Upload Button Icon Add office photos

Filter interviews by

Motherson Automotive Technologies and Engineering Junior Engineer Interview Questions and Answers

Updated 20 Jun 2021

Motherson Automotive Technologies and Engineering Junior Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed in Dec 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. You are yes/not quality person
  • Q2. Did you know asurance docs and paint defects
  • Ans. 

    Yes, I am familiar with assurance docs and paint defects.

    • Assurance docs refer to the documentation related to quality assurance processes and procedures.

    • Paint defects are imperfections or flaws in the paint finish, such as bubbles, cracks, or uneven application.

    • Understanding assurance docs helps in ensuring quality standards are met in engineering projects.

    • Knowledge of paint defects is important for identifying and res

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls studied person come to my company, and let's start your good carrier

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Write NC program PFMEA details and knowledge of depth to proportion GD&T Past company experience and technical knowledge, cast reduction, process knowledge
Round 3 - One-on-one 

(1 Question)

  • Q1. Technical round 2. Interviewed by ME head. Capacity calculation,line balancing,PPAP,APQP,MSD,machine selaction, process selection.

Interview Preparation Tips

Interview preparation tips for other job seekers - I you have too technical knowledge you will get the job definitely.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Case Study 

Problem and route cause

Round 3 - One-on-one 

(1 Question)

  • Q1. Process and risk assessment
Round 4 - Technical 

(1 Question)

  • Q1. Quality tools and assurance activities

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong with what you have put in your resume
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself?
  • Q2. Parameters of costing?
  • Ans. 

    Parameters of costing refer to the factors that influence the cost of a product or service.

    • Parameters can include materials, labor, overhead, and profit margin.

    • Other factors like transportation costs, taxes, and market demand can also impact costing.

    • Understanding and analyzing these parameters is crucial for accurate pricing and cost control.

    • For example, in manufacturing, the cost of raw materials and labor are key par

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please make your CV effective & to the point. Don't put any irrelevant thing which you don't know.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Introduction of ypur
  • Ans. 

    I am a highly experienced Sr. Engineer with a strong background in various engineering disciplines.

    • Over 10 years of experience in mechanical, electrical, and civil engineering

    • Led multiple successful projects from concept to completion

    • Proficient in CAD software such as AutoCAD and SolidWorks

  • Answered by AI
  • Q2. Salary discussion and discussion about pearks.
Round 3 - Technical 

(2 Questions)

  • Q1. Your kra and dwm Discussion related to your work field.
  • Q2. Why we select you ,what is your goods & bad,

Interview Preparation Tips

Topics to prepare for Krishna Maruti Senior Engineer interview:
  • Line balacing
  • Lean Manufacturing Tools
  • 4m change
  • Redbin analysis
  • Rejection Control
  • Productivity Improvement
  • OEE Calculation
  • Kaizen Implementation
  • 5S System
  • Breakdown Analysis
  • Process parameters
  • Measuring instrument
  • MSA
  • SPC Study
Interview preparation tips for other job seekers - Interviewer is just seeking a experience holder who is having relevant knowledge. And uses the key tells

I applied via Approached by Company and was interviewed in Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. What was responsibility routine work
  • Ans. 

    Routine work responsibilities include performing regular tasks and duties as part of the job.

    • Routine work responsibilities involve completing daily, weekly, or monthly tasks

    • These tasks are typically outlined in job descriptions or standard operating procedures

    • Examples of routine work responsibilities may include data entry, report generation, equipment maintenance, etc.

  • Answered by AI
  • Q2. Tell me about your self
  • Ans. 

    I am a senior engineer with expertise in [specific field]. I have [number] years of experience in [industry/technology].

    • Expertise in [specific field]

    • Years of experience in [industry/technology]

    • Accomplishments or projects related to [specific field/technology]

    • Skills or certifications relevant to the position

    • Passion for continuous learning and professional development

  • Answered by AI
  • Q3. What is achieved in previous organisation
  • Ans. 

    Implemented a new software system that improved efficiency and reduced costs by 20%.

    • Implemented a new software system

    • Improved efficiency

    • Reduced costs by 20%

  • Answered by AI
  • Q4. What is the sallary expectations
  • Ans. 

    My salary expectations are negotiable and dependent on the overall compensation package offered.

    • I am open to discussing salary expectations based on the responsibilities and requirements of the position

    • I am looking for a fair and competitive compensation package

    • I am willing to consider other benefits such as healthcare, retirement plans, and vacation time

    • I am interested in opportunities for growth and advancement withi

  • Answered by AI
  • Q5. Documents verification
Round 3 - HR 

(1 Question)

  • Q1. Salary Expectations & documents verification

Interview Preparation Tips

Interview preparation tips for other job seekers - For carriers growth , different types of work knowledge gaining, market study..
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How to handle customer complain used quality tool
  • Ans. 

    Use quality tools like Pareto chart, fishbone diagram, and 5 Whys to analyze and address customer complaints.

    • Identify the root cause of the complaint using tools like fishbone diagram.

    • Prioritize the issues using a Pareto chart to focus on the most critical problems first.

    • Use the 5 Whys technique to dig deeper into the root cause of the complaint.

    • Implement corrective actions based on the analysis to prevent similar comp

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. 7qc tools & describe it as per example
  • Ans. 

    7QC tools are a set of quality control tools used for process improvement and problem-solving.

