Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Navin Fluorine International Management Trainee Interview Questions and Answers

Updated 11 Jun 2024

Navin Fluorine International Management Trainee Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Basics of chemical Engineering and B.tech projects
  • Q2. Questions on three favourite subjects chosen

Interview Preparation Tips

Interview preparation tips for other job seekers - The company's adminstration is not proper and roles and responsibilities are not clearly defined, attrition rate is high and safety in company is poor

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. Heat Exchanger, Distillation, Utilities.
  • Q2. Material Balance distillation column
  • Q3. Cooling tower types
  • Ans. 

    Cooling towers are used to remove heat from a building or industrial process by transferring it to the atmosphere.

    • Cooling towers can be classified into two main types: natural draft and mechanical draft.

    • Natural draft cooling towers use the stack effect to draw air through the tower, while mechanical draft cooling towers use fans to force air through the tower.

    • Examples of cooling tower types include crossflow, counterfl

  • Answered by AI
  • Q4. Heat Exchanger Type
  • Ans. 

    Heat exchangers are devices used to transfer heat between two or more fluids.

    • There are several types of heat exchangers, including shell and tube, plate, and finned tube heat exchangers.

    • Shell and tube heat exchangers are commonly used in industrial applications, while plate heat exchangers are more compact and efficient.

    • Finned tube heat exchangers are often used in HVAC systems to increase heat transfer efficiency.

    • The ...

  • Answered by AI
  • Q5. Line sizing, pump sizing.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Types of pump and application
  • Ans. 

    There are various types of pumps used for different applications, such as centrifugal pumps for water supply and positive displacement pumps for oil and gas industry.

    • Centrifugal pumps are commonly used for water supply, irrigation, and HVAC systems.

    • Positive displacement pumps are used in the oil and gas industry for transferring viscous fluids.

    • Diaphragm pumps are suitable for pumping chemicals and pharmaceuticals.

    • Peris...

  • Answered by AI
  • Q2. Difference between distilation and evaporation
  • Ans. 

    Distillation is a process of separating components in a liquid mixture based on boiling points, while evaporation is a process of converting a liquid into vapor.

    • Distillation involves heating a liquid mixture to separate components based on their boiling points.

    • Evaporation involves converting a liquid into vapor by heating or exposing it to air.

    • Distillation is used in industries to purify liquids like alcohol, while eva...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Why change your previous company

I was interviewed in Mar 2021.

Interview Questionnaire 

1 Question

  • Q1. Question related to basic science conpects, safety , process and equipment operations, reactions, GMP and Documentation.

Interview Preparation Tips

Interview preparation tips for other job seekers - Follow good formal look, and be confident

I applied via Walk-in and was interviewed in Nov 2020. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Full GMP
  • Q2. CGMP
  • Q3. Chemical reaction
  • Q4. Document

Interview Preparation Tips

Interview preparation tips for other job seekers - All

I applied via Recruitment Consultant and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Are you worked on Aspen hysys?
  • Ans. 

    Yes, I have worked on Aspen HYSYS.

    • I have experience using Aspen HYSYS for process simulation and optimization.

    • I have used Aspen HYSYS to design and optimize various chemical processes.

    • I am familiar with the software's capabilities and have used it to model complex systems.

    • I have also used Aspen HYSYS to perform sensitivity analyses and evaluate different scenarios.

    • Overall, my experience with Aspen HYSYS has been valuab

  • Answered by AI
  • Q2. Explain how to design of cooling tower, HE, Reactor, Column , Scrubber ??
  • Q3. Sizing of PSV and vent
  • Ans. 

    Sizing of PSV and vent

    • PSV (Pressure Safety Valve) should be sized based on the maximum possible flow rate and the set pressure of the system

    • Vent should be sized based on the maximum possible flow rate and the back pressure of the system

    • Factors like fluid properties, temperature, and pressure drop should also be considered while sizing PSV and vent

    • Proper sizing of PSV and vent is crucial for ensuring the safety of the s

  • Answered by AI
  • Q4. Draw of P&ID of Scrubber
  • Ans. 

    A P&ID of a scrubber is a diagram that shows the process flow and equipment involved in removing pollutants from industrial exhaust gases.

