Upload Button Icon Add office photos

JSW Group

Compare button icon Compare button icon Compare

Filter interviews by

JSW Group Welding Technician Interview Questions and Answers

Updated 15 Mar 2024

JSW Group Welding Technician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. I will discharge my duty with full mind , responsibility and challenge to achieve optimum utilization of its resources and maximum profits .
  • Q2. Worked in mechanical department for 1 one year

Interview Preparation Tips

Interview preparation tips for other job seekers - To enhance my professional skills , capabilities and knowledge in an organisation which recognizes the value of hard work and trust .

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Electrical motor pm
  • Q2. Hi Mac tower lighting
  • Q3. Panel maintenance
  • Q4. Himansh tower lighting
  • Q5. Motor pm registence value

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrician
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. MELTING FURNACE
  • Q2. MACHINE OPERATOR
  • Q3. ABOUT SAFETY and precautions
  • Q4. TOOLS and equipment
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
No response

I applied via Walk-in and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

About my working experience

Round 2 - Technical 

(3 Questions)

  • Q1. Vernier scale reading?
  • Q2. Micrometre reading?
  • Q3. How I making alloy
  • Ans. 

    Alloys are made by combining two or more metals to create a new material with improved properties.

    • Select the metals to be combined based on desired properties

    • Melt the metals together in a furnace

    • Mix the molten metals thoroughly

    • Cool and solidify the mixture to form the alloy

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare cause and solution of your problem
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. File is made of
  • Q2. Steel rule is a made of
  • Q3. The point angle of scriber is
  • Ans. 

    The point angle of scriber is the angle between the two cutting edges of the scriber.

    • The point angle is typically between 30 and 60 degrees.

    • It affects the sharpness and durability of the scriber.

    • A larger point angle will result in a stronger but less sharp scriber.

    • A smaller point angle will result in a sharper but less durable scriber.

  • Answered by AI
  • Q4. The point angle of centre punch
  • Ans. 

    The point angle of a centre punch is typically 90 degrees.

    • The point angle is the angle between the two sides of the punch tip.

    • A 90 degree point angle is the most common and versatile for general use.

    • Different point angles can be used for specific applications, such as 60 degrees for softer materials.

    • The point angle affects the size and shape of the indentation made by the punch.

  • Answered by AI
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Bearing fittings Gearbox assembly
  • Q2. Job requirment all equipment check
  • Q3. So damage part ready prayority damage part change

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintenance any ccs machine all check equipment

I was interviewed in Jun 2022.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the inner diameter of ball bearing 1212
  • Ans. 

    The inner diameter of ball bearing 1212 is 12 mm.

    • The inner diameter of ball bearing 1212 is a measurement of the distance across the center of the bearing's inner ring.

    • It is typically expressed in millimeters (mm).

    • In the case of ball bearing 1212, the inner diameter is 12 mm.

  • Answered by AI
  • Q2. Which bearing uses in I'd fan?
  • Ans. 

    The bearing used in an ID fan is typically a ball bearing.

    • ID fans in industrial applications often use ball bearings for their high load capacity and durability.

    • Ball bearings are designed to handle radial and axial loads, making them suitable for the rotating shaft of an ID fan.

    • Other types of bearings, such as roller bearings or sleeve bearings, may also be used depending on the specific requirements of the ID fan.

  • Answered by AI
  • Q3. How to measure clearance of bearing in dia?
  • Ans. 

    The clearance of a bearing in diameter can be measured using a micrometer or a dial gauge.

    • Use a micrometer or a dial gauge to measure the diameter of the bearing.

    • Measure the diameter at multiple points around the bearing to ensure accuracy.

    • Subtract the measured diameter from the specified or nominal diameter to calculate the clearance.

    • Clearance can be positive (when the measured diameter is smaller than the specified d...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I want to mechanical technicians job for my future and life to be secure .
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. What is the unit of resistance?
  • Q2. How is 1 horsepower (hp) defined in relation to kilowatt-hours (kWh)?
  • Q3. Star connection drawing
  • Q4. Dol stature drawing

Interview Preparation Tips

Interview preparation tips for other job seekers - Very good and friendly.

I applied via Naukri.com and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Knowledge of welding consumables, welding coded and standards
  • Q2. Knowledge of fabrication drawings
  • Q3. Knowledge of welding machines

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare welding concepts well, have good knowledge about fabrication drawings
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. Elactrician project work
  • Ans. 

    Electrician project work involves installation, maintenance, and repair of electrical systems.

    • Electricians install and wire electrical systems in residential, commercial, and industrial buildings.

    • They troubleshoot and repair electrical faults and malfunctions.

    • They perform regular maintenance and inspections to ensure safety and compliance.

    • Electricians may work on projects such as wiring new buildings, upgrading electri...

  • Answered by AI
  • Q2. Control cable conaction
  • Q3. Lt cable conection
  • Q4. Cable laying work
  • Ans. 

    Cable laying work involves the installation of cables for various purposes.

    • Cable laying work is done to establish connections for electricity, telecommunications, or data transmission.

    • It involves the process of laying cables underground, underwater, or overhead.

    • Cable laying technicians use specialized equipment and tools to ensure proper installation and maintenance.

    • Examples of cable laying work include laying fiber op...

  • Answered by AI
  • Q5. It cable laying
  • Q6. Elactrical costions

JSW Group Interview FAQs

How many rounds are there in JSW Group Welding Technician interview?
JSW Group interview process usually has 1 rounds. The most common rounds in the JSW Group interview process are Technical.
What are the top questions asked in JSW Group Welding Technician interview?

Some of the top questions asked at the JSW Group Welding Technician interview -

  1. I will discharge my duty with full mind , responsibility and challenge to achie...read more
  2. Worked in mechanical department for 1 one y...read more

Tell us how to improve this page.

JSW Group Welding Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 835 Interviews
JSW Steel Interview Questions
3.9
 • 580 Interviews
Tata Group Interview Questions
4.2
 • 358 Interviews
Jindal Stainless Interview Questions
4.2
 • 202 Interviews
View all
Assistant Manager
256 salaries
unlock blur

₹4.9 L/yr - ₹12.5 L/yr

Graduate Engineer Trainee (Get)
156 salaries
unlock blur

₹5.5 L/yr - ₹10 L/yr

Deputy Manager
106 salaries
unlock blur

₹6.2 L/yr - ₹21 L/yr

Manager
85 salaries
unlock blur

₹8.1 L/yr - ₹23 L/yr

Senior Engineer
74 salaries
unlock blur

₹5 L/yr - ₹9.1 L/yr

Explore more salaries
Compare JSW Group with

Tata Group

4.2
Compare

Adani Group

3.9
Compare

Reliance Industries

4.0
Compare

Bharti Enterprises

3.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview