round 3 - One-on-one 

(4 Questions)

  • Q1. Which is a product manufacturers this company
  • Q2. Something ask for junior engineer job
  • Q3. Discussion with company for job
  • Q4. Discussion with staff members
Round 4 - Assignment 

Related to electrical engineering bases

Interview Preparation Tips

Interview preparation tips for other job seekers - As a junior engineer
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Last job salary and experience details.
Round 2 - Technical 

(1 Question)

  • Q1. Job related technical questions like rolling mill, especially drives.
Round 3 - HR 

(1 Question)

  • Q1. Salary negotiation.

Interview Preparation Tips

Interview preparation tips for other job seekers - Specialist on Rolling mill and Drive..
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Technical questions, thermal application, theory of machine,
  • Q2. Any thermal application related questions.
Round 3 - HR 

(3 Questions)

  • Q1. RAC and theory of machine
  • Ans. 

    RAC stands for Refrigeration and Air Conditioning, while Theory of Machines deals with the study of machines and their mechanisms.

    • RAC involves the study of refrigeration cycles, air conditioning systems, and heat transfer processes.

    • Theory of Machines focuses on the design, analysis, and operation of machines like engines, turbines, and gears.

    • Understanding RAC is essential for designing efficient cooling systems, while ...

  • Answered by AI
  • Q2. RAC and theory of machine som
  • Ans. 

    RAC stands for Refrigeration and Air Conditioning. Theory of Machines is a branch of mechanical engineering that deals with the study of machines.

    • RAC involves the study of refrigeration cycles, air conditioning systems, and heat transfer processes.

    • Theory of Machines focuses on the design, analysis, and operation of machines like engines, gears, and mechanisms.

    • Understanding RAC is important for designing efficient cooli...

  • Answered by AI
  • Q3. Basic Tharmal , machine design

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Junior Engineer interview:
  • Tharmal application
  • Theory of machine
  • Rafegiration and condensed
Interview preparation tips for other job seekers - Good communication skills.

Shindengen Interview FAQs

How many rounds are there in Shindengen Junior Engineer Production interview?
Shindengen interview process usually has 2 rounds. The most common rounds in the Shindengen interview process are HR and Technical.

Tell us how to improve this page.

Shindengen Junior Engineer Production Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 432 Interviews
Qualcomm Interview Questions
3.8
 • 274 Interviews
ABB Interview Questions
4.1
 • 232 Interviews
Intel Interview Questions
4.2
 • 223 Interviews
Havells Interview Questions
4.0
 • 209 Interviews
Tata Power Interview Questions
3.9
 • 162 Interviews
Texas Instruments Interview Questions
4.1
 • 125 Interviews
Bajaj Electricals Interview Questions
4.0
 • 124 Interviews
BHEL Interview Questions
4.1
 • 109 Interviews
View all
Shindengen Junior Engineer Production Salary
based on 6 salaries
₹3.6 L/yr - ₹4.2 L/yr
19% more than the average Junior Engineer Production Salary in India
View more details

Shindengen Junior Engineer Production Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

4.0

Work-life balance

3.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Junior Engineer
41 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Supervisor
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Operator
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Shindengen with

BHEL

4.1
Compare

Tata Power

3.9
Compare

Havells

4.0
Compare

Crompton Greaves Consumer Electricals

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview