Upload Button Icon Add office photos

Filter interviews by

Saint-Gobain Abrasives Electrical Engineer Interview Questions and Answers

Updated 20 Aug 2023

Saint-Gobain Abrasives Electrical Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. It's relevant to the job description
Round 3 - One-on-one 

(1 Question)

  • Q1. EHS questions is mandatory and then relevant to your job decription
Round 4 - HR 

(1 Question)

  • Q1. Normal questions

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Not Selected
Round 1 - Technical 

(1 Question)

  • Q1. Electrical control system and power control circuit
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Heat trasing maximum valu
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Based on your electrical experience. What are the problems faced and how to rectifiy that technically.
Round 3 - Technical 

(1 Question)

  • Q1. Transformer testing and maintenance.relay testing. Safety standards.

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't nervous keep calm and communicate clearly.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is a motor?
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to produce motion.

    • Converts electrical energy into mechanical energy

    • Produces motion

    • Common types include AC motors and DC motors

  • Answered by AI
  • Q2. What is a transformer?
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Consists of primary and secondary coils

    • Works on the principle of electromagnetic induction

    • Used to step up or step down voltage levels

    • Examples: power transformers, distribution transformers

  • Answered by AI
  • Q3. What is the full name of PCC ?
  • Ans. 

    PCC stands for Power Control Center.

    • PCC is a type of electrical distribution panel used to control power supply to various electrical equipment.

    • It helps in distributing power to different circuits and equipment in an organized manner.

    • PCCs are commonly used in industrial settings to manage power distribution efficiently.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Educational background and career background
Round 3 - Technical 

(1 Question)

  • Q1. Core subject, experience case study achievements
Round 4 - One-on-one 

(1 Question)

  • Q1. Technical backround
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Smart MCC functioning. Electrical Liaison Work, CEIG Annual Inspection, Power Management, Captive Solar Plant Project related.
  • Q2. Cement Mill section Equipment Capacity, Power, TPH, Make etc
Round 3 - Unit Head Round 

(1 Question)

  • Q1. General Questions regarding Job Change, Career Perspective etc.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. What is Dc current ?
  • Ans. 

    DC current is the flow of electric charge in a constant direction.

    • DC stands for Direct Current.

    • It is the type of electric current that flows in a single direction.

    • DC current is produced by sources such as batteries, fuel cells, and solar cells.

    • It is commonly used in electronic devices and power transmission systems.

    • Unlike AC (Alternating Current), DC current does not change its direction over time.

  • Answered by AI
  • Q2. What is Dc Current?
  • Ans. 

    DC current is the flow of electric charge in a single direction.

    • DC stands for Direct Current

    • It is produced by sources such as batteries, fuel cells, and solar cells

    • DC current is used in electronic devices such as computers, televisions, and radios

    • DC current is measured in amperes (A)

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Your job profile un previous company
  • Q2. Technical questions depending on job profile

Interview Preparation Tips

Interview preparation tips for other job seekers - Think twice before joining Cellulosic division of Geasim Undustries. ABG group is great organization to work, but culture at Grasin Cellulosic division is quite different
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Electrical maintenance and troubleshooting all types of Sterter drawing including vfd All types of motor protection Transformer protection
Round 3 - Technical 

(1 Question)

  • Q1. All types of Machine EOT Cranes lift
  • Ans. 

    EOT cranes are used to lift heavy loads in various industries such as construction, manufacturing, and logistics.

    • EOT cranes can lift heavy machinery, equipment, materials, and containers

    • They are commonly used in industries like construction, manufacturing, and logistics

    • EOT cranes have different configurations such as single girder, double girder, and underslung

  • Answered by AI

Saint-Gobain Abrasives Interview FAQs

How many rounds are there in Saint-Gobain Abrasives Electrical Engineer interview?
Saint-Gobain Abrasives interview process usually has 4 rounds. The most common rounds in the Saint-Gobain Abrasives interview process are Resume Shortlist, Technical and One-on-one Round.
What are the top questions asked in Saint-Gobain Abrasives Electrical Engineer interview?

Some of the top questions asked at the Saint-Gobain Abrasives Electrical Engineer interview -

  1. EHS questions is mandatory and then relevant to your job decript...read more
  2. It's relevant to the job descript...read more
  3. Normal questi...read more

Tell us how to improve this page.

Saint-Gobain Abrasives Electrical Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Saint-Gobain Abrasives Electrical Engineer Salary
based on 4 salaries
₹5.7 L/yr - ₹12.1 L/yr
77% more than the average Electrical Engineer Salary in India
View more details

Saint-Gobain Abrasives Electrical Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Area Sales Manager
18 salaries
unlock blur

₹10 L/yr - ₹15 L/yr

Production Engineer
18 salaries
unlock blur

₹4.5 L/yr - ₹8 L/yr

Business Development Engineer
14 salaries
unlock blur

₹4 L/yr - ₹10 L/yr

Area Sales Incharge
10 salaries
unlock blur

₹6.1 L/yr - ₹9 L/yr

Process Engineer
10 salaries
unlock blur

₹3 L/yr - ₹11 L/yr

Explore more salaries
Compare Saint-Gobain Abrasives with

Carborundum Universal Limited

3.9
Compare

Grindwell Norton

4.0
Compare

3M

4.3
Compare

Wendt India

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview