Filter interviews by
An inflatable gasket is a flexible sealing device that can be inflated to create a tight seal between two surfaces.
An inflatable gasket is typically made of a flexible material such as rubber or silicone.
It is designed to fit between two surfaces, such as a pipe and a flange, to prevent leakage.
When inflated, the gasket expands and fills any gaps or irregularities in the surfaces, creating a tight seal.
Inflatable gaske...
FBE process parameters include temperature, humidity, coating thickness, and curing time.
Temperature should be maintained between 200-250°C
Humidity should be less than 85%
Coating thickness should be 250-500 microns
Curing time should be at least 30 minutes
Other parameters include surface preparation, blasting, and preheating
Pre-heaters are used to heat up a substance before it enters the main processing unit.
Pre-heaters are used in various industries such as chemical, food, and pharmaceuticals.
They help in reducing the energy required for the main processing unit.
Pre-heaters can be of different types such as plate heat exchangers, shell and tube heat exchangers, and fluidized bed heat exchangers.
They can be used for heating up liquids, ga...
I applied via Naukri.com and was interviewed before May 2020. There were 3 interview rounds.
Problems in production can be tackled through proper planning, communication, and problem-solving skills.
Identify the problem and its root cause
Communicate with the team and stakeholders
Develop a plan to address the problem
Implement the plan and monitor progress
Evaluate the effectiveness of the solution and make adjustments if necessary
I applied via Company Website and was interviewed in Sep 2021. There was 1 interview round.
pH is a measure of acidity or alkalinity in a solution. It ranges from 0 to 14, with 7 being neutral.
pH stands for 'potential of hydrogen'
It is a logarithmic scale that measures the concentration of hydrogen ions in a solution
A pH value below 7 indicates acidity, while a value above 7 indicates alkalinity
Pure water has a pH of 7, which is considered neutral
Examples of pH ranges: stomach acid (1.5-3.5), lemon juice (2-3
Molarity is a measure of the concentration of a solute in a solution.
Molarity is defined as the number of moles of solute per liter of solution.
It is denoted by the symbol 'M'.
Molarity can be calculated using the formula: Molarity (M) = moles of solute / volume of solution (in liters).
For example, if 0.5 moles of solute are dissolved in 1 liter of solution, the molarity would be 0.5 M.
A solution is a means of solving a problem or addressing a challenge.
A solution is a specific action or set of actions that can be taken to resolve a problem.
It involves identifying the problem, analyzing it, and implementing a plan to overcome it.
Solutions can vary depending on the context and nature of the problem.
For example, in production, a solution could be implementing a more efficient manufacturing process or i
Oxidation is a chemical process in which a substance loses electrons, resulting in an increase in its oxidation state.
Oxidation involves the transfer of electrons from one substance to another.
It often involves the addition of oxygen or the removal of hydrogen.
Common examples of oxidation include rusting of iron and burning of fuel.
Oxidation reactions are important in various industrial processes, such as the productio...
A strong acid is a chemical compound that completely dissociates into ions in an aqueous solution.
Strong acids have a low pH value and are highly corrosive.
They can react vigorously with other substances and can cause burns.
Examples of strong acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), and nitric acid (HNO3).
Boiling point is the temperature at which a substance changes from a liquid to a gas.
Boiling point is a characteristic property of a substance.
It is the temperature at which the vapor pressure of the liquid equals the atmospheric pressure.
Different substances have different boiling points.
Water boils at 100 degrees Celsius (212 degrees Fahrenheit) at sea level.
I applied via Naukri.com and was interviewed in Apr 2022. There were 2 interview rounds.
Its basic chemistry related question and some basic engineering question
Easy to crack
Pump converts mechanical energy into fluid energy while motor converts electrical energy into mechanical energy. Tube is thin and flexible while pipe is thick and rigid.
Pump is used to transfer fluids from one place to another while motor is used to rotate machinery.
Pump converts mechanical energy into fluid energy while motor converts electrical energy into mechanical energy.
Tube is thin and flexible while pipe is thi...
Experience department is a department that focuses on improving customer experience and satisfaction.
The experience department is responsible for creating and implementing strategies to improve customer experience.
They gather feedback from customers and use it to make improvements to products and services.
They work closely with other departments such as marketing, sales, and customer service to ensure a seamless custom...
posted on 22 Mar 2022
I applied via Naukri.com and was interviewed in Feb 2022. There were 2 interview rounds.
It was hard
based on 4 reviews
Rating in categories
Junior Officer
613
salaries
| ₹1.5 L/yr - ₹5 L/yr |
Officer
532
salaries
| ₹1.7 L/yr - ₹6.2 L/yr |
Senior Officer
457
salaries
| ₹2.7 L/yr - ₹8 L/yr |
Executive
238
salaries
| ₹3.8 L/yr - ₹9.2 L/yr |
Research Associate
233
salaries
| ₹2.2 L/yr - ₹7 L/yr |
Cipla
Dr. Reddy's
Lupin
Zydus Lifesciences