NMDC Limited
30+ Tiger Corporation Interview Questions and Answers
Q1. If the transfer function of a given system is given how can we say that a system is stable by drawing Bode plot ?
Q2. How to determine stability of a system using Routh Hurwitz criterion, Bode plot and Nyquist plot ?
Q3. What are the necessary conditions for the stability of a system using Routh Hurwitz criterion ?
Q4. What are common risks at NMDC? And how to face?
Common risks at NMDC include market volatility, regulatory changes, and operational risks. These can be faced through risk management strategies.
Market volatility can be managed through diversification of products and markets.
Regulatory changes can be monitored and responded to through compliance measures.
Operational risks can be mitigated through proper training and safety protocols.
Financial risks can be managed through effective financial planning and management.
Environmen...read more
Q5. How the change in the positions of poles and zeros affect the stability ?
Q6. What is the significance of inverse-time in protection scheme?
Inverse-time is a protection scheme used in electrical systems to provide selective coordination and faster fault detection.
Inverse-time protection is based on the principle that the time taken for a protective device to operate is inversely proportional to the magnitude of the fault current.
It allows for selective coordination, where the protective devices closest to the fault operate faster than those further away.
Inverse-time curves are used to determine the operating time...read more
Q7. What is armature reaction?
Armature reaction is the effect of magnetic field produced by armature current on the main magnetic field of a DC machine.
It is caused by the interaction of armature current and main magnetic field.
It distorts the main magnetic field and shifts the neutral plane.
It affects the commutation process and can cause sparking.
Compensating windings are used to counteract armature reaction.
It is more pronounced in DC machines with high armature current.
Armature reaction can be minimiz...read more
Q8. Can we call an induction motor a transformer?
No, an induction motor cannot be called a transformer.
An induction motor converts electrical energy into mechanical energy, while a transformer only changes the voltage level of an AC power supply.
A transformer has two windings, while an induction motor has a rotor and a stator.
Transformers are used to step up or step down voltage levels, while induction motors are used to drive mechanical loads.
Induction motors have a rotating magnetic field, while transformers do not.
Exampl...read more
Q9. What is meaning of compressive strength of the concrete ?
Q10. Give some instances in which you anticipated problems
Anticipated problems in various situations
During a project, I anticipated potential delays due to a team member's absence and created a contingency plan
In customer service, I anticipated a high volume of calls during a holiday weekend and scheduled extra staff
In event planning, I anticipated bad weather and arranged for indoor backup options
In financial analysis, I anticipated a decrease in revenue and created a plan to cut costs
In software development, I anticipated bugs and...read more
Q11. Do we need wires to transmit electricity (power) ?
Q12. Was electrical engineering your first choice?
Yes, it was my first choice.
I have always been interested in how things work and how to improve them.
I excelled in math and science in high school, which led me to pursue electrical engineering.
I have found the field to be challenging and rewarding, and I am passionate about it.
I have had the opportunity to work on exciting projects, such as designing a new power grid system for a city.
Overall, I am very happy with my choice to pursue electrical engineering.
Q13. What is meant by circuit breaker ?
Q14. Tell me something about induction motor
An induction motor is an AC electric motor in which the electric current in the rotor is produced by electromagnetic induction from the magnetic field of the stator winding.
Induction motors are widely used in industrial applications due to their simplicity, reliability, and low cost.
They work on the principle of electromagnetic induction, where a rotating magnetic field is produced in the stator winding, which induces a current in the rotor winding.
The rotor of an induction m...read more
Q15. What are turbo generators,hydro generators?
Turbo generators and hydro generators are types of electrical generators used to convert mechanical energy into electrical energy.
Turbo generators are used in thermal power plants and gas turbine power plants.
Hydro generators are used in hydroelectric power plants.
Turbo generators use steam to rotate the turbine and generate electricity.
Hydro generators use the force of falling water to rotate the turbine and generate electricity.
Both types of generators are commonly used in ...read more
Q16. What are different types of protection schmes?
Q17. Was Electrical Engineering your first choice ?
Q18. What can you contribute to NMDC?
I can contribute my expertise in project management and my ability to work collaboratively with teams to achieve goals.
Expertise in project management
Collaborative team player
Ability to achieve goals
Experience in the industry
Innovative problem solver
Q19. Give brief introduction about power system?
Power system is a network of electrical components used to generate, transmit, and distribute electricity.
