Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Rieter Team. If you also belong to the team, you can get access from here

Rieter Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Rieter Machine Shop Engineer Interview Questions and Answers

Updated 3 Oct 2024

Rieter Machine Shop Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is tolerances
  • Ans. 

    Tolerances refer to the allowable deviation from a specified dimension in manufacturing processes.

    • Tolerances ensure that parts fit together properly and function as intended

    • Tolerances can be specified as plus or minus a certain amount from the nominal dimension

    • Examples of tolerances include +/- 0.005 inches for a machined part or +/- 1 degree for an angle measurement

  • Answered by AI
  • Q2. Vernier least count

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Refrigeration cycle ?
  • Ans. 

    Refrigeration cycle is a thermodynamic cycle used in refrigerators and air conditioning systems to transfer heat from a low temperature reservoir to a high temperature reservoir.

    • Consists of four main components: compressor, condenser, expansion valve, and evaporator

    • Refrigerant is compressed in the compressor, then condensed in the condenser, expanded in the expansion valve, and evaporated in the evaporator

    • Heat is absor...

  • Answered by AI
  • Q2. Theory on refrigeration
  • Ans. 

    Refrigeration theory involves the transfer of heat from a low temperature region to a high temperature region using a refrigerant.

    • Refrigeration is based on the principles of thermodynamics, specifically the second law which states that heat naturally flows from a higher temperature to a lower temperature.

    • The refrigeration cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.

    • The...

  • Answered by AI
  • Q3. Compressor clearances
Round 3 - HR 

(1 Question)

  • Q1. Why u want to join Kirloskar

I applied via Company Website and was interviewed in Feb 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Based upon experience the question is different from each other.
Round 3 - One-on-one 

(1 Question)

  • Q1. Background and experience related questions
Round 4 - One-on-one 

(1 Question)

  • Q1. Technical Background and field related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - I had shared all my experience and knowledge of how I accomplished my work.

I applied via Naukri.com and was interviewed in Jul 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 
Round 3 - One-on-one 
Round 4 - HR 

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, most of the Questions based on past experience
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About your past experience
Round 3 - HR 

(1 Question)

  • Q1. About your past salary

I applied via Company Website and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Regarding about Assembly knowledge
  • Q2. Personal round from HR

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be updated and we'll known from technical.
Round 1 - Technical 

(1 Question)

  • Q1. Basic electric questions and PLC programming
Round 2 - Technical 

(1 Question)

  • Q1. Based on your project

Interview Preparation Tips

Interview preparation tips for other job seekers - More question will be on your project for experience people

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me something about your self??
  • Q2. What is your daily work management???
Round 3 - HR 

(1 Question)

  • Q1. Why are you want to change company??

Interview Preparation Tips

Interview preparation tips for other job seekers - If you have expain DWM properly and Position in organization chart then your selection is confirm.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Sep 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is a resistor?
  • Ans. 

    A resistor is an electronic component that resists the flow of electrical current.

    • Resistors are used to control the amount of current flowing in a circuit.

    • They are measured in ohms (Ω) and have color-coded bands to indicate their resistance value.

    • Resistors dissipate energy in the form of heat when current flows through them.

    • Common types of resistors include carbon film, metal film, and wirewound resistors.

  • Answered by AI
  • Q2. What is a transistor?
  • Ans. 

    A transistor is a semiconductor device used to amplify or switch electronic signals.

    • Transistors are fundamental building blocks of modern electronic devices.

    • They can amplify electrical signals, control the flow of current, and act as switches.

    • Common types of transistors include bipolar junction transistors (BJTs) and field-effect transistors (FETs).

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is pressure vessel
  • Ans. 

    A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.

    • Pressure vessels are used in various industries such as oil and gas, chemical, pharmaceutical, and food processing.

    • They are designed to withstand high pressures and are typically cylindrical or spherical in shape.

    • Examples include boilers, storage tanks, and compressed air tanks.

  • Answered by AI
  • Q2. How to design shell
  • Ans. 

    Designing a shell involves considering factors like material, shape, size, and functionality.

    • Consider the material of the shell - metal, plastic, or composite

    • Determine the shape of the shell based on the intended use - cylindrical, spherical, conical, etc.

    • Decide on the size of the shell to accommodate the contents it will hold

    • Design the shell with the necessary functionality in mind - openings, closures, ventilation, e

  • Answered by AI

Skills evaluated in this interview

Rieter Interview FAQs

How many rounds are there in Rieter Machine Shop Engineer interview?
Rieter interview process usually has 1 rounds. The most common rounds in the Rieter interview process are Technical.
What are the top questions asked in Rieter Machine Shop Engineer interview?

Some of the top questions asked at the Rieter Machine Shop Engineer interview -

  1. What is toleran...read more
  2. Vernier least co...read more

Tell us how to improve this page.

Rieter Machine Shop Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 254 Interviews
Forbes Marshall Interview Questions
4.1
 • 42 Interviews
Skipper Interview Questions
3.7
 • 38 Interviews
Ingersoll Rand Interview Questions
3.9
 • 28 Interviews
Sulzer Interview Questions
3.8
 • 27 Interviews
JNS Instruments Interview Questions
3.8
 • 27 Interviews
View all

Rieter Machine Shop Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

3.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Senior Engineer
82 salaries
unlock blur

₹4.9 L/yr - ₹12 L/yr

Assistant Manager
74 salaries
unlock blur

₹7.2 L/yr - ₹17.5 L/yr

Junior Engineer
64 salaries
unlock blur

₹2 L/yr - ₹4.8 L/yr

Engineer
58 salaries
unlock blur

₹2.8 L/yr - ₹7.2 L/yr

Production Engineer
30 salaries
unlock blur

₹2.4 L/yr - ₹6.5 L/yr

Explore more salaries
Compare Rieter with

Thermax Limited

4.1
Compare

Kirloskar Oil Engines

4.2
Compare

Lakshmi Machine Works

3.9
Compare

Skipper

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview