Add office photos
Filter interviews by
Reid & Taylor Production Supervisor Interview Questions and Answers
Reid & Taylor Production Supervisor Interview Experiences
1 interview found
(2 Questions)
- Q1. What is weaving? Ans - interlacement of two series of warp threads and two series of weft threads according to design.
- Ans.
Weaving is the interlacement of warp and weft threads to create a fabric according to a specific design.
Warp threads are the vertical threads that are held taut on a loom.
Weft threads are the horizontal threads that are woven over and under the warp threads.
The design of the fabric is created by the pattern of interlacement between the warp and weft threads.
Examples of woven fabrics include cotton, silk, and wool.
Weavi...
- Q2. Main defference between dobby and jacquard? Ans- Dobby lift heald shaft and jacquard lift individual ends
- Ans.
Dobby lift heald shaft and jacquard lift individual ends.
Dobby is used for simple patterns while Jacquard is used for complex patterns.
Dobby can handle up to 40 heald frames while Jacquard can handle thousands of individual ends.
Jacquard looms are more expensive than Dobby looms.
Interview questions from similar companies
Production Supervisor Interview Questions & Answers
Delta Electronics
Tamilarasan MK
posted on 29 Aug 2024
Selected
I applied via Company Website and was interviewed in Jul 2024. There were 5 interview rounds.
I am silent person, my work is not for bad
(2 Questions)
- Q1. Your one day target success work in me, then you or write work bad work environment
- Q2. No testing with me
Team work this best working
(2 Questions)
- Q1. Daily next day working details shearing
- Q2. This day is best day
(2 Questions)
- Q1. Friendly person
- Q2. Gadi for all works
Interview Preparation Tips
I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.
(2 Questions)
- Q1. HR and technical and coding test
- Q2. Introduction and technical
Production Supervisor Interview Questions & Answers
Hero Motors Company
Samardi Thammayya
posted on 4 Feb 2022
(1 Question)
- Q1. Tell me about yourself.
Production Supervisor Interview Questions & Answers
Western Refrigeration
Anonymous
posted on 31 Mar 2022
I applied via campus placement at JP Institute of Hotel Management and Catering Technology, Meerut and was interviewed before Mar 2021. There were 2 interview rounds.
Work
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is the process for installing a fan for plant operations?
- Ans.
The process for installing a fan for plant operations involves planning, preparation, installation, and testing.
Plan the location of the fan for optimal air circulation
Prepare the necessary tools and equipment for installation
Install the fan according to manufacturer's instructions
Test the fan to ensure proper functioning
Ensure proper maintenance and regular checks for optimal performance
- Q2. What is the heat consumption required for manufacturing 1 metric ton of cement?
- Ans.
The heat consumption required for manufacturing 1 metric ton of cement varies depending on the type of cement and production process.
Heat consumption can range from 3.6 - 6.0 GJ per metric ton of cement produced.
Factors such as the type of kiln used, fuel type, and energy efficiency measures can impact heat consumption.
For example, dry process cement production typically requires less heat compared to wet process produ
(2 Questions)
- Q1. What are your daily job responsibilities?
- Ans.
Daily job responsibilities include overseeing production processes, managing staff, ensuring quality control, and meeting production targets.
Overseeing production processes to ensure efficiency and quality
Managing staff, including scheduling, training, and performance evaluations
Ensuring quality control measures are in place and followed
Meeting production targets and deadlines
Collaborating with other departments to opt
- Q2. What is the process for balancing raw materials in production?
- Ans.
Balancing raw materials in production involves accurately measuring and adjusting the quantities of each material to ensure optimal production output.
Calculate the required quantities of each raw material based on the production schedule
Monitor the inventory levels of each raw material to avoid shortages or excess
Adjust the amounts of raw materials used in production based on quality control standards
Utilize software s...
Interview Preparation Tips
- Plant Operations
Selected
(6 Questions)
- Q1. Production Engineer quality engineer AutoCAD designing
- Q2. Quality engineer AutoCAD designing
- Q3. Production Engineer
- Q4. Quality engineer
- Q5. AutoCAD designing
- Q6. Please request your sir interview
- Ans.
🙏🙏 please check my resume sir
Interview Preparation Tips
Selected
I was interviewed in Jan 2024.
(5 Questions)
- Q1. Want to prepare about the production related questions
- Q2. How we can calculate the OEE
- Ans.
OEE can be calculated by multiplying Availability, Performance, and Quality.
Calculate Availability by dividing Operating Time by Planned Production Time.
Calculate Performance by dividing Actual Production by Maximum Production.
Calculate Quality by dividing Good Count by Total Count.
Multiply Availability, Performance, and Quality to get OEE.
Example: OEE = Availability x Performance x Quality
- Q3. What is the 6 sigma
- Ans.
6 Sigma is a data-driven methodology for improving processes by reducing defects and variations.
6 Sigma aims to achieve near perfection in the products or services delivered by a company.
It focuses on identifying and eliminating causes of defects and minimizing variability in manufacturing and business processes.
6 Sigma uses statistical tools and techniques to measure and analyze process performance.
The goal of 6 Sigma...
- Q4. What is the TPM
- Ans.
TPM stands for Total Productive Maintenance, a proactive approach to maintenance that aims to maximize equipment effectiveness.
TPM focuses on preventing equipment breakdowns through regular maintenance and employee involvement
It involves setting up autonomous maintenance teams to take care of routine tasks
TPM also includes planned maintenance, quality maintenance, and focused improvement projects
Example: Implementing T...
- Q5. What is the CP Cpl
- Ans.
CP Cpl stands for Cost Per Completed Lead, a metric used in marketing to measure the cost of generating a lead that has been successfully completed.
CP Cpl is calculated by dividing the total cost of generating leads by the number of completed leads.
It helps in determining the efficiency and effectiveness of lead generation campaigns.
For example, if a marketing campaign costs $1000 and generates 50 completed leads, the
Skills evaluated in this interview
I applied via LinkedIn
Production engineer for cnc programming and Drawing knowledge
Selected
I applied via Walk-in and was interviewed in May 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Distillation Type?
- Ans.
Distillation is a process used to separate components of a liquid mixture based on differences in boiling points.
Distillation can be classified into simple distillation, fractional distillation, and vacuum distillation.
Simple distillation is used to separate components with a large difference in boiling points.
Fractional distillation is used when the boiling points of the components are closer together.
Vacuum distillat...
- Q2. Vaccum & Plane Distillation
(1 Question)
- Q1. Information about my household members?
Reid & Taylor Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Production Engineer Interview Questions
- Production Manager Interview Questions
- Production Officer Interview Questions
- Executive Production Interview Questions
- Production Interview Questions
- Senior Production Engineer Interview Questions
- Production Chemist Interview Questions
- Production Operator Interview Questions
- Show more
Production Supervisor Interview Questions from Similar Companies
|
Assistant Manager
15
salaries
|  ₹3 L/yr - ₹8.6 L/yr |
|
Senior Officer
10
salaries
| ₹3 L/yr - ₹6.2 L/yr |
|
Officer
6
salaries
| ₹2 L/yr - ₹5 L/yr |
|
Deputy Manager
4
salaries
| ₹4 L/yr - ₹9 L/yr |
|
General Manager
4
salaries
| ₹22 L/yr - ₹22 L/yr |
Raymond Lifestyle Limited
Siyaram Silk Mills
Arvind Group
Grasim Industries
Calculate your in-hand salary
- Home >
- Interviews >
- Reid & Taylor Interview Questions >
- Reid & Taylor Production Supervisor Interview Questions
