Filter interviews by
I was interviewed in Jul 2017.
I applied via Walk-in and was interviewed before Jun 2021. There were 2 interview rounds.
An antipumping relay is used to prevent the breaker from repeatedly closing and opening in case of a fault.
The antipumping relay is a protective device used in circuit breakers.
It prevents the breaker from 'pumping' or repeatedly closing and opening due to a fault.
When a fault occurs, the relay detects the fault current and prevents the breaker from reclosing until the fault is cleared.
This helps to protect the electri...
I was interviewed in Mar 2021.
I applied via Company Website and was interviewed in Nov 2020. There were 3 interview rounds.
I was interviewed in May 2019.
Steel sections are structural shapes made from steel for construction purposes.
I-beams
H-beams
C-channels
Angle sections
T-sections
Z-sections
Box sections
Circular sections
Different types of loads applied on long and short steel columns
Long columns are more susceptible to buckling under compressive loads
Short columns are more susceptible to crushing under compressive loads
Long columns are more likely to experience bending under lateral loads
Short columns are more likely to experience shear under lateral loads
Examples of loads include dead load, live load, wind load, seismic load, etc.
I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.
Current affairs and technical both questions will come be ready
I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.
Density of slurry is the mass of the slurry per unit volume.
Density of slurry is typically measured in kg/m^3 or lb/ft^3.
It is calculated by dividing the mass of the slurry by its volume.
The density of slurry can vary depending on the concentration of solids in the liquid.
For example, a slurry with a high concentration of solids will have a higher density.
SPL stands for Sound Pressure Level and SEL stands for Sound Exposure Level.
SPL is a measure of sound intensity relative to a reference level.
SEL is a measure of sound exposure over a period of time, typically in decibels.
Both SPL and SEL are commonly used in the field of acoustics and noise control.
The red area typically refers to a section or region that is highlighted or marked in the color red.
Red area can indicate danger or warning.
In engineering, red areas on diagrams or blueprints may signify areas of high risk or critical components.
Examples: red area on a map indicating a fire hazard zone, red area on a circuit diagram highlighting a high voltage section.
based on 1 interview
Interview experience
based on 5 reviews
Rating in categories
Junior Engineer
1.2k
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Manager
1.1k
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive Engineer
691
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
651
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
400
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel