Upload Button Icon Add office photos

Filter interviews by

Kobelco Construction Equipment India Service Technician Interview Questions and Answers

Updated 26 Mar 2024

Kobelco Construction Equipment India Service Technician Interview Experiences

1 interview found

Service Technician Interview Questions & Answers

user image sunil nagrikar

posted on 12 Jan 2023

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Boom operations slow
  • Ans. 

    Boom operations may be slow due to various reasons such as mechanical issues, operator error, or lack of maintenance.

    • Check for any mechanical issues with the boom equipment

    • Ensure the operator is properly trained and following correct procedures

    • Regularly maintain and service the boom equipment to prevent slowdowns

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Service technician

Interview questions from similar companies

I applied via Naukri.com and was interviewed before May 2018. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Explain about open loop & close loop operation in hydraulic system.
  • Ans. 

    Open loop and closed loop are two modes of operation in hydraulic systems.

    • Open loop operation: The hydraulic system operates without feedback control. The output is not adjusted based on the system's performance.

    • Closed loop operation: The hydraulic system uses feedback control to adjust the output based on the system's performance.

    • Open loop systems are simpler and less expensive, but they lack precision and accuracy.

    • Cl...

  • Answered by AI
  • Q2. Explain about Starting circuit.
  • Ans. 

    The starting circuit is responsible for initiating the engine's operation.

    • The starting circuit consists of components such as the battery, starter motor, ignition switch, and solenoid.

    • When the ignition switch is turned on, it sends a signal to the solenoid, which then engages the starter motor.

    • The starter motor uses electrical energy from the battery to turn the engine's crankshaft, starting the combustion process.

    • Once...

  • Answered by AI
  • Q3. Why should we hire you ?
  • Ans. 

    I am a highly skilled and experienced service engineer with a proven track record of successfully troubleshooting and resolving complex technical issues.

    • I have a strong technical background and extensive experience in diagnosing and repairing equipment.

    • I am a quick learner and can adapt to new technologies and processes easily.

    • I have excellent communication skills and can effectively communicate with customers and team...

  • Answered by AI
  • Q4. What is your core values ?
  • Ans. 

    My core values include integrity, accountability, and continuous learning.

    • Integrity: I believe in always doing the right thing, even when no one is watching.

    • Accountability: I take ownership of my actions and responsibilities.

    • Continuous learning: I strive to constantly improve my skills and knowledge.

    • Example: I once discovered a mistake in a project I was working on, and instead of ignoring it, I took responsibility and...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Questions based upon technical knowledge like engine, basic electrical & basic hydraulics.

General Tips: You should have deep knowledge about hydraulics system & DC electrics.
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-3 Months

I applied via Approached by Company and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basic hydraulic symbols

Interview Preparation Tips

Interview preparation tips for other job seekers - This is worst management don't join this company.
No any career growth once joined this company
Interview process is basic hydraulic symbols only.

Interview Questionnaire 

5 Questions

  • Q1. Tell me about yourself?
  • Ans. 

    I am a Service Engineer with expertise in troubleshooting and repairing complex machinery.

    • Experienced in diagnosing and resolving technical issues in industrial equipment

    • Proficient in using diagnostic tools and software to identify problems

    • Skilled in performing maintenance and repairs on various types of machinery

    • Strong problem-solving and communication skills

    • Ability to work independently and under pressure

    • Example: Suc...

  • Answered by AI
  • Q2. Why hydraulics Ram has different speed in head side and rod Side?
  • Ans. 

    The speed difference in a hydraulic ram is due to the difference in effective areas on the head side and rod side.

    • The head side of the ram has a larger effective area, resulting in slower speed.

    • The rod side of the ram has a smaller effective area, resulting in faster speed.

    • This speed difference is a result of the hydraulic pressure acting on different areas.

    • The speed ratio between the head side and rod side can be calc...

  • Answered by AI
  • Q3. What is the purpose of pressure relief valve?
  • Ans. 

    A pressure relief valve is used to protect equipment and systems from excessive pressure by releasing the pressure when it exceeds a certain limit.

    • Prevents damage to equipment and systems

    • Ensures safety of personnel

    • Maintains system integrity

    • Prevents explosions or ruptures

    • Relieves excess pressure by opening and releasing fluid or gas

    • Commonly used in boilers, pressure vessels, pipelines, and hydraulic systems

  • Answered by AI
  • Q4. What is orifice?
  • Ans. 

    An orifice is a small opening or hole through which fluid or gas can flow.

    • Orifices are commonly used in various industries, such as plumbing, engineering, and manufacturing.

    • They are often used to control the flow rate of fluids or gases.

    • Orifices can be found in devices like nozzles, valves, and flow meters.

    • The size of an orifice determines the flow rate and pressure drop across it.

    • Examples of orifices include the tiny ...

  • Answered by AI
  • Q5. Why you looking for a job change?
  • Ans. 

    I am looking for a job change to explore new opportunities and challenges.

    • Seeking career growth and advancement

    • Wanting to work in a different industry or with different technologies

    • Desire for a better work-life balance

    • Relocation or proximity to family

    • Unsatisfactory current job situation

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just give your introduction very simple short and sweet it's not to be so lengthy.
And the technical round is very simple as always. It consists of mainly Basics.
So don't worry...!!

Best of Luck...!!

Service Engineer Interview Questions & Answers

Liebherr user image SMRITI KISHOR DAS

posted on 18 Apr 2022

I applied via Naukri.com and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Basics Hydraulics, Basic electrical, Sensors, PLC
Round 2 - HR 

(8 Questions)

  • Q1. What are your strengths and weaknesses?
  • Q2. Why are you looking for a change?
  • Q3. Why should we hire you?
  • Q4. What are your salary expectations?
  • Q5. What is your family background?
  • Q6. Share details of your previous job.
  • Q7. Where do you see yourself in 5 years?
  • Q8. Tell me about yourself.

Interview Preparation Tips

Topics to prepare for Liebherr Service Engineer interview:
  • Hydraulics
Interview preparation tips for other job seekers - Keep motivated yourself whatever the situation is.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the AC DC transformer moter automation
  • Ans. 

    AC DC transformer motor automation is a process of controlling and regulating the operation of a motor using an AC DC transformer.

    • AC DC transformer motor automation involves converting AC power to DC power using a transformer.

    • The DC power is then used to control and regulate the operation of a motor.

    • This automation process allows for efficient and precise control of motor speed, torque, and direction.

    • Examples of AC DC ...

  • Answered by AI
  • Q2. Technical question AC

Interview Preparation Tips

Interview preparation tips for other job seekers - I am working as a service Engineer in Moradabad and am 8 year experience
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Electronic qualification
Round 2 - Technical 

(2 Questions)

  • Q1. Electronic information
  • Q2. Transistor and electrical supply and earthing

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice job
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Technical related to concrete machines & sales questions related to Area & Territory
Round 2 - HR 

(1 Question)

  • Q1. Ctc related questions

I applied via Naukri.com

Interview Questionnaire 

2 Questions

  • Q1. Basics hydraulics, Basic electricals, Hydraulic Schematic. Basics in engine.
  • Q2. Every question was on basics things.

Interview Preparation Tips

Interview preparation tips for other job seekers - They are looking for strong basics from hydraulic and electrics. Also communication skills need to be good as well you have to handle customer lik

Service Engineer Interview Questions & Answers

Liebherr user image SURYAKANTA DEHURY

posted on 23 Feb 2025

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Engine hydraulic electrical

Kobelco Construction Equipment India Interview FAQs

How many rounds are there in Kobelco Construction Equipment India Service Technician interview?
Kobelco Construction Equipment India interview process usually has 2 rounds. The most common rounds in the Kobelco Construction Equipment India interview process are Resume Shortlist and HR.

Tell us how to improve this page.

Kobelco Construction Equipment India Service Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Kobelco Construction Equipment India Service Technician Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

5.0

Skill development

4.0

Work-life balance

4.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
71 salaries
unlock blur

₹5 L/yr - ₹10.9 L/yr

Senior Engineer
51 salaries
unlock blur

₹4 L/yr - ₹6.6 L/yr

Deputy Manager
34 salaries
unlock blur

₹8 L/yr - ₹13 L/yr

Service Engineer
33 salaries
unlock blur

₹1.4 L/yr - ₹6 L/yr

Engineer
29 salaries
unlock blur

₹2.5 L/yr - ₹5 L/yr

Explore more salaries
Compare Kobelco Construction Equipment India with

Gilbarco Veeder Root

3.8
Compare

Kirloskar Toyota Textile Machinery

4.5
Compare

HYT Engineering

3.2
Compare

L&T–MHI Power Boilers

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview