Upload Button Icon Add office photos

Filter interviews by

Saurashtra Chemicals Mechanical Engineer Interview Questions and Answers

Updated 30 Sep 2023

Saurashtra Chemicals Mechanical Engineer Interview Experiences

1 interview found

Mechanical Engineer Interview Questions & Answers

user image Raval Dhruvil Jitendrakumar

posted on 12 Dec 2022

I applied via Campus Placement and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. About pump, blower and compressor
  • Q2. Types of maintenance
  • Ans. 

    Types of maintenance include preventive, predictive, corrective, and proactive maintenance.

    • Preventive maintenance involves regular inspections and maintenance to prevent breakdowns.

    • Predictive maintenance uses data and analytics to predict when equipment will need maintenance.

    • Corrective maintenance is performed after a breakdown has occurred to restore equipment to working condition.

    • Proactive maintenance involves identi...

  • Answered by AI

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-

I applied via campus placement at Central Institute of Plastics Engineering and Technology, Haldia and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Aptitude Test 

Logical reasoning, quant, verbal

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Sep 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Required knowledge of various types of pump with mechanical and their moc and application
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. GLR, pump, compressor, cooling tower, Graphite type heat exchanger
  • Q2. Inlet temp and out let temp

Interview Preparation Tips

Interview preparation tips for other job seekers - Glass line reactor, chiller, cooling tower, pump, compressor,
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(5 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Ans. 

    Father is former and mother is house wife 

  • Answered Anonymously
  • Q3. Share details of your previous job.
  • Ans. 

    Velox motors Maruti Suzuki as a body shop advisor 

  • Answered Anonymously
  • Q4. Why should we hire you?
  • Ans. 

    Because I am eligible for godrej 

  • Answered Anonymously
  • Q5. Tell me about yourself.
  • Ans. 

    I am Adarsh Pandey I am 26 year old leave in Mumbai and complete Mechanical automobile diploma my father is former and mother is house wife 

  • Answered Anonymously
Interview experience
4
Good
Difficulty level
-
Process Duration
Less than 2 weeks
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Selection for me Good communication
  • Q2. Selection for me Technical knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - Good communication for student selection and knowledge of courses degree diploma and skills hard work positive attitude
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Mar 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Assignment 

Written test of Core subjects

Round 3 - HR 

(1 Question)

  • Q1. Introduction, Internship,Aim
Round 4 - HR 

(1 Question)

  • Q1. Dream , Resume ,Project , Motive

I applied via Walk-in and was interviewed in Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Management study skill development progress program.

Round 3 - HR 

(6 Questions)

  • Q1. Hr management about this faculty was very clearly and not one number or skill products or party seller
  • Q2. Travels seller products addition management security hr or system
  • Q3. About this conditions roll or human resources company management
  • Q4. Security lock sweeper
  • Q5. Engineer security level or lock faculty system
  • Q6. Humbled flexible strike advisor company sellers

Interview Preparation Tips

Topics to prepare for Atul Diploma Mechanical Engineer interview:
  • Culture party techancal
  • System Administration
  • Operating Systems
  • Party Reconciliation
  • Interviewing
  • Communication Skills
  • Selling
Interview preparation tips for other job seekers - May I help you giving this advice suggest better life genuinely seriously person about this company company or company management hr
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Mar 2023. There were 2 interview rounds.

Round 1 - Technical 

(8 Questions)

  • Q1. Explain refrigeration cycle.
  • Ans. 

    Refrigeration cycle is a process in which refrigerant absorbs heat from a low-temperature space and rejects it in a high-temperature space.

    • Refrigerant absorbs heat from the low-temperature space (evaporator)

    • Refrigerant is compressed to increase its temperature and pressure

    • High-temperature refrigerant releases heat in the condenser

    • Refrigerant expands in the expansion valve to lower its temperature and pressure

    • Cycle repe

  • Answered by AI
  • Q2. Explain various types of pumps with its characteristics curves
  • Ans. 

    Various types of pumps with characteristics curves

    • Centrifugal pumps: high flow rates, low pressure, used in HVAC systems

    • Reciprocating pumps: high pressure, low flow rates, used in hydraulic systems

    • Diaphragm pumps: positive displacement, used for metering and dosing applications

    • Gear pumps: used for lubrication systems, constant flow rate

    • Axial flow pumps: high flow rates, low head, used in irrigation systems

  • Answered by AI
  • Q3. What is range of cooling tower.
  • Ans. 

    The range of a cooling tower typically varies based on the size and capacity of the unit.

    • The range of a cooling tower can vary from small residential units to large industrial units.

