Filter interviews by
I applied via Recruitment Consultant and was interviewed before Feb 2020. There were 4 interview rounds.
Internal and external standards are used in quality control to ensure accurate and reliable measurements.
Internal standard is a substance that is added to the sample being analyzed, which is used as a reference to measure the analyte of interest.
External standard is a separate sample with a known concentration of the analyte, which is used to calibrate the instrument and validate the accuracy of the measurements.
Intern...
To prepare a solution, measure the required amount of solute and dissolve it in the appropriate amount of solvent.
Determine the concentration and volume of the desired solution
Measure the required amount of solute using a balance
Add the solute to a volumetric flask or beaker
Add the appropriate amount of solvent to reach the desired volume
Stir the solution until the solute is completely dissolved
Instruments are calibrated by comparing their readings to a known standard and adjusting them accordingly.
Identify the standard to be used for calibration
Ensure the instrument is clean and free of debris
Record the initial readings of the instrument
Compare the readings to the standard and adjust as necessary
Record the final readings and document the calibration process
Primary standards are highly pure compounds used for calibration, while secondary standards are less pure and used for routine analysis.
Primary standards are used to calibrate instruments and determine the accuracy of measurements.
They are highly pure and stable compounds that can be weighed accurately.
Examples of primary standards include potassium hydrogen phthalate and sodium carbonate.
Secondary standards are used f...
I applied via Approached by Company and was interviewed before Jul 2021. There were 2 interview rounds.
I applied via Walk-in and was interviewed before Oct 2020. There were 3 interview rounds.
I applied via Referral and was interviewed before Jun 2021. There were 2 interview rounds.
PI Industries interview questions for popular designations
I applied via Referral and was interviewed before Jun 2021. There were 2 interview rounds.
Get interview-ready with Top PI Industries Interview Questions
I applied via Recruitment Consultant and was interviewed in Jun 2020. There were 3 interview rounds.
I applied via Campus Placement and was interviewed in Jun 2019. There were 5 interview rounds.
Herbicide is a type of pesticide used to kill unwanted plants.
Herbicides are chemicals that are used to control or kill unwanted plants.
They are commonly used in agriculture to prevent weeds from competing with crops.
Some herbicides are selective, meaning they only target specific types of plants, while others are non-selective and will kill any plant they come into contact with.
Examples of herbicides include glyphosat...
PI Industries is a leading agrochemical company in India that manufactures and supplies a wide range of products.
Nominee Gold
Fame Granules
Fame Insecticide
Ankur
Fame 1% Dust
Fame 2.5% Dust
Fame 5% Dust
Fame 25% WG
Fame 40% SC
Fame 50% SP
Fame 80% WP
Fame 20% EC
Fame 75% WP
Fame 50% WG
Fame 20% WG
Fame 25% SC
Fame 10% EC
Fame 20% SP
Fame 40% WG
Fame 50% EC
Fame 60% WP
Fame 70% WP
Fame 80% WDG
Fame 90% WDG
Fame 95% TC
Fame 97% TC
Fame 98% TC
Fam
Bernoulli's theorem explains the relationship between fluid speed and pressure.
Bernoulli's theorem states that as the speed of a fluid increases, its pressure decreases.
It is important in industries such as aviation, where it is used to design wings and airfoils.
It is also used in the design of pipelines and pumps.
Limitations include the assumption of incompressible and non-viscous fluids, and the neglect of friction a...
Pump is used to transfer fluids from one place to another while compressor is used to compress gases.
Pump is used to move fluids like water, oil, etc. from one place to another.
Compressor is used to compress gases like air, refrigerant, etc.
Pumps are used in industries, households, and agriculture while compressors are used in refrigeration, air conditioning, and gas pipelines.
Pumps have a lower pressure ratio while co...
Closing a shutoff valve while the pump is running dry can cause damage to the pump and other components.
The pump will continue to run but without any fluid to circulate, causing it to overheat and potentially seize.
The lack of fluid can also cause damage to the impeller and other internal components.
The pressure in the system can also increase, leading to potential leaks or bursts in the pipeline.
It is important to ens...
Closing the shutoff valve while pumping in a centrifugal pump can cause damage to the pump and the piping system.
The pump will continue to generate pressure, leading to a buildup of pressure in the piping system.
This can cause the pump to overheat and potentially damage the impeller.
The piping system may also experience damage due to the increased pressure.
It is important to ensure that the shutoff valve is only closed...
Connecting pumps in series increases head while connecting in parallel increases flow rate.
Connecting pumps in series increases the total head of the system while connecting in parallel increases the total flow rate.
In series connection, the discharge remains the same while the head increases.
In parallel connection, the head remains the same while the discharge increases.
Series connection is used when high head is requ...
Dimensions of power, energy, force and acceleration.
Power is measured in watts (W) and is the rate at which work is done.
Energy is measured in joules (J) and is the capacity to do work.
Force is measured in newtons (N) and is the push or pull on an object.
Acceleration is measured in meters per second squared (m/s^2) and is the rate of change of velocity.
Valves are mechanical devices used to control the flow of fluids or gases.
Valves are used in various industries such as oil and gas, water treatment, and chemical processing.
They can be classified into different types such as gate valves, ball valves, and butterfly valves.
Valves can be operated manually or automatically using actuators.
They play a crucial role in maintaining the safety and efficiency of industrial proc...
Types of what? Please provide more context.
Please provide more context for the question.
Without context, it is impossible to provide a meaningful answer.
Types can refer to many different things, such as types of engineering, types of materials, types of software, etc.
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 2 interview rounds.
posted on 20 Apr 2021
I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 3 interview rounds.
I applied via Recruitment Consultant and was interviewed before Oct 2019. There were 3 interview rounds.
Fluorinating agent, butyl lithium handling, and reducing agents are important in research science.
The cheapest fluorinating agent is often hydrogen fluoride.
Butyl lithium must be handled with extreme care due to its reactivity and flammability.
Flow meters can be used to accurately control the addition of butyl lithium.
Common reducing agents used in research science include sodium borohydride and lithium aluminum hydrid
Some of the top questions asked at the PI Industries interview -
The duration of PI Industries interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 90 interviews
Interview experience
based on 1.4k reviews
Rating in categories
Production Supervisor
703
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive
254
salaries
| ₹0 L/yr - ₹0 L/yr |
Supervisor
241
salaries
| ₹0 L/yr - ₹0 L/yr |
Research Scientist
223
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
148
salaries
| ₹0 L/yr - ₹0 L/yr |
Bayer Crop Science Vegetable Seeds
UPL
Syngenta
Coromandel International