i
Movate
Filter interviews by
I appeared for an interview in Mar 2025, where I was asked the following questions.
I applied via LinkedIn and was interviewed in Feb 2024. There were 2 interview rounds.
Native VLAN is used for untagged traffic, default VLAN is used when no VLAN is specified, DHCP process involves client requesting IP address from server.
Native VLAN is used for untagged traffic on a trunk port
Default VLAN is used when no VLAN is specified, typically VLAN 1
DHCP process involves client sending a DHCP discover message, server offering an IP address, client requesting the offered IP address, and server ack
I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.
What people are saying about Movate
I applied via Naukri.com and was interviewed before Feb 2023. There was 1 interview round.
Packet flow between same network involves communication between devices within the same IP subnet.
Devices communicate directly without needing to go through a router.
Packet headers contain source and destination IP addresses for proper routing.
Switches forward packets based on MAC addresses within the same network.
Firewalls may inspect and filter packets within the same network.
Examples: File sharing between devices on...
Packet flow between different networks involves routing, switching, and encapsulation.
Packet travels from source device to destination device through routers and switches
Routers determine the best path for the packet based on routing tables
Switches forward the packet within the same network based on MAC addresses
Encapsulation involves adding headers and trailers to the packet at each network layer
Example: Packet from a...
A client can get an IP address through DHCP (Dynamic Host Configuration Protocol) or by manually configuring it.
DHCP (Dynamic Host Configuration Protocol) assigns IP addresses automatically to clients on a network
Clients can also manually configure their IP address, subnet mask, gateway, and DNS server
IP addresses can be obtained through IPv4 or IPv6 protocols
Movate interview questions for designations
I applied via Naukri.com and was interviewed in Feb 2022. There were 4 interview rounds.
SIP call flow is the process of establishing, maintaining, and terminating a session initiated by Session Initiation Protocol (SIP).
SIP INVITE message is sent from the caller to the callee
Callee responds with a SIP 100 Trying message
Callee sends a SIP 180 Ringing message to indicate the phone is ringing
Callee sends a SIP 200 OK message to indicate the call is accepted
Media negotiation takes place between the caller and...
Get interview-ready with Top Movate Interview Questions
I applied via Referral and was interviewed before Sep 2022. There were 4 interview rounds.
I applied via Naukri.com and was interviewed in Jun 2021. There were 4 interview rounds.
L3 switch is a switch with routing capabilities while a router is a dedicated device for routing.
L3 switch operates at layer 2 and layer 3 of the OSI model while a router operates only at layer 3.
L3 switch can perform routing functions like a router but also has the ability to switch frames between ports like a switch.
Routers are typically used to connect different networks while L3 switches are used to segment a netwo...
VLAN leakage is when traffic from one VLAN is mistakenly sent to another VLAN.
VLAN tagging should be properly configured to prevent leakage
Access control lists (ACLs) can be used to restrict traffic between VLANs
VLAN pruning can be used to limit the number of VLANs that are propagated throughout the network
Examples of VLAN leakage include a misconfigured switch port or a compromised network device
TCP 3 way handshake is a process of establishing a connection between two devices over a network.
The client sends a SYN packet to the server
The server responds with a SYN-ACK packet
The client sends an ACK packet to the server to confirm the connection
This process is used to ensure reliable communication between devices
I applied via Referral and was interviewed in May 2021. There were 3 interview rounds.
Basics of networking
I applied via Naukri.com and was interviewed in Jun 2021. There were 5 interview rounds.
Questions related to TCP/IP layers, subnet mask, VLAN, ARP, port number, IP and MAC addresses.
Transport layer is needed for reliable communication and error correction.
Subnet mask is used to identify the network and host portions of an IP address.
VLAN is needed for network segmentation and security.
Switches and routers send packets or frames based on destination IP address.
Types of ARP include ARP request and ARP reply...
I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.
The duration of Movate Network Engineer interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 4 interviews
3 Interview rounds
based on 155 reviews
Rating in categories
Senior Engineer
1.5k
salaries
| ₹2.9 L/yr - ₹12 L/yr |
Technical Support Engineer
1.4k
salaries
| ₹1 L/yr - ₹7.6 L/yr |
Network Engineer
1.2k
salaries
| ₹1.8 L/yr - ₹9.5 L/yr |
Engineer
1.1k
salaries
| ₹1.8 L/yr - ₹9 L/yr |
Specialist
321
salaries
| ₹4.5 L/yr - ₹15.4 L/yr |
DXC Technology
Virtusa Consulting Services
CGI Group
Optum Global Solutions