Add office photos
Filter interviews by
Mourya Aquex Electrical Technician Interview Questions, Process, and Tips
Mourya Aquex Electrical Technician Interview Experiences
1 interview found
Anonymous
Selected
I applied via Walk-in and was interviewed before Feb 2023. There was 1 interview round.
(5 Questions)
- Q1. How to works on principal of transformer
- Ans.
A transformer works on the principle of electromagnetic induction to transfer electrical energy between two or more circuits.
Transformers have two coils of wire, known as primary and secondary coils, which are wound around a core typically made of iron or steel.
When an alternating current flows through the primary coil, it creates a changing magnetic field around the coil.
This changing magnetic field induces a voltage ...
- Q2. Types of breakers & working
- Ans.
Types of breakers include circuit breakers, fuse breakers, and earth leakage circuit breakers. They work by interrupting the flow of electricity when a fault is detected.
Circuit breakers: Automatically trip when a fault is detected to interrupt the flow of electricity.
Fuse breakers: Use a fuse to interrupt the flow of electricity when a fault is detected.
Earth leakage circuit breakers: Detect leakage of current to prev...
- Q3. Single line diagram for Dol stater
- Ans.
A single line diagram for a Direct-On-Line (DOL) starter shows the electrical connections and components in a simplified manner.
Includes a power supply, motor, contactor, overload relay, and start/stop push buttons
Power supply connects to the contactor, which controls the flow of electricity to the motor
Overload relay protects the motor from overheating by monitoring current flow
Start/stop push buttons are used to manu
- Q4. How to works on principal of generator
- Ans.
Generators work on the principle of electromagnetic induction to convert mechanical energy into electrical energy.
Generators use a magnetic field and a conductor to create an electric current.
When the conductor moves through the magnetic field, it induces a voltage in the conductor.
This voltage creates an electric current that can be used to power electrical devices.
Examples of generators include wind turbines, hydroel
- Q5. Induction motors
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
john pradhan pradhan
Selected
I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.
(3 Questions)
- Q1. If there Hazzard is occur so what should we do first
- Ans.
The first thing to do in case of a hazard is to ensure the safety of yourself and others.
Assess the situation to determine the nature and extent of the hazard.
Alert others in the vicinity about the hazard.
Follow safety protocols and procedures to mitigate the hazard.
Contact emergency services if necessary.
Evacuate the area if instructed to do so.
- Q2. What should you do when their is no EV
- Q3. Also the DG suddenly stopped
(2 Questions)
- Q1. What should u do when dg fuel dosnot passess through a enjector
- Ans.
Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.
Inspect the fuel line for any clogs or blockages
Check the injector for any damage or malfunction
Clean the injector using appropriate tools and techniques
If cleaning doesn't work, consider replacing the injector
Ensure proper fuel flow and pressure to the injector
- Q2. How van we know earth leacage
- Ans.
Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).
Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.
A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.
Regular testing o...
I applied via Newspaper Ad and was interviewed in Nov 2023. There were 2 interview rounds.
Like technical and business development
(2 Questions)
- Q1. Say about yourself
- Ans. Hi, Good morning/good afternoon. My name is Yeshwanth Gullapalli. I completed my schooling in amaravati talent school, intermediate from Sri Gayatri Jr College and degree from ousmaniya University in 2023. We are five in our family my dad mom and 2 elder sisters one of the elder sister was married and she went to abroad and another elder sister was working in health care. My hobbys are I mostly like to do painting and...
- Q2. Tell about your hobbies
- Ans. I mostly like to do painting and Gardening
Selected
I applied via Job Portal and was interviewed in Mar 2024. There was 1 interview round.
(2 Questions)
- Q1. Past experience
- Q2. Why the gap in the resume
(3 Questions)
- Q1. What designing indian wire coloring
- Ans.
Indian wire coloring follows a specific standard for electrical design.
Indian wire coloring is based on the IS 694 standard
As per the standard, the color codes for wires are as follows:
- Phase wires: Red, Yellow, Blue
- Neutral wire: Black
- Earth wire: Green or Green with Yellow stripes
These color codes help in identifying and distinguishing different types of wires in electrical installations.
- Q2. Green color wire where are using only
- Ans.
Green color wire is commonly used for grounding purposes in electrical systems.
Green color wire is used for grounding electrical circuits to prevent electrical shock and protect equipment.
It is typically connected to the ground terminal of an electrical outlet or the grounding bus bar in a distribution panel.
Green color wire is also used for bonding metal parts of electrical equipment and structures to ensure electrica...
- Q3. What working maltmeter
- Ans.
A maltmeter is a device used by electrical technicians to measure the malt content in a substance.
A maltmeter is typically used in the brewing industry to measure the malt content in beer or other malt-based beverages.
It works by analyzing the specific gravity of the liquid, which is affected by the amount of malt present.
The maltmeter provides accurate measurements that help ensure the quality and consistency of the f...
Interview Preparation Tips
I applied via Approached by Company and was interviewed before Apr 2023. There were 3 interview rounds.
(1 Question)
- Q1. No interview question
Worst worst worst Test is Nothings
(4 Questions)
- Q1. Worst worst worst worst
- Ans.
The interviewer may have made a mistake or technical issue with the question.
It seems like the interviewer may have accidentally repeated the word 'worst' multiple times.
You can politely ask for clarification or confirmation on the question to ensure you understand it correctly.
Remain calm and composed while addressing the issue to show your professionalism.
Provide a thoughtful response based on your interpretation of
- Q2. Worst worst worst
- Ans.
The worst experience I had was when I accidentally caused a power outage in a large building during a critical event.
Accidentally causing a power outage in a large building
During a critical event
Dealing with the aftermath and fixing the issue quickly and efficiently
- Q3. Worst worst worst waste waste
- Ans.
The question seems to be asking about the candidate's experience with handling waste in an electrical technician role.
Discussing proper disposal methods for electronic waste
Explaining the importance of recycling materials in the field
Sharing experiences with hazardous waste management in electrical work
- Q4. Water water water
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.
(1 Question)
- Q1. How to read my cv . And selected me.
Interview Preparation Tips
- Induction Motors
- Transformers
I applied via Company Website and was interviewed in May 2022. There were 2 interview rounds.
Python
Interview Preparation Tips
- My self
- Technical Skills
I applied via Company Website and was interviewed in Jun 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. How to repair the Short circuit
- Ans.
To repair a short circuit, first identify the source of the short and then isolate it before repairing or replacing the damaged component.
Identify the source of the short circuit by checking for any burnt or damaged components
Isolate the short circuit by disconnecting power to the affected circuit
Repair or replace the damaged component causing the short circuit
Test the circuit to ensure the short circuit has been resol
Interview Preparation Tips
I applied via Walk-in and was interviewed before Mar 2021. There were 8 interview rounds.
(1 Question)
- Q1. Electrical testing in my experience knowledge
(1 Question)
- Q1. One on one Round number of questions one by one
(1 Question)
- Q1. Tell me about yourself.
Interview Preparation Tips
Mourya Aquex Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Electrical Engineer Interview Questions
- Diploma Electrical Engineer Interview Questions
- Electrical Supervisor Interview Questions
- Electrical Maintenance Engineer Interview Questions
- Electrical Maintenance Technician Interview Questions
- Electrical Foreman Interview Questions
- Senior Electrical Technician Interview Questions
- Junior Engineer Electrical Interview Questions
- Show more
Electrical Technician Interview Questions from Similar Companies
Mourya Aquex Electrical Technician Reviews and Ratings
based on 1 review
Rating in categories
|
Junior Accountant
3
salaries
|  ₹2 L/yr - ₹3 L/yr |
|
Senior Accountant
3
salaries
| ₹0.2 L/yr - ₹0.2 L/yr |
|
Shift Incharge
3
salaries
| ₹3 L/yr - ₹3 L/yr |
|
Electrical Technician
3
salaries
| ₹2.2 L/yr - ₹2.4 L/yr |
|
Electrical Incharge
3
salaries
| ₹3.5 L/yr - ₹4 L/yr |
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- Mourya Aquex Interview Questions >
- Mourya Aquex Electrical Technician Interview Questions