    • The P&ID should include the inlet and outlet streams, as well as the scrubbing liquid and any necessary pumps or valves.

    • The scrubber itself should be clearly labeled and include details such as the type of scrubbing media used (e.g. water, chemicals) and any associated instrumentatio...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Have to deep knowledge about whatever you write on your resume.

I applied via Referral and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 
Round 2 - One-on-one 

(1 Question)

  • Q1. Types of fire. Basic safety questions. Calculation of cooling tower.
Round 3 - GM ROUND 

(1 Question)

  • Q1. Basic question about previous experience

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are selected for interview preparation of basic question & process in your company.

I applied via Referral and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 
Round 2 - One-on-one 

(1 Question)

  • Q1. Types of fire. Basic safety questions. Calculation of cooling tower.
Round 3 - GM ROUND 

(1 Question)

  • Q1. Basic question about previous experience

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are selected for interview preparation of basic question & process in your company.
Round 1 - Technical 

(2 Questions)

  • Q1. My first technical round was taken telephonic bcoz of covid pandemic.
  • Q2. 1.In previous organisation roles & responsibilities. 2.what is your contribution for previous organisation. 3. About Design knowledge
Round 2 - Technical 

(2 Questions)

  • Q1. Second round completed by face to face interview in Ranjitnagar location.
  • Q2. 1.Distillation column design 2.Heat balance, material balance 3.IPDS,EPDS ,PDS 4.BASIC Chemical engineering concepts.

Interview Preparation Tips

Interview preparation tips for other job seekers - Dear frnds ,GFL is the best organization for carrier step.
Free surrounding for work.
Best organization for carrier.

Executive Interview Questions & Answers

Aarti Industries user image Vijay Shankar Pandey

posted on 19 Sep 2023

Interview experience
5
Excellent
Difficulty level
-
Process Duration
6-8 weeks
Result
Not Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(4 Questions)

  • Q1. Distillation, pervious company experience. Work to permit, SAP, pump, parts of pump. Man ower handling.
  • Q2. Steam ejector vacuum pump.
  • Q3. Barnali principle.
  • Q4. Knowledge about DCS system
Round 3 - HR 

(1 Question)

  • Q1. Basic info about you and your family.

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are in college try to score in gate or college placement. If you are not selected previous both exam then you focus on technical knowledge and interpersonal skill and change time to time company.
Contribute & help others!
anonymous
You can choose to be anonymous

Navin Fluorine International Interview FAQs

How many rounds are there in Navin Fluorine International Management Trainee interview?
Navin Fluorine International interview process usually has 1 rounds. The most common rounds in the Navin Fluorine International interview process are Technical.
What are the top questions asked in Navin Fluorine International Management Trainee interview?

Some of the top questions asked at the Navin Fluorine International Management Trainee interview -

  1. basics of chemical Engineering and B.tech proje...read more
  2. Questions on three favourite subjects cho...read more

Recently Viewed

SALARIES

GE

INTERVIEWS

GE

No Interviews

INTERVIEWS

GE

No Interviews

JOBS

GE

No Jobs

SALARIES

GE

INTERVIEWS

Signalchip Innovations

No Interviews

INTERVIEWS

Oracle Cerner

No Interviews

SALARIES

GE

SALARIES

GE

LIST OF COMPANIES

GE

Overview

Tell us how to improve this page.

Navin Fluorine International Management Trainee Interview Process

based on 1 interview

Interview experience

3
  
Average
View more
Navin Fluorine International Management Trainee Salary
based on 14 salaries
₹16.2 L/yr - ₹20.7 L/yr
147% more than the average Management Trainee Salary in India
View more details

Navin Fluorine International Management Trainee Reviews and Ratings

based on 2 reviews

3.4/5

Rating in categories

4.0

Skill development

5.0

Work-life balance

5.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 2 Reviews and Ratings
Production Officer
177 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Officer
142 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
94 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
91 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Navin Fluorine International with

Vinati Organics

4.0
Compare

Solvay Specialities

4.2
Compare

Gujarat Fluorochemicals

4.0
Compare

SRF

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent