Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 2 interview rounds.
Atmospheric pressure is the force per unit area exerted on a surface by the weight of the air above that surface.
Atmospheric pressure decreases with increasing altitude
Standard atmospheric pressure at sea level is around 1013.25 millibars or 29.92 inches of mercury
Atmospheric pressure is measured using barometers
Weight adjustment of a Load cell controller involves calibrating the controller to accurately measure weight.
Calibrate the load cell controller using known weights to ensure accurate measurements.
Adjust the zero balance to account for any offset in the readings.
Perform span adjustment to set the maximum weight range the controller can measure.
Verify the accuracy of the adjustments by testing with different weights.
Repe...
Calibrating AMLC on 15 plant involves ensuring accurate measurements and adjustments for optimal performance.
Ensure all 15 plants are properly set up and functioning correctly before calibration.
Use calibration equipment such as sensors, meters, and software to adjust AMLC settings.
Perform calibration tests on each plant individually to ensure accuracy and consistency.
Document calibration results and make necessary adj...
Qmap is used for quality mapping in software testing.
Qmap helps in identifying areas of improvement in software quality.
It provides a visual representation of quality metrics.
Qmap can be used to track defects and their resolution.
It helps in analyzing the effectiveness of testing strategies.
I applied via Walk-in and was interviewed before Jun 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before Dec 2023. There was 1 interview round.
I appeared for an interview in Mar 2023.
I handle approximately 50-100 emails per day in my current role as a Senior Engineer.
I prioritize emails based on urgency and importance
I respond to emails promptly to ensure efficient communication
I organize emails into folders for easy access and reference
Differential is a mechanical device that allows the wheels of a vehicle to rotate at different speeds.
Differential is commonly found in vehicles with multiple wheels, such as cars and trucks.
It is located in the center of the axle and connects the drive shaft to the wheels.
The main purpose of a differential is to allow the wheels to rotate at different speeds while still receiving power from the engine.
This is importan...
EGR system stands for Exhaust Gas Recirculation system. It is used in internal combustion engines to reduce nitrogen oxide emissions.
EGR system recirculates a portion of exhaust gases back into the engine's intake manifold.
This reduces the combustion temperature and lowers the production of nitrogen oxides.
The recirculated exhaust gases also help in reducing engine knocking and improving fuel efficiency.
EGR systems can...
The I-shift automatic gearbox uses helical gears and spur gears.
I-shift automatic gearbox uses helical gears for the main transmission and spur gears for the auxiliary section
Helical gears provide smoother and quieter operation compared to spur gears
Spur gears are used for the auxiliary section as they are more efficient for high torque applications
Basic aptitude test with time limit
I applied via Naukri.com and was interviewed before Apr 2022. There were 3 interview rounds.
I applied via Referral and was interviewed in Jan 2023. There were 3 interview rounds.
Different bolt grades are used for various applications based on their strength and durability.
Bolt grades are typically indicated by numbers or letters, such as Grade 2, Grade 5, Grade 8, etc.
Higher grade bolts have higher strength and are used in applications where greater load-bearing capacity is required.
Common grades include Grade 2, Grade 5, Grade 8, and stainless steel bolts.
Each grade has specific properties an...
I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.
Press filter is a device used for separating solids from liquids.
It works by applying pressure to the mixture to force the liquid through a filter media while retaining the solids.
It is commonly used in industries such as chemical, pharmaceutical, and food processing.
Examples of press filters include belt filter press, plate and frame filter press, and rotary vacuum-drum filter.
Press filters are efficient and cost-effe...
To maintain pressure in press filter, ensure proper sealing, check for leaks, and adjust feed rate and pressure settings.
Check for proper sealing of the filter plates and gaskets
Inspect for any leaks in the system and repair them promptly
Adjust the feed rate and pressure settings as per the manufacturer's recommendations
Regularly clean and maintain the filter to prevent clogging and pressure drop
Monitor the pressure ga...
The model of hydraulic cylinder in press filter depends on the specific press filter being used.
The model of hydraulic cylinder can vary depending on the size and capacity of the press filter.
Some common models of hydraulic cylinders used in press filters include tie rod cylinders and welded cylinders.
The specific model of hydraulic cylinder used in a press filter can be determined by consulting the manufacturer's spec...
Roller bearings are commonly used in bogie wheels.
Roller bearings are preferred over plain bearings due to their ability to handle heavy loads and reduce friction.
Tapered roller bearings are commonly used in locomotive bogie wheels.
Cylindrical roller bearings are also used in some bogie wheels.
The type of bearing used depends on the specific application and load requirements.
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Executive
146
salaries
| ₹7 L/yr - ₹14 L/yr |
Executive Engineer
54
salaries
| ₹6 L/yr - ₹12.2 L/yr |
Manager
37
salaries
| ₹9.4 L/yr - ₹30 L/yr |
Senior Manager
35
salaries
| ₹15.7 L/yr - ₹40 L/yr |
Deputy Manager
30
salaries
| ₹8 L/yr - ₹24 L/yr |
Coal India
Steel Authority Of India
Oil And Natural Gas Corporation
Bharat Petroleum