20+ Anthelio Healthcare Solutions Interview Questions and Answers

The depth required for IGL gas laying depends on various factors such as soil type, traffic load, and depth of other utilities.

• The depth should be sufficient to prevent damage from external factors such as traffic load and soil type.

• The depth should also be deep enough to avoid interference with other utilities.

• The depth requirement may vary depending on the location and local regulations.

• For example, in Delhi, the minimum depth requirement for IGL gas laying is 1.2 meters.

• Th...read more

W, H, R, P, and V represent different variables or parameters.

• W could represent weight or width

• H could represent height

• R could represent radius

• P could represent pressure

• V could represent volume

Fittings used during charging depend on the type of refrigerant and system design.

• The type of refrigerant and system design determine the fittings used during charging.

• Common fittings include flare, sweat, and quick-connect fittings.

• Flare fittings are commonly used in air conditioning systems.

• Sweat fittings are commonly used in refrigeration systems.

• Quick-connect fittings are commonly used in automotive air conditioning systems.

• Proper fittings must be used to prevent leaks an...read more

Valves are devices used to control the flow of fluids or gases in a system.

• Gate valve: used to start or stop the flow of fluid by lifting or lowering a gate

• Ball valve: uses a rotating ball with a hole to control the flow

• Check valve: allows flow in one direction and prevents backflow

• Globe valve: controls flow by raising or lowering a disc against the flow

• Butterfly valve: uses a disc to control flow by rotating it

QAP, WPS, and DFT are important documents used in inspection engineering.

• QAP stands for Quality Assurance Plan, which outlines the procedures and requirements for ensuring quality in a project or process.

• WPS stands for Welding Procedure Specification, which provides detailed instructions for performing welding operations.

• DFT stands for Dry Film Thickness, which refers to the thickness of a coating or paint applied to a surface.

• QAP ensures that quality standards are met throug...read more

Data required for fire & safety

• Building layout and floor plans

• Location of fire exits and emergency equipment

• Fire suppression systems and equipment

• Fire alarm and detection systems

• Emergency response plan and procedures

Types of pipes include steel, copper, PVC; WPS stands for Welding Procedure Specification; A53 is for low pressure, A106 is for high pressure; Hydrotest uses water, pneumatic test uses air; NDT is Non-Destructive Testing; JSA is Job Safety Analysis.

• Types of pipes: steel, copper, PVC

• WPS: Welding Procedure Specification

• Difference between A53 and A106: A53 for low pressure, A106 for high pressure

• Process of hydrotest: uses water to test for leaks

• Process of pneumatic test: uses ai...read more

Loading, unloading weight quantity, and quality are important factors in ensuring product integrity.

• Loading and unloading processes should be carefully monitored to prevent damage to the products.

• Weight verification should be conducted to ensure accurate quantity of goods.

• Quality checks should be performed to ensure that the products meet the required standards.

• Examples: using weighing scales to measure the weight of goods, inspecting the condition of products during loading ...read more

For GC Ms, check for leaks, column contamination, and detector issues. For UV spectroscopy, check for lamp and cell issues.

• For GC Ms, check for leaks in the system and ensure that the column is not contaminated. Also, check for detector issues such as a dirty or faulty detector.

• For UV spectroscopy, check for lamp issues such as a burnt-out lamp or incorrect wavelength settings. Also, check for cell issues such as air bubbles or scratches on the cell.

• Regular maintenance and ca...read more

Valves are mechanical devices used to control the flow of fluids within a system. They can be classified into different types based on their design and function.

• Gate valves: used to fully open or close the flow of fluid

• Ball valves: have a spherical closure element to control flow

• Check valves: allow flow in one direction only to prevent backflow

• Butterfly valves: have a disc that rotates to control flow

• Pressure relief valves: release excess pressure to prevent damage

• Globe valve...read more

I have 5 years of experience in the testing industry.

• 5 years of experience in testing industry

• Proficient in manual and automated testing

• Experience with various testing tools and methodologies

• Strong understanding of software development lifecycle

• Worked on testing projects for different industries

Maximise budgeted sales volume by optimizing marketing strategies, improving sales team performance, and identifying new market opportunities.

• Optimize marketing strategies to reach target audience effectively

• Improve sales team performance through training and motivation

• Identify new market opportunities for potential growth

• Analyze sales data to understand customer behavior and preferences

• Offer promotions or discounts to attract more customers

• Collaborate with other departments ...read more

WPS stands for Welding Procedure Specification and PQR stands for Procedure Qualification Record.

• WPS is a document that provides detailed welding instructions and parameters for a specific welding job.

• PQR is a record of the welding parameters used during the qualification of a welding procedure.

• WPS and PQR are essential documents in the welding industry to ensure quality and consistency in welding processes.

Wet process can lead to contamination and inconsistent results.

• Wet process involves the use of water and other liquids which can introduce contaminants.

• The process can also be affected by variations in temperature and humidity.

• Examples of wet processes include washing, precipitation, and filtration.

• To mitigate these issues, strict quality control measures must be in place.

• Regular testing and monitoring can help ensure consistent and reliable results.

Work at height refers to any work that takes place above ground level where a person could fall and injure themselves.

• Work at height includes activities such as working on roofs, scaffolding, ladders, or elevated platforms.

• Safety measures such as fall protection equipment and guardrails should be used when working at height.

• Workers should be trained on proper procedures for working at height to prevent accidents.

• Regular inspections of equipment and work areas should be conduc...read more

NABL lab ISO methods are internationally recognized standards for testing and calibration laboratories.

• NABL stands for National Accreditation Board for Testing and Calibration Laboratories

• ISO methods ensure quality and reliability of testing procedures

• Compliance with ISO methods is essential for accreditation and recognition

• Examples of ISO methods include ISO 17025 for testing laboratories and ISO 15189 for medical laboratories

Defects in welding can compromise the integrity of the joint and lead to structural failures.

• Common welding defects include porosity, lack of fusion, cracks, and undercutting.

• Porosity is caused by gas entrapment during the welding process.

• Lack of fusion occurs when the weld metal fails to fuse with the base metal.

• Cracks can result from excessive stress or improper cooling of the weld.

• Undercutting is a groove formation along the weld toe, weakening the joint.

• Proper inspection ...read more

The tolerance of UT test refers to the acceptable range of error in the test results.

• Tolerance is typically specified in the testing standards or procedures.

• It is important to ensure that the equipment used for UT testing is calibrated within the specified tolerance limits.

• Deviation from the tolerance range may indicate a need for retesting or further investigation.

• Examples of tolerance limits for UT testing may include +/- 1mm for wall thickness measurements.

Method food analysis involves using various techniques to analyze the composition and quality of food products.

• Method food analysis includes techniques such as chromatography, spectroscopy, and microbiological testing.

• It helps in determining the nutritional content, presence of contaminants, and overall quality of food products.

• Examples of method food analysis include testing for pesticide residues in fruits and vegetables, determining the fat content in dairy products, and i...read more