    • Check sheet: Used to collect and analyze data, such as tallying defects in a manufacturing process.

    • Pareto chart: Helps identify the most significant factors contributing to a problem, based on the 80/20 rule.

    • Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.

    • Histogram: Repre...

  • Answered by AI
  • Q2. Difference between QA & QC
  • Ans. 

    QA focuses on preventing defects in the process, while QC focuses on identifying defects in the product.

    • QA is process oriented, focusing on preventing defects by improving processes and procedures.

    • QC is product oriented, focusing on identifying defects through testing and inspection.

    • QA involves activities like reviews, audits, and process improvements.

    • QC involves activities like testing, inspections, and quality contro...

  • Answered by AI
  • Q3. Define of FMEA TYPE
  • Ans. 

    FMEA stands for Failure Modes and Effects Analysis, a systematic method for identifying and preventing potential failures in a system.

    • FMEA is a structured approach to identifying and prioritizing potential failure modes in a system.

    • It involves analyzing the potential effects of these failures and developing mitigation strategies.

    • FMEA helps in improving the reliability, safety, and quality of a system or process.

    • There a...

  • Answered by AI
  • Q4. Process & product audit type of poka yoke
  • Ans. 

    Process & product audit type of poka yoke ensures errors are prevented during audits.

    • Poka yoke in process audit involves using checklists to ensure all steps are followed correctly

    • Poka yoke in product audit involves using sensors to detect defects before they occur

    • Examples include using color-coded labels to prevent mix-ups in audits

  • Answered by AI
  • Q5. 8D Capa, 5S, pervios company job profile and DWM

I applied via Recruitment Consultant

Interview Questionnaire 

1 Question

  • Q1. What is QMS and TPM system
  • Ans. 

    QMS stands for Quality Management System and TPM stands for Total Productive Maintenance System.

    • QMS is a set of policies, processes, and procedures required for planning and execution of quality control.

    • TPM is a maintenance program that aims to maximize equipment effectiveness and minimize downtime.

    • QMS focuses on meeting customer requirements and improving customer satisfaction.

    • TPM focuses on improving equipment reliab...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I was good experience to face interviewers with deep technical discussion.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is 7QC tools and how many document in this
  • Ans. 

    The 7QC tools are a set of quality control tools used in process improvement. There are 7 tools in total.

    • The 7QC tools are: Pareto Chart, Cause and Effect Diagram, Check Sheet, Histogram, Scatter Diagram, Control Chart, and Flowchart.

    • These tools are used to identify, analyze, and solve quality-related problems in various processes.

    • Each tool serves a specific purpose, such as identifying the most significant issues (Par...

  • Answered by AI
  • Q2. What is a MSA and how many type of MSA study?
  • Ans. 

    MSA stands for Measurement System Analysis. There are two types of MSA studies: Attribute Agreement Analysis and Variable Gauge R&R Study.

    • MSA is a method used to assess the measurement system's capability to provide accurate and reliable data.

    • Attribute Agreement Analysis is used when the measurement system classifies items into categories.

    • Variable Gauge R&R Study is used when the measurement system provides numerical m...

  • Answered by AI
  • Q3. What is a MSA study criteria?
  • Ans. 

    MSA study criteria refers to the guidelines and requirements for conducting a Measurement System Analysis.

    • MSA study criteria outline the steps and procedures for evaluating the measurement system used in a process.

    • It includes criteria for selecting appropriate measurement tools and techniques.

    • The criteria define the acceptable levels of accuracy, precision, linearity, and stability for the measurement system.

    • It also in...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Why change you your previous company?
  • Ans. Previous company salary growth not givan by ITI holder employes & technical person his required qualification minimum Diploma. And I am completed dilpoma last 3 year,so that my salary expectation is more.
  • Answered Anonymously
  • Q2. How many salary expectation ?

Motherson Automotive Technologies and Engineering Interview FAQs

What are the top questions asked in Motherson Automotive Technologies and Engineering Junior Engineer interview?

Some of the top questions asked at the Motherson Automotive Technologies and Engineering Junior Engineer interview -

  1. Did you know asurance docs and paint defec...read more
  2. You are yes/not quality per...read more

Tell us how to improve this page.

Motherson Automotive Technologies and Engineering Junior Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
20% less than the average Junior Engineer Salary in India
View more details

Motherson Automotive Technologies and Engineering Junior Engineer Reviews and Ratings

based on 9 reviews

4.3/5

Rating in categories

4.1

Skill development

3.9

Work-life balance

3.3

Salary

4.2

Job security

4.1

Company culture

3.1

Promotions

4.1

Work satisfaction

Explore 9 Reviews and Ratings
Engineer
361 salaries
unlock blur

₹2 L/yr - ₹7 L/yr

Assistant Engineer
277 salaries
unlock blur

₹1.5 L/yr - ₹5.4 L/yr

Senior Engineer
263 salaries
unlock blur

₹3.6 L/yr - ₹10.5 L/yr

Assistant Manager
241 salaries
unlock blur

₹4.8 L/yr - ₹14 L/yr

Trainee Technician
240 salaries
unlock blur

₹1.4 L/yr - ₹3.6 L/yr

Explore more salaries
Compare Motherson Automotive Technologies and Engineering with

Delphi TVS

3.9
Compare

Belrise Industries

3.8
Compare

Krishna Maruti

4.0
Compare

Faurecia

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview