Upload Button Icon Add office photos

Filter interviews by

Rakon Utility Maintenance Technician Interview Questions and Answers

Updated 30 May 2024

Rakon Utility Maintenance Technician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Electrical and Electronics realated questions.
  • Q2. What's is ohms law ?
  • Ans. 

    Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, and inversely proportional to the resistance of the conductor.

    • Ohm's law is expressed as V = I * R, where V is voltage, I is current, and R is resistance.

    • It helps in calculating the relationship between voltage, current, and resistance in an electrical circuit.

    • For example, if a circuit has a voltage of 12 vol...

  • Answered by AI
  • Q3. What is transistor?
  • Ans. 

    A transistor is a semiconductor device used to amplify or switch electronic signals and electrical power.

    • Transistors are fundamental building blocks of modern electronic devices.

    • They can be used as amplifiers, switches, or signal modulators.

    • Transistors have three terminals: emitter, base, and collector.

    • Common types of transistors include bipolar junction transistors (BJTs) and field-effect transistors (FETs).

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Rakon Utility Maintenance Technician interview:
  • Technical Skills
  • Technician Activities
Interview preparation tips for other job seekers - Strong with technical skills.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Sep 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. FPY and UPH achievement zero rejection regarding
  • Q2. HMI Penal wireing conection sarvo motor controller.
  • Q3. Solonaid valve conection and air supply.
  • Q4. Product safety.
Round 3 - One-on-one 

(1 Question)

  • Q1. Parsonal details
Round 4 - One-on-one 

(4 Questions)

  • Q1. My parsonal details
  • Q2. Problem solving comunication skills
  • Q3. Kaizen and RCA summary and PPT report.
  • Q4. Machine maintenance Robot teaching

Interview Preparation Tips

Interview preparation tips for other job seekers - Lithium ion battery manufacturing industry
HMI Penal wireing conection sarvo motor controller for PLC control.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in

Round 1 - HR 

(3 Questions)

  • Q1. Shut down prosess
  • Ans. 

    Shutting down a process involves terminating a program or application running on a computer system.

    • Use task manager or command line to end the process

    • Ensure all unsaved work is saved before shutting down

    • Consider any dependencies or impact on other processes

  • Answered by AI
  • Q2. Breaker and transform se aata hai
  • Q3. Shut downprosess

Interview Preparation Tips

Interview preparation tips for other job seekers - Aacha hai

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. What is your qualification
  • Ans. 

    I have a Bachelor's degree in Electrical Engineering and a certification in Electronics.

    • Bachelor's degree in Electrical Engineering

    • Certification in Electronics

  • Answered by AI
  • Q2. How many years experience do u have
  • Ans. 

    I have 5 years of experience working as a technician in various industries.

    • 5 years of experience as a technician

    • Worked in various industries

    • Hands-on experience with troubleshooting and maintenance

    • Familiar with different types of equipment and tools

  • Answered by AI
  • Q3. Where you from?
  • Ans. 

    I am from a small town in the Midwest called Springfield.

    • I grew up in a close-knit community surrounded by farmland.

    • The town has a population of around 10,000 people.

    • Springfield is known for its annual corn festival.

    • It is located about an hour away from the nearest big city.

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Which companions do you work
  • Ans. 

    I work with a team of dedicated and skilled technicians who are always ready to assist.

    • Collaborate with other technicians to troubleshoot and solve technical issues

    • Communicate effectively with team members to ensure smooth workflow

    • Support and assist colleagues in completing tasks efficiently

  • Answered by AI
  • Q2. What is your salary expectation
  • Ans. 

    My salary expectation is based on my experience, qualifications, and the industry standard.

    • Consider my level of experience and qualifications

    • Research industry standards for similar positions

    • Be prepared to negotiate based on benefits and perks offered

  • Answered by AI
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. How was your last Experience in previous/current company
  • Q2. Expecting salary and why?
Round 3 - Technical 

(1 Question)

  • Q1. Civil R&D and tendering related knowledge check

Interview Preparation Tips

Interview preparation tips for other job seekers - be honest and straight forward dont try to pretend you know everything
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Manegement Topic of running our company

Round 2 - Technical 

(4 Questions)

  • Q1. Why Current transformer secondary is open?
  • Ans. 

    Current transformer secondary is open to prevent damage to the transformer and connected equipment.

    • An open secondary circuit prevents excessive current flow and protects the transformer from damage.

    • It allows for safe measurement and monitoring of current without risk of short circuits.

    • An open secondary also prevents damage to connected equipment by isolating it from high currents.

    • In case of a fault or overload, an open...

  • Answered by AI
  • Q2. What is different between CT and PT?
  • Ans. 

    CT and PT are both electrical devices used in power systems, but they have different functions and applications.

    • CT stands for Current Transformer, while PT stands for Potential Transformer.

    • CTs are used to measure and transform high currents into manageable levels for instruments and protective relays.

    • PTs are used to measure and transform high voltages into low voltages for instruments and protective relays.