    • Smaller cooling towers may have a range of a few tons of cooling capacity, while larger industrial cooling towers can have a range of hundreds or even thousands of tons.

    • The range of a cooling tower is typically measured in terms of cooling ...

  • Answered by AI
  • Q4. What is approach of cooling tower.
  • Ans. 

    Cooling towers are heat rejection devices that use water to transfer heat from a system into the atmosphere.

    • Cooling towers work on the principle of evaporation to remove heat from the water being circulated through the tower.

    • The hot water is pumped to the top of the tower and distributed over the fill or packing, where it is exposed to air.

    • As the water flows over the fill, some of it evaporates, which removes heat from...

  • Answered by AI
  • Q5. Why deaerator is being placed at higher elevation?
  • Ans. 

    Deaerator is placed at higher elevation to create a pressure difference for efficient removal of dissolved gases from feedwater.

    • Higher elevation creates a pressure difference which aids in the removal of dissolved gases from feedwater

    • This helps in preventing corrosion in the boiler system

    • It also improves the efficiency of the boiler by reducing the amount of oxygen in the feedwater

  • Answered by AI
  • Q6. What is LP dosing?
  • Ans. 

    LP dosing refers to the process of injecting a low pressure chemical solution into a system or process.

    • LP dosing is commonly used in water treatment plants to add chemicals such as chlorine or coagulants to the water supply.

    • It is also used in industrial processes to introduce additives or inhibitors into pipelines or equipment.

    • LP dosing systems typically consist of a pump, piping, and injection point where the chemical...

  • Answered by AI
  • Q7. What is stroke length of reciprocating compressor?
  • Ans. 

    Stroke length of a reciprocating compressor is the distance the piston travels from top dead center to bottom dead center.

    • Stroke length is an important parameter in determining the displacement volume of the compressor.

    • It is typically measured in inches or millimeters.

    • For example, a reciprocating compressor with a stroke length of 4 inches will have a piston that travels 4 inches up and down within the cylinder.

    • Stroke ...

  • Answered by AI
  • Q8. What is surging and choking in centrifugal compressor?
  • Ans. 

    Surging and choking are two common operating conditions in centrifugal compressors.

    • Surging occurs when the flow rate through the compressor is reduced to the point where the compressor cannot maintain a stable flow and pressure. This leads to a pulsating flow and can cause damage to the compressor.

    • Choking happens when the flow rate through the compressor is increased to the point where the compressor cannot handle the ...

  • Answered by AI
Round 2 - HR 

(3 Questions)

  • Q1. Why do you want to join our company?
  • Q2. Why should we hire you?
  • Q3. Explain briefly about yourself.

I applied via Naukri.com

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Pump curve, boiler related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - All questions will be from you resume only

Saurashtra Chemicals Interview FAQs

How many rounds are there in Saurashtra Chemicals Mechanical Engineer interview?
Saurashtra Chemicals interview process usually has 2 rounds. The most common rounds in the Saurashtra Chemicals interview process are Resume Shortlist and Technical.
What are the top questions asked in Saurashtra Chemicals Mechanical Engineer interview?

Some of the top questions asked at the Saurashtra Chemicals Mechanical Engineer interview -

  1. Types of maintena...read more
  2. About pump, blower and compres...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Saurashtra Chemicals interview
Campus Placement
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
Saurashtra Chemicals Mechanical Engineer Salary
based on 38 salaries
₹2.4 L/yr - ₹7.8 L/yr
10% more than the average Mechanical Engineer Salary in India
View more details

Saurashtra Chemicals Mechanical Engineer Reviews and Ratings

based on 10 reviews

3.7/5

Rating in categories

3.9

Skill development

4.0

Work-Life balance

3.2

Salary & Benefits

4.3

Job Security

3.4

Company culture

3.8

Promotions/Appraisal

4.0

Work Satisfaction

Explore 10 Reviews and Ratings
Mechanical Engineer
40 salaries
unlock blur

₹2.4 L/yr - ₹7.8 L/yr

Mechanical Maintenance Engineer
22 salaries
unlock blur

₹2.3 L/yr - ₹7.4 L/yr

Electrical Engineer
20 salaries
unlock blur

₹2.6 L/yr - ₹6.2 L/yr

Senior Engineer
16 salaries
unlock blur

₹8.4 L/yr - ₹14.4 L/yr

Maintenance Engineer
16 salaries
unlock blur

₹2.4 L/yr - ₹5 L/yr

Explore more salaries
Compare Saurashtra Chemicals with

Gujarat Alkalies & Chemicals

4.5
Compare

Tata Chemicals

4.1
Compare

Pidilite Industries

4.3
Compare

UPL

4.1
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview