Add office photos
Filter interviews by
Sankalpan Infrastructure Electrical Engineer - MEP Interview Questions and Answers
Sankalpan Infrastructure Electrical Engineer - MEP Interview Experiences
1 interview found
I applied via Approached by Company and was interviewed before Aug 2021. There were 3 interview rounds.
(1 Question)
- Q1. Electrical Load calculation, ELV system, HVAC system design related questions.
(1 Question)
- Q1. Package and flexibility of works
Interview Preparation Tips
- Electrical Engineering
- ELV
- HVAC System
Top trending discussions
Interview questions from similar companies
Electrical Engineer Interview Questions & Answers
VIKRAN Engineering & Exim
Anonymous
posted on 22 Dec 2024
(2 Questions)
- Q1. What is the output voltage of an AAAC Rabbit conductor?
- Ans.
The output voltage of an AAAC Rabbit conductor is typically around 600 volts.
The output voltage of an AAAC Rabbit conductor is usually around 600 volts.
The exact output voltage may vary depending on the specific application and conditions.
It is important to consult the manufacturer's specifications for accurate information.
- Q2. What is your execution work plan?
- Ans.
My execution work plan involves setting clear goals, creating a timeline, assigning tasks, monitoring progress, and adjusting as needed.
Set clear goals and objectives for the project
Create a detailed timeline with milestones and deadlines
Assign tasks to team members based on their strengths and expertise
Regularly monitor progress and make adjustments as needed
Communicate effectively with team members and stakeholders
Ut...
Interview Preparation Tips
Electrical Site Engineer Interview Questions & Answers
Hyundai Engineering
Anonymous
posted on 1 Nov 2023
Selected
I applied via AmbitionBox and was interviewed in Oct 2023. There was 1 interview round.
(3 Questions)
- Q1. How mane year experience
- Q2. I'm interested sir
- Q3. Total 18 year experience in power plant & oil and gas plant
- Ans.
I have a total of 18 years of experience in power plant and oil and gas plant.
Experience includes working on various projects in power plant and oil and gas plant
Knowledge of electrical systems, equipment, and regulations in these industries
Hands-on experience in maintenance, troubleshooting, and project management
Strong understanding of safety protocols and procedures in high-risk environments
Selected
I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.
(2 Questions)
- Q1. About Experience in my present work
- Q2. About present company work profile
Interview Preparation Tips
Electrical Site Engineer Interview Questions & Answers
Balajee Group
Anonymous
posted on 28 Jul 2023
Selected
I applied via Company Website and was interviewed in Jan 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Find your information
- Q2. Site Work related questions
(1 Question)
- Q1. Project Related questions
Interview Preparation Tips
Electrical Engineer Interview Questions & Answers
The Louis Berger Group
Anonymous
posted on 17 Jan 2021
I applied via Referral
Interview Questionnaire
2 Questions
- Q1. I was asked about power Converters.
- Q2. I was asked about Traction Transformers
Interview Preparation Tips
Electrical Supervisor Interview Questions & Answers
VIKRAN Engineering & Exim
Anonymous
posted on 10 Feb 2024
I applied via Recruitment Consulltant and was interviewed in Jan 2024. There were 3 interview rounds.
Technical related questions and answers
My last company name
(5 Questions)
- Q1. Last company name and years of experience
- Q2. Last company CTC
- Ans.
My last company CTC was $60,000 per year.
My last company CTC was $60,000 per year
CTC stands for Cost to Company
It includes salary, bonuses, benefits, and any other perks
- Q3. Expected your CTC
- Q4. Notice period for company
- Q5. You will join the company after receiving the joining letter.
Interview Preparation Tips
Electrical Supervisor Interview Questions & Answers
Hyundai Engineering
Anonymous
posted on 2 Nov 2022
I applied via Recruitment Consulltant
(4 Questions)
- Q1. Electrical Construction Free Commissioning Activity
- Q2. HV..MV..VSD.AFD.MCC.LV UPS.PP.PDP..LP..ELP Cable Meggering laying & glanding Termination. Testing equipments Motor Solo run testing
- Q3. Earth pit testing free commissioning
- Q4. Motor Solo Run Testing
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Jan 2021. There were 3 interview rounds.
Interview Questionnaire
6 Questions
- Q1. What are the equipment use to substation?
- Ans.
Substations use various equipment for power distribution and control.
Transformers: Step up or step down voltage levels.
Circuit breakers: Protect the system from overloads and faults.
Switchgear: Control and isolate electrical circuits.
Busbars: Distribute power to different parts of the substation.
Relays: Monitor and protect the system from abnormalities.
Capacitors: Improve power factor and voltage stability.
Disconnect s...
- Q2. What is CT's and PT's and LA's and Transformers?
- Ans.
CTs, PTs, LAs, and Transformers are electrical devices used in power systems for measurement, protection, and voltage transformation.
CTs (Current Transformers) are used to measure and transform high currents into manageable levels for instruments and relays.
PTs (Potential Transformers) are used to measure and transform high voltages into low voltages for instruments and relays.
LAs (Lightning Arresters) are used to prot...
- Q3. What are use of circuit breaker?
- Ans.
Circuit breakers are safety devices that protect electrical circuits from damage caused by overload, short circuit, or ground fault.
Circuit breakers are used to prevent damage to electrical equipment and wiring.
They interrupt the flow of electricity when there is an overload, short circuit, or ground fault.
Circuit breakers are commonly used in homes, businesses, and industrial settings.
They come in different sizes and ...
- Q4. What are rating of copper cable and aluminium cables?
- Ans.
The rating of copper and aluminium cables depends on their size, insulation, and intended use.
Copper cables have higher conductivity and are therefore rated higher than aluminium cables of the same size.
The rating of a cable also depends on its insulation material and thickness.
Cables used for high voltage transmission have higher ratings than those used for low voltage applications.
For example, a 10 AWG copper cable m...
- Q5. What are types of protection on Transformer side line side?
- Ans.
Types of protection on Transformer side line side
Overcurrent protection
Differential protection
Restricted earth fault protection
Overvoltage protection
Under voltage protection
- Q6. What are type of relays used to protection system?
- Ans.
Different types of relays are used for protection system such as overcurrent, differential, distance, and directional relays.
Overcurrent relays are used to protect against overloads and short circuits.
Differential relays are used to protect transformers and generators from internal faults.
Distance relays are used to protect transmission lines from faults.
Directional relays are used to protect against faults in specific...
Interview Preparation Tips
Electrical Project Engineer Interview Questions & Answers
VIKRAN Engineering & Exim
Anonymous
posted on 11 Apr 2023
Selected
I applied via Walk-in and was interviewed before Apr 2022. There were 3 interview rounds.
(2 Questions)
- Q1. 1.33kv&11kv BOQ 2.Power transformer description 3.what CT/PT will do
- Ans.
The interview question is about 1.33kv&11kv BOQ, power transformer description, and the role of CT/PT.
BOQ for 1.33kv and 11kv involves preparing a bill of quantities for electrical equipment and materials required for the project.
Power transformer description includes its specifications, such as voltage rating, power rating, winding configuration, cooling system, etc.
CT/PT (Current Transformer/Potential Transformer) ar...
- Q2. 4.how to find transformer is star connected or delta connected 5.APL/BPL/AGL material 6.what is ROW..
- Ans.
Answering questions related to electrical engineering
To find if a transformer is star or delta connected, check the connection of the primary and secondary windings
APL/BPL/AGL materials refer to Above Poverty Line/Below Poverty Line/Anti-Graffiti materials used in construction
ROW stands for Right of Way, which is the legal right to pass through a property or land
(2 Questions)
- Q1. Tell me about family background
- Q2. Salary expectations
Interview Preparation Tips
Sankalpan Infrastructure Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Electrical Engineer Interview Questions
- Electrical Technician Interview Questions
- Electrical Supervisor Interview Questions
- Electrical Maintenance Engineer Interview Questions
- Electrical GET Interview Questions
- Diploma Electrical Engineer Interview Questions
- Senior Electrical Engineer Interview Questions
- Junior Engineer Electrical Interview Questions
- Show more
Interview Questions from Similar Companies
Sankalpan Infrastructure Electrical Engineer - MEP Reviews and Ratings
based on 1 review
Rating in categories
|
Interior Designer
6
salaries
|  ₹3.2 L/yr - ₹4.2 L/yr |
|
MEP Engineer
6
salaries
| ₹3 L/yr - ₹5 L/yr |
|
Team Lead
5
salaries
| ₹11.5 L/yr - ₹14.1 L/yr |
|
Assistant Manager
5
salaries
| ₹4 L/yr - ₹7.5 L/yr |
|
Project Manager
5
salaries
| ₹12 L/yr - ₹14.2 L/yr |
Larsen & Toubro Limited
GMR Group
Hindustan Construction Company
IRB Infrastructure
- Home >
- Interviews >
- Sankalpan Infrastructure Interview Questions >
- Sankalpan Infrastructure Electrical Engineer - MEP Interview Questions
