Jindal Stainless Diploma Engineer Trainee - DET Interview Questions and Answers

Q1. What is motor and sigal phase and three phase motar difference
Ans. 
A motor is a device that converts electrical energy into mechanical energy, while a signal phase motor operates on single phase power and a three phase motor operates on three phase power.
• Motor is a device that converts electrical energy into mechanical energy

• Single phase motor operates on single phase power

• Three phase motor operates on three phase power

• Three phase motors are more efficient and have higher power output
Answered by AI
View 1 more answer
Q2. What is transformer
Ans. 
A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Transformers are used to increase or decrease voltage levels in electrical power transmission.

• They consist of two coils of wire, known as the primary and secondary windings, wrapped around a core made of magnetic material.

• Transformers are essential in the distribution of electricit...read more
Answered by AI
Add your answer

Q1. What is transformer
Ans. 
A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Transformers are used to increase or decrease the voltage in electrical power applications.

• They consist of two coils of wire, known as the primary and secondary windings, which are wrapped around a core made of ferromagnetic material.

• Transformers are essential in power distribution...read more
Answered by AI
View 1 more answer
Q2. Unit of Current, , power, indectenc, capecitenc
Add your answer
Q3. Ampiyar, watt, henry, ferd,
Add your answer

Very good test, written examination

Q1. 1)What is DRI?Full form
Ans. 
DRI stands for Direct Reduced Iron, a type of iron produced from the reduction of iron ore.
• DRI is produced by removing oxygen from iron ore without melting it.

• It is used as a substitute for scrap in electric arc furnaces.

• DRI is also used as a feedstock in the production of steel.

• The process of producing DRI is known as the direct reduction process.

• DRI is also known as sponge iron.
Answered by AI
View 1 more answer
Q2. 2)what are the 3 main raw materials in the production of iron and steel?
View 2 more answers
Q3. 3) what is blast furnace? BF gas reaction.
Ans. 
Blast furnace is a type of furnace used for smelting to produce industrial metals. BF gas reaction produces carbon monoxide.
• Blast furnace is used for smelting iron ore into pig iron.

• It is a tall cylindrical structure made of steel and lined with refractory bricks.

• The BF gas reaction produces carbon monoxide, which is used as a fuel in various industries.

• The process involves the reduction of iron ore with coke and limes...read more
Answered by AI
Add your answer
Q4. How many type of iron ore are there in india?
Ans. 
There are several types of iron ore found in India.
• Hematite is the most abundant and widely found iron ore in India.

• Magnetite is another important iron ore found in India.

• Limonite, Siderite, and Iron Pyrites are other types of iron ore found in India.

• India is one of the largest producers of iron ore in the world, with an estimated 2020 production of 206 million metric tons.
Answered by AI
Add your answer
Q5. What is steel? Composition of steel.
Ans. 
Steel is an alloy of iron and carbon, with small amounts of other elements.
• Steel is a widely used material in construction, manufacturing, and transportation industries.

• The carbon content in steel can range from 0.2% to 2.1% by weight.

• Other elements such as manganese, chromium, and nickel are often added to improve the properties of steel.

• Different types of steel are produced by varying the composition and processing m...read more
Answered by AI
Add your answer
Q6. What is the melting point of iron and atomic number?
Ans. 
The melting point of iron is 1538°C and its atomic number is 26.
• Iron has a high melting point of 1538°C.

• Its atomic number is 26, which means it has 26 protons in its nucleus.

• Iron is a transition metal and is commonly used in construction and manufacturing.
Answered by AI
Add your answer
Q7. Explain Heat treatment process.what are the 3 stages of heat treatment process?
Ans. 
Heat treatment is a process of heating and cooling metals to alter their physical and mechanical properties.
• The three stages of heat treatment are heating, soaking, and cooling.

• Heating is done to a specific temperature depending on the metal and desired outcome.

• Soaking is the holding of the metal at the desired temperature for a specific amount of time.

• Cooling can be done rapidly or slowly depending on the desired outc...read more
Answered by AI
Add your answer
Q8. What is the highest temperature in blast furnace? Why is called bf?
Ans. 
The highest temperature in blast furnace is around 2300°F. It is called bf because it is used to produce pig iron.
• The temperature in blast furnace can reach up to 2300°F

• It is called bf because it is used to produce pig iron

• The process involves heating iron ore, coke, and limestone in a furnace

• The coke burns to produce carbon monoxide, which reacts with the iron ore to produce molten iron

• The limestone reacts with impuri
Answered by AI
Add your answer
Q9. What is slag? What fuel is used in blast furnace?
Ans. 
Slag is a byproduct of metal smelting process. Coke is used as fuel in blast furnace.
• Slag is a glass-like byproduct of metal smelting process

• It is formed when impurities in the metal ore combine with flux to form a molten mixture

• The mixture is then cooled and solidified to form slag

• Coke, a form of coal, is used as fuel in blast furnace to produce high temperatures needed for smelting

• Coke burns with a high intensity and...read more
Answered by AI
Add your answer
Q10. What is tempering, explain some purpose.
Ans. 
Tempering is a heat treatment process used to improve the toughness and ductility of metals.
• Tempering involves heating a metal to a specific temperature and then cooling it down slowly.

• The purpose of tempering is to reduce the brittleness of the metal and increase its toughness and ductility.

• Tempering is often used after a metal has been hardened to make it more workable.

• Examples of metals that are commonly tempered in
Answered by AI
Add your answer

Basic math and reasoning questions

Q1. About CAD what is type of drawing and command use off machine design
Add your answer
Q2. About your self and family
Add your answer
Q3. About your education and quality
Add your answer

Q1. Tell me about yourself.
Add your answer

Q1. What are your salary expectations?
Add your answer

Q1. What is your family background?
Add your answer