Filter interviews by
Process calculation involves analyzing data, applying formulas, and making decisions based on the results.
Gather relevant data such as measurements, specifications, and requirements
Apply appropriate formulas and equations to analyze the data
Interpret the results to make informed decisions and adjustments
Examples: calculating stress and strain in a mechanical component, determining flow rates in a piping system
I applied via Naukri.com and was interviewed before May 2018. There were 5 interview rounds.
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
I applied via Campus Placement and was interviewed before Mar 2020. There were 4 interview rounds.
I applied via Walk-in and was interviewed in Dec 2020. There were 3 interview rounds.
I applied via Company Website and was interviewed in Mar 2021. There was 1 interview round.
I applied via Company Website and was interviewed before Mar 2022. There was 1 interview round.
The manufacturing of cement involves chemical reactions with water, resulting in the durability of concrete.
Cement is made by heating limestone, clay, and other materials in a kiln
The chemical reaction between cement and water, known as hydration, results in the hardening of concrete
The durability of concrete depends on factors such as the water-cement ratio, curing time, and quality of materials used
Calculate deflection at free end of cantilever beam with point load at end
Use the formula: δ = (PL³)/(3EI)
P is the point load at the end
L is the length of the cantilever beam
E is the modulus of elasticity of the beam material
I is the moment of inertia of the beam's cross-sectional area
Example: A steel cantilever beam with a length of 2 meters and a point load of 500 N at the end has a deflection of 0.104 mm
Camber is the slope provided to the road surface to drain off rainwater. It is achieved by raising the center of the road surface.
Camber is the curvature provided to the road surface to ensure proper drainage of rainwater.
It is achieved by raising the center of the road surface.
The amount of camber depends on the width of the road and the expected rainfall.
The steps for the construction of a road include surveying, cle...
Admixtures are chemicals added to concrete to enhance its properties. They affect the workability, strength, and durability of concrete.
Admixtures are added to concrete to improve its quality and performance.
They can affect the setting time, workability, strength, and durability of concrete.
Examples of admixtures include water reducers, accelerators, retarders, air-entraining agents, and superplasticizers.
Hoop stress is the stress exerted circumferentially in a cylindrical or spherical object. Reinforcement in a dome can be provided by using steel bars or mesh.
Hoop stress is caused by the pressure inside the object and is calculated using the formula P*r/t, where P is the pressure, r is the radius, and t is the thickness of the object.
In a dome, reinforcement can be provided by using steel bars or mesh that are placed i...
Estimation and costing involves calculating the expenses of a project. No. of bricks required in 1 m3 of brickwork depends on the size of the bricks. There are various types of contracts in construction.
Estimation and costing involves calculating the expenses of a project, including materials, labor, and other costs.
No. of bricks required in 1 m3 of brickwork depends on the size of the bricks used. For example, if stan...
I applied via Campus Placement and was interviewed in Apr 2022. There were 3 interview rounds.
120 questions in 120 minutes. 30 questions from English,30 questions from your stream,30 basic aptitude,30 current affairs type question
A 4 stroke engine is an internal combustion engine that completes 4 strokes in one cycle.
The four strokes are intake, compression, combustion, and exhaust.
In the intake stroke, the fuel-air mixture is drawn into the cylinder.
In the compression stroke, the mixture is compressed to increase its temperature and pressure.
In the combustion stroke, the mixture is ignited and the resulting explosion pushes the piston down.
In ...
Laser beam welding is a process of joining two metal pieces using a laser beam.
Laser beam welding is a non-contact process.
It uses a high-energy laser beam to melt and fuse the metal pieces together.
It is commonly used in the automotive, aerospace, and electronics industries.
It produces a narrow and deep weld with minimal distortion.
Examples include welding of car body parts, aircraft engine components, and electronic
based on 1 interview
Interview experience
Senior Engineer
18
salaries
| ₹4.4 L/yr - ₹7.2 L/yr |
Civil Site Engineer
15
salaries
| ₹1.8 L/yr - ₹4.5 L/yr |
Billing Engineer
10
salaries
| ₹3 L/yr - ₹4.9 L/yr |
Site Engineer
10
salaries
| ₹2.5 L/yr - ₹4.6 L/yr |
Executive Accountant
9
salaries
| ₹2 L/yr - ₹3.8 L/yr |
Quess
L&T Construction
Ekart Logistics
Udaan