Filter interviews by
Clear (1)
I applied via Recruitment Consulltant and was interviewed in Nov 2023. There were 2 interview rounds.
Hard coat process is a method of applying a durable protective coating to a surface to increase its resistance to wear and corrosion.
Hard coat process involves applying a tough, abrasion-resistant coating to a surface.
This coating is typically made of materials like ceramics, polymers, or metals.
The process can be used on various materials such as metals, plastics, and glass.
Hard coat process is commonly used in indust...
UV energy is electromagnetic radiation with a wavelength shorter than that of visible light, and intensity refers to the amount of UV energy present.
UV energy is a form of electromagnetic radiation with a wavelength shorter than that of visible light.
Intensity refers to the amount of UV energy present in a given area.
UV energy and intensity are important factors to consider in processes like curing coatings or in medic
DFT stands for Dry Film Thickness and IPL stands for Initial Paint Layer.
DFT refers to the thickness of the paint film after it has dried and cured.
IPL refers to the first layer of paint applied to a surface.
Both DFT and IPL are important factors in ensuring the quality and durability of a paint job.
TTR stands for Time to Repair, which is the amount of time it takes to repair a piece of equipment or machinery.
TTR is an important metric in maintenance and repair operations.
It helps in measuring the efficiency of maintenance processes.
For example, if a machine breaks down and it takes 2 hours to repair, the TTR would be 2 hours.
Process control involves monitoring and adjusting variables to ensure consistency and quality.
Establish clear process parameters and specifications
Regularly monitor and collect data on key variables
Use statistical process control methods to analyze data and identify trends
Implement corrective actions when deviations occur
Train employees on proper procedures and protocols
Utilize automation and technology for real-time m
I was interviewed in May 2023.
Top trending discussions
I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.
posted on 23 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
I have a valid driver's license for both cars and motorcycles.
I have a Class C license for cars
I also have a Class M license for motorcycles
I have a clean driving record with no accidents or violations
I ride a road bike for commuting and a mountain bike for leisure.
I prefer road bikes for their speed and efficiency on paved roads.
I enjoy mountain biking for the challenge and adventure of off-road trails.
I also have experience with hybrid bikes for their versatility.
I prioritize safety and always wear a helmet and follow traffic laws.
I have participated in charity rides and group rides for fun and community.
Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.
Testing can include physical tests such as crash tests, durability tests, and performance tests.
Simulation and modeling can also be used to test vehicle components and systems.
Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European
We conduct various types of homologation testing depending on the product and its intended market.
We conduct safety testing to ensure compliance with local regulations.
We perform emissions testing to ensure compliance with environmental regulations.
We conduct performance testing to ensure the product meets the required standards.
We also conduct durability testing to ensure the product can withstand the expected wear an...
Use quality tools like Pareto chart, fishbone diagram, and 5 Whys to analyze and address customer complaints.
Identify the root cause of the complaint using tools like fishbone diagram.
Prioritize the issues using a Pareto chart to focus on the most critical problems first.
Use the 5 Whys technique to dig deeper into the root cause of the complaint.
Implement corrective actions based on the analysis to prevent similar comp
I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.
7QC tools are a set of quality control tools used for process improvement and problem-solving.
Check sheet: Used to collect and analyze data, such as tallying defects in a manufacturing process.
Pareto chart: Helps identify the most significant factors contributing to a problem, based on the 80/20 rule.
Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.
Histogram: Repre...
QA focuses on preventing defects in the process, while QC focuses on identifying defects in the product.
QA is process oriented, focusing on preventing defects by improving processes and procedures.
QC is product oriented, focusing on identifying defects through testing and inspection.
QA involves activities like reviews, audits, and process improvements.
QC involves activities like testing, inspections, and quality contro...
FMEA stands for Failure Modes and Effects Analysis, a systematic method for identifying and preventing potential failures in a system.
FMEA is a structured approach to identifying and prioritizing potential failure modes in a system.
It involves analyzing the potential effects of these failures and developing mitigation strategies.
FMEA helps in improving the reliability, safety, and quality of a system or process.
There a...
Process & product audit type of poka yoke ensures errors are prevented during audits.
Poka yoke in process audit involves using checklists to ensure all steps are followed correctly
Poka yoke in product audit involves using sensors to detect defects before they occur
Examples include using color-coded labels to prevent mix-ups in audits
I applied via Naukri.com and was interviewed in Jul 2021. There were 3 interview rounds.
posted on 17 Jun 2024
I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.
posted on 10 Aug 2022
I applied via Walk-in
based on 2 interviews
Interview experience
based on 6 reviews
Rating in categories
Engineer
308
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
281
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
260
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
252
salaries
| ₹0 L/yr - ₹0 L/yr |
Trainee Technician
237
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Sundaram Clayton
Rane Group
UNO Minda