Power system is responsible for generating electrical energy from various sources such as coal, natural gas, hydro, wind, and solar.
It includes power plants, transformers, transmission lines, substations, and distribution networks.
Power generation involves converting mechanical energy into electrical energy through generators.
Transmission lines carry high voltage electric...read more
Q20. Practical handling of mine working, ore sorting, drilling and blasting etc.
Practical handling of mine working, ore sorting, drilling and blasting involves knowledge of safety protocols, equipment operation, and efficient techniques.
Ensure safety protocols are followed at all times
Operate equipment such as excavators, bulldozers, and drills
Use efficient techniques for ore sorting and blasting
Monitor and maintain equipment to ensure optimal performance
Collaborate with team members to achieve production targets
Q21. Write Maxwell's laws of electromagnetics ?
Maxwell's laws of electromagnetics describe the behavior of electric and magnetic fields.
Maxwell's first law states that the total electric flux through a closed surface is equal to the net charge enclosed by that surface divided by the permittivity of free space.
Maxwell's second law states that the magnetic field lines do not have any sources or sinks, and any magnetic field line that forms a closed loop must pass through a current-carrying wire.
Maxwell's third law states th...read more
Q22. Tell me some theorems you learnt in DSP
Some theorems in DSP are Nyquist-Shannon sampling theorem, Parseval's theorem, and Convolution theorem.
Nyquist-Shannon sampling theorem states that a signal can be perfectly reconstructed if it is sampled at a rate greater than twice its highest frequency component.
Parseval's theorem relates the energy of a signal in the time domain to its energy in the frequency domain.
Convolution theorem states that convolution in the time domain corresponds to multiplication in the frequen...read more
Q23. What are several mineral dressing techniques?
Q24. What are inverse time-current characteristics ?
Q25. What is a mineral and what is an ore?
A mineral is a naturally occurring inorganic solid with a specific chemical composition and crystal structure. An ore is a rock that contains a valuable mineral or metal.
Minerals are formed through geological processes and have a defined chemical composition.
They have a crystalline structure and can be identified by their physical properties.
Ores are rocks that contain economically valuable minerals or metals.
They are mined and processed to extract the valuable materials.
Exam...read more
Q26. What is digital signal processing?
Digital signal processing is the use of mathematical algorithms to manipulate and analyze digital signals.
It involves converting analog signals into digital signals
It can be used in audio and image processing
It is used in various applications such as noise reduction, compression, and filtering
Examples include MP3 audio compression and JPEG image compression
Q27. What is mean by M in M20 ?
M in M20 refers to the mix ratio of concrete, where M stands for mix and 20 represents the compressive strength of concrete in megapascals (MPa).
M20 is a commonly used grade of concrete in construction.
The mix ratio for M20 concrete is 1:1.5:3, which means 1 part cement, 1.5 parts sand, and 3 parts aggregate by volume.
The compressive strength of M20 concrete is expected to be 20 MPa after 28 days of curing.
Different grades of concrete have different mix ratios and compressive...read more
Q28. what is meant by inductor ?
Q29. Draw the phasor diagram of transformer
Phasor diagram of transformer shows the relationship between voltage, current, and phase angle.
The primary and secondary voltage phasors are drawn perpendicular to each other.
The primary and secondary current phasors are also drawn perpendicular to each other.
The phase angle between the primary voltage and current phasors is the same as the phase angle between the secondary voltage and current phasors.
The transformer turns ratio determines the length of the voltage and curren...read more
Q30. What is good customer service?
Good customer service involves meeting customer needs and expectations with a positive attitude and effective communication.
Promptly addressing customer inquiries and concerns
Providing accurate and helpful information
Being courteous and respectful
Going above and beyond to exceed customer expectations
Following up to ensure customer satisfaction
Q31. What is your aim?
Q32. What is Sieving?
Q33. Safety features of Dumpers?
Dumpers have various safety features to prevent accidents and ensure safe operation.
Dumpers have roll-over protection systems (ROPS) to prevent the vehicle from tipping over.
They also have seat belts and enclosed cabins to protect the driver in case of an accident.
Dumpers have warning alarms and lights to alert workers of their movement.
Some dumpers have automatic braking systems to prevent collisions.
Dumpers have emergency stop buttons to immediately stop the vehicle in case...read more
Top HR Questions asked in Tiger Corporation
Interview Process at Tiger Corporation
Top Interview Questions from Similar Companies
Reviews
Interviews
Salaries
Users/Month