    • CTs are typi...

  • Answered by AI
  • Q3. Draw the single line diagram for HY to LT Panel diagram?
  • Ans. 

    The single line diagram for HY to LT Panel diagram is a visual representation of the electrical connections and components in the system.

    • The single line diagram shows the flow of electrical power from the HY (High Voltage) side to the LT (Low Tension) side.

    • It includes the main components such as transformers, circuit breakers, switches, and control devices.

    • The diagram also indicates the interconnections between differe...

  • Answered by AI
  • Q4. How many circuit Breakers used in Electrical system?
  • Ans. 

    The number of circuit breakers used in an electrical system varies depending on the size and complexity of the system.

    • The number of circuit breakers used in an electrical system depends on factors such as the size of the system, the number of circuits, and the specific requirements of the building or facility.

    • Residential electrical systems typically have a main circuit breaker at the electrical panel, along with indivi...

  • Answered by AI
Round 3 - Technical 

(2 Questions)

  • Q1. How to manage in power failure situation?
  • Ans. 

    In a power failure situation, effective management involves ensuring safety, communication, and contingency planning.

    • Ensure the safety of employees and customers by providing emergency lighting and clear evacuation procedures.

    • Maintain open lines of communication with staff, customers, and relevant authorities to provide updates and coordinate actions.

    • Implement contingency plans such as backup power sources, alternative...

  • Answered by AI
  • Q2. What's the B check in generator?
  • Ans. 

    B check in a generator refers to a comprehensive inspection and maintenance procedure to ensure its proper functioning.

    • B check involves a thorough examination of the generator's components, including the engine, fuel system, cooling system, electrical system, and control panel.

    • It includes tasks such as checking for leaks, inspecting belts and hoses, testing the battery, cleaning or replacing filters, and verifying prop...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Business Targets
  • Q2. New vertical business

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice company to work with
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected
Round 1 - One-on-one 

(1 Question)

  • Q1. Past project details
  • Ans. 

    Led a team in implementing a new customer relationship management system for a retail company.

    • Managed project timeline and budget effectively

    • Collaborated with cross-functional teams to gather requirements

    • Provided training and support to end users

    • Successfully launched the system with minimal disruptions

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Apr 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Coding Test 

Typically programming chellenge that help technical recruiter test programming skills and competencies of a developer or programmr

Round 3 - Aptitude Test 

An aptitude is a component of a competence to do a certain kind of work at a certain level outstanding aptitude can be considered,, talent

Round 4 - Group Discussion 

China and Taiwan crisis

Interview Preparation Tips

Interview preparation tips for other job seekers - Cerris
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Not Selected

I applied via Job Portal and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Explain about sensor
  • Ans. 

    A sensor is a device that detects and responds to some type of input from the physical environment.

    • Sensors can detect various types of inputs such as light, temperature, pressure, motion, etc.

    • They convert the detected input into a signal that can be measured or used for control purposes.

    • Examples of sensors include temperature sensors in HVAC systems, motion sensors in security systems, and proximity sensors in smartpho

  • Answered by AI
  • Q2. How to maintenance machines?
  • Ans. 

    Maintenance of machines involves regular inspections, cleaning, lubrication, and repair to ensure optimal performance and longevity.

    • Perform regular inspections to identify any signs of wear or damage

    • Clean machines regularly to prevent buildup of dirt and debris

    • Lubricate moving parts to reduce friction and wear

    • Replace worn out parts as needed to prevent breakdowns

    • Keep detailed maintenance records to track repairs and sc...

  • Answered by AI

Rakon Interview FAQs

How many rounds are there in Rakon Utility Maintenance Technician interview?
Rakon interview process usually has 1 rounds. The most common rounds in the Rakon interview process are Technical.
What are the top questions asked in Rakon Utility Maintenance Technician interview?

Some of the top questions asked at the Rakon Utility Maintenance Technician interview -

  1. What's is ohms la...read more
  2. What is transist...read more
  3. Electrical and Electronics realated questio...read more

Tell us how to improve this page.

Rakon Utility Maintenance Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Rakon Utility Maintenance Technician Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

3.0

Skill development

2.0

Work-life balance

1.0

Salary

5.0

Job security

1.0

Company culture

1.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Technician
194 salaries
unlock blur

₹1.2 L/yr - ₹3 L/yr

Senior Technician
89 salaries
unlock blur

₹2 L/yr - ₹3.7 L/yr

Trainee Technician
35 salaries
unlock blur

₹1.4 L/yr - ₹2.5 L/yr

Coordinator
30 salaries
unlock blur

₹2 L/yr - ₹5 L/yr

Lab Technician
21 salaries
unlock blur

₹2 L/yr - ₹3.2 L/yr

Explore more salaries
Compare Rakon with

Mitsubishi Electric India

4.2
Compare

Delta Electronics

4.0
Compare

JBS Enterprises

3.2
Compare

Sunwoda Electronic India Pvt Ltd

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview