Add office photos
Filter interviews by
R.D. Plast Service Engineer Interview Questions, Process, and Tips
R.D. Plast Service Engineer Interview Experiences
1 interview found
I applied via Campus Placement and was interviewed in Apr 2021. There was 1 interview round.
Interview Questionnaire
6 Questions
- Q1. 1.Tell me about your self?
- Ans. My name is Jayesh Arjun Jadhav I am belong to shahada I did my qualification in BE in electrical engineering
- Q2. 2.What is the generation voltage in India?
- Ans.
The generation voltage in India varies depending on the region and the type of power plant.
The generation voltage for thermal power plants is typically 11 kV or 33 kV
Hydroelectric power plants generate electricity at 11 kV or 22 kV
Renewable energy sources like solar and wind generate electricity at 415 V or 11 kV
The voltage is stepped up to 220 kV or 400 kV for transmission over long distances
The voltage is then steppe...
- Q3. 3.Find the motor current?
- Ans.
Motor current can be calculated using the formula I=P/V
Motor current is the amount of electrical current required to operate a motor
It can be calculated using the formula I=P/V, where P is the power and V is the voltage
The unit of motor current is amperes (A)
Motor current varies depending on the load on the motor
Motor current can be measured using a clamp meter or a multimeter
- Q4. 4.Transmission line,Distribution line,Feeder,Service line
- Q5. 5.What is transformer?
- Ans.
A transformer is an electrical device that transfers electrical energy from one circuit to another through electromagnetic induction.
Transformers are used to increase or decrease the voltage in an electrical circuit.
They consist of two coils of wire, called the primary and secondary coils, wrapped around a magnetic core.
When an alternating current flows through the primary coil, it creates a magnetic field that induces...
- Q6. 6.What is alternator and generator?
- Ans.
Alternator and generator are devices that convert mechanical energy into electrical energy.
Alternator is a type of generator that produces alternating current (AC) by using a rotating magnetic field and stationary coils.
Generator is a device that converts mechanical energy into electrical energy by using electromagnetic induction.
Both alternator and generator are commonly used in power generation, automotive industry, ...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I applied via Naukri.com and was interviewed in Feb 2024. There were 3 interview rounds.
(2 Questions)
- Q1. What is the salary date??
- Q2. Work balance life employment??
(2 Questions)
- Q1. Group discussion
- Q2. Good how is salary high
Face interview when it will be there??
Interview Preparation Tips
Service Engineer Interview Questions & Answers
V.S.T Tillers Tractors
Anonymous
posted on 6 Jul 2022
I applied via Recruitment Consulltant and was interviewed before Jul 2021. There were 2 interview rounds.
(3 Questions)
- Q1. In Technical interview questions asked by Senior Manager and National Head engine related and on the behalf of previous experience.
- Q2. Engine smoke type, Engine type, difference between two stock and stock engines and diesel and petrol engine,
- Ans.
Engine smoke type, engine type, difference between stock and stock engines, and diesel and petrol engines.
Engine smoke types include black, white, and blue smoke, each indicating different issues with the engine.
Engine types can be categorized as stock engines or modified engines, with modified engines typically having higher performance.
Diesel engines use compression ignition, while petrol engines use spark ignition.
S...
- Q3. Gear types and it's uses. Differential , clutch types etc
- Ans.
Different gear types like differential and clutch have specific uses in various mechanical systems.
Differential gear allows wheels to rotate at different speeds, useful in vehicles going around corners
Clutch types include mechanical, hydraulic, and electromagnetic, used for engaging and disengaging power transmission
Other gear types include spur, helical, bevel, and worm gears, each with unique applications
Interview Preparation Tips
Tyre testing in market and branches
(2 Questions)
- Q1. Bike service manager
- Q2. What about our family
Service Engineer Interview Questions & Answers
Prama Hikvision India
Anonymous
posted on 25 Jan 2021
I applied via Naukri.com and was interviewed in Aug 2020. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. What's is PNP transistor, how to use multimeter, how to trace a circuit, mount unmount components on pcb etc
- Ans.
PNP transistor is a type of bipolar junction transistor. Multimeter is used to measure voltage, current and resistance. Tracing a circuit involves identifying the path of current flow. Mounting and unmounting components on PCB involves soldering and desoldering.
PNP transistor is a three-layer semiconductor device with emitter, base and collector regions.
Multimeter can be used in different modes such as voltage, current...
- Q2. Computer knowledge must
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Feb 2024. There were 3 interview rounds.
(2 Questions)
- Q1. What is the salary date??
- Q2. Work balance life employment??
(2 Questions)
- Q1. Group discussion
- Q2. Good how is salary high
Face interview when it will be there??
Interview Preparation Tips
Service Engineer Interview Questions & Answers
V.S.T Tillers Tractors
Anonymous
posted on 6 Jul 2022
I applied via Recruitment Consulltant and was interviewed before Jul 2021. There were 2 interview rounds.
(3 Questions)
- Q1. In Technical interview questions asked by Senior Manager and National Head engine related and on the behalf of previous experience.
- Q2. Engine smoke type, Engine type, difference between two stock and stock engines and diesel and petrol engine,
- Ans.
Engine smoke type, engine type, difference between stock and stock engines, and diesel and petrol engines.
Engine smoke types include black, white, and blue smoke, each indicating different issues with the engine.
Engine types can be categorized as stock engines or modified engines, with modified engines typically having higher performance.
Diesel engines use compression ignition, while petrol engines use spark ignition.
S...
- Q3. Gear types and it's uses. Differential , clutch types etc
- Ans.
Different gear types like differential and clutch have specific uses in various mechanical systems.
Differential gear allows wheels to rotate at different speeds, useful in vehicles going around corners
Clutch types include mechanical, hydraulic, and electromagnetic, used for engaging and disengaging power transmission
Other gear types include spur, helical, bevel, and worm gears, each with unique applications
Interview Preparation Tips
Tyre testing in market and branches
(2 Questions)
- Q1. Bike service manager
- Q2. What about our family
Service Engineer Interview Questions & Answers
Prama Hikvision India
Anonymous
posted on 25 Jan 2021
I applied via Naukri.com and was interviewed in Aug 2020. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. What's is PNP transistor, how to use multimeter, how to trace a circuit, mount unmount components on pcb etc
- Ans.
PNP transistor is a type of bipolar junction transistor. Multimeter is used to measure voltage, current and resistance. Tracing a circuit involves identifying the path of current flow. Mounting and unmounting components on PCB involves soldering and desoldering.
PNP transistor is a three-layer semiconductor device with emitter, base and collector regions.
Multimeter can be used in different modes such as voltage, current...
- Q2. Computer knowledge must
Interview Preparation Tips
Customer Service Executive Interview Questions & Answers
Amphenol Interconnect
Anonymous
posted on 29 Jun 2021
I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. In how many languages can you communicate with customer?
- Ans.
I can communicate with customers in multiple languages.
I am fluent in English, Spanish, and French.
I can also communicate in basic Mandarin and German.
I have experience using translation tools for other languages.
Being multilingual helps me cater to a diverse customer base.
- Q2. Are you able to handle customer's queries ?
- Ans.
Yes, I am able to handle customer's queries.
I have experience in handling customer queries in my previous role as a customer service representative.
I am skilled in active listening and empathizing with customers to understand their concerns.
I am knowledgeable about the products/services offered and can provide accurate information to customers.
I am proficient in using customer service software and tools to efficiently ...
Interview Preparation Tips
R.D. Plast Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Service Advisor Interview Questions
- Senior Service Engineer Interview Questions
- Customer Service Executive Interview Questions
- Service Technician Interview Questions
- Customer Service Associate Interview Questions
- Servicenow Developer Interview Questions
- Field Service Engineer Interview Questions
- Service Manager Interview Questions
- Show more
Interview Questions from Similar Companies
R.D. Plast Service Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Manager
6
salaries
|  ₹4.8 L/yr - ₹6 L/yr |
|
Service Engineer
6
salaries
| ₹2 L/yr - ₹3.5 L/yr |
|
Regional Sales Manager
5
salaries
| ₹13.5 L/yr - ₹22 L/yr |
|
Purchase Engineer
4
salaries
| ₹2.4 L/yr - ₹2.6 L/yr |
|
Sales Support Executive
4
salaries
| ₹3.2 L/yr - ₹4.2 L/yr |
Dhoot Transmission
ZF Steering Gear
Amphenol Interconnect
Ag Industries
- Home >
- Interviews >
- R.D. Plast Interview Questions >
- R.D. Plast Service Engineer Interview Questions
