Upload Button Icon Add office photos

Filter interviews by

Sahyadri Industry Assistant Engineer Mechanical Interview Questions and Answers

Updated 13 Nov 2021

Sahyadri Industry Assistant Engineer Mechanical Interview Experiences

1 interview found

I applied via Recruitment Consultant and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Regarding technical and non- technical they asked..
  • Q2. 1. What is the responsibility in your department.

Interview Preparation Tips

Interview preparation tips for other job seekers - Only if we know the question answer we will give answer otherwise sir I don't know.
But we have to show the confidence to them that if we don't know we can learn it and manage it...

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2024. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Heat exchanger related
  • Q2. Vessels and column related
Round 3 - Technical 

(2 Questions)

  • Q1. Hot work and fabrication job related
  • Q2. Plants maintenance related
Round 4 - Technical 

(2 Questions)

  • Q1. Qualification related
  • Q2. Resume related
Round 5 - HR 

(2 Questions)

  • Q1. About salary in that company
  • Q2. Salary discussion

Interview Preparation Tips

Topics to prepare for Aarvi Encon Mechanical Engineer interview:
  • Industrial engineering sestam
  • Stranth of materials
Interview preparation tips for other job seekers - Nokri.com and LinkedIn update
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How do you calculate the displacement of a bike with no tools
  • Ans. 

    To calculate the displacement of a bike without tools, measure the distance traveled in one full rotation of the wheel

    • Measure the circumference of the bike's wheel

    • Count the number of rotations the wheel makes over a certain distance

    • Multiply the circumference by the number of rotations to get the displacement

    • Displacement = Circumference of wheel x Number of rotations

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

They asked about you self development and personality

Round 2 - Group Discussion 

Discuss about the topic fluent

Interview Preparation Tips

Interview preparation tips for other job seekers - Study abou power plant and thermodynamics heat
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical questions
  • Q2. Technical questions i will need job
Round 3 - Technical 

(2 Questions)

  • Q1. Technical questions
  • Q2. I will need job

Mechanical Engineer Interview Questions & Answers

Aarvi Encon user image NAI MAHANDER KUMAR PREMSHANKAR

posted on 14 Nov 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. What is fin fan
  • Q2. What is your qualification
  • Q3. How many types vale
  • Ans. 

    There are several types of valves used in mechanical engineering for controlling the flow of fluids or gases.

    • Types of valves include ball valves, gate valves, globe valves, butterfly valves, check valves, and pressure relief valves.

    • Valves can be classified based on their function (e.g. isolation valves, control valves), design (e.g. rotary valves, linear valves), or material (e.g. brass valves, stainless steel valves).

    • ...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How many expect salary
  • Q2. What is current CTC
  • Ans. 

    Current CTC refers to the total salary package of an individual including all benefits and allowances.

    • Current CTC includes base salary, bonuses, incentives, and other perks.

    • It is important to provide an accurate figure when asked about current CTC.

    • Example: Current CTC is INR 10 lakhs per annum.

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Pump reactor all work expriyans
  • Q2. All plan nolleg boiler utility
Round 2 - One-on-one 

(2 Questions)

  • Q1. Salery discousen
  • Q2. Famely discousen
Round 3 - HR 

(2 Questions)

  • Q1. Pekegg nego silecsone
  • Q2. Joyning notice period
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. 1). Where you have worked?
  • Ans. I told about my past job experience.
  • Answered Anonymously
  • Q2. 2). What is TDC and BDC and how do you understand about it?
  • Ans. 

    TDC stands for Top Dead Center and BDC stands for Bottom Dead Center. They are reference points in the rotation of an engine's crankshaft.

    • TDC is the point where the piston is at its highest position in the cylinder during the compression stroke.

    • BDC is the point where the piston is at its lowest position in the cylinder during the exhaust stroke.

    • Understanding TDC and BDC is crucial for timing engine components such as v...

  • Answered by AI
  • Q3. 3). How you will measure clearance of TDC and BDC for vertical reciprocating compressor ?
  • Ans. 

    The clearance of TDC and BDC for a vertical reciprocating compressor can be measured using a dial indicator.

    • Use a dial indicator to measure the distance between the top dead center (TDC) and bottom dead center (BDC) positions of the piston.

    • Rotate the crankshaft to bring the piston to TDC and set the dial indicator to zero.

    • Rotate the crankshaft to bring the piston to BDC and note the reading on the dial indicator.

    • The di...

  • Answered by AI
  • Q4. 4). How you will measure the clearance for big end bearing ?
  • Ans. 

    The clearance for big end bearing can be measured using a micrometer or a feeler gauge.

    • Use a micrometer to measure the diameter of the crankshaft journal and the inner diameter of the big end bearing. The clearance is calculated by subtracting the crankshaft journal diameter from the bearing inner diameter.

    • Alternatively, a feeler gauge can be used to measure the clearance by inserting the gauge between the crankshaft j...

  • Answered by AI
  • Q5. 5). What thing should focus during the suction and discharge valve box up ?
  • Ans. 

    Focus on proper alignment, tightness, material compatibility, and proper torque during suction and discharge valve box up.

    • Ensure proper alignment of the valves to prevent leakage

    • Check for tightness of the connections to avoid any leaks

    • Use materials compatible with the fluid being handled to prevent corrosion or damage

    • Apply the correct torque to the bolts to ensure a secure connection

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Pumps and Mechanical seals
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Telephonic Call 

(4 Questions)

  • Q1. Tell me about urself Types of Statics equipment u have experience Types of Exchangers,AFCs,vessels jobs and there materials of constructions
  • Q2. Requirement of hydrotest
  • Ans. 

    Hydrotest is a pressure test conducted on pipes, vessels, or equipment to ensure their strength and integrity.

    • Hydrotest is required to ensure that the equipment can withstand the design pressure and prevent leaks or failures.

    • It involves filling the equipment with water or other fluids and pressurizing it to a specified level for a certain duration.

    • The pressure is then released, and the equipment is inspected for any le...

  • Answered by AI
  • Q3. Pressure gauges ranges and requirements.
  • Ans. 

    Pressure gauges are used to measure the pressure of fluids and gases in various industries.

    • Pressure gauges come in different ranges depending on the application.

    • The range of a pressure gauge should be selected based on the maximum pressure expected in the system.

    • The accuracy of the pressure gauge should also be considered when selecting a gauge.

    • Pressure gauges should be calibrated regularly to ensure accurate readings.

    • ...

  • Answered by AI
  • Q4. Heaters internal and external tybesheets related

Interview Preparation Tips

Interview preparation tips for other job seekers - Be cool and calm,be genuine and true to the interviewer.

Tell us how to improve this page.

People are getting interviews through

based on 1 Sahyadri Industry interview
Recruitment Consultant
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

GAO Tek Interview Questions
4.5
 • 101 Interviews
TransUnion Interview Questions
4.0
 • 87 Interviews
BCD Travel Interview Questions
4.4
 • 84 Interviews
ABCD Interview Questions
3.9
 • 80 Interviews
View all
Electrical Engineer
4 salaries
unlock blur

₹3.2 L/yr - ₹4 L/yr

Sales Executive
4 salaries
unlock blur

₹3 L/yr - ₹4.4 L/yr

HR Assistant
4 salaries
unlock blur

₹3 L/yr - ₹3.2 L/yr

Quality Assurance Engineer
3 salaries
unlock blur

₹3.5 L/yr - ₹5.5 L/yr

Explore more salaries
Compare Sahyadri Industry with

Reliance Communications

4.0
Compare

GAO Tek

4.5
Compare

Tata Teleservices

4.1
Compare

Henry Harvin Education

3.7
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview