i
Incheon Motors
Filter interviews by
Clear (1)
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, and inversely proportional to the resistance of the conductor.
Ohm's law is represented by the formula V = I * R, where V is voltage, I is current, and R is resistance.
It helps in understanding the relationship between voltage, current, and resistance in an electrical circuit.
For example, if the voltage acros...
3-phase refers to a type of electrical power transmission system that uses three wires to carry alternating current.
3-phase power systems have three conductors carrying three alternating currents that reach their peak values at different times.
It is commonly used in industrial and commercial settings for its efficiency and ability to power large motors.
Examples of 3-phase equipment include air compressors, pumps, and l
Single phase motors typically have two windings - a main winding and an auxiliary winding.
Single phase motors usually have two windings - a main winding and an auxiliary winding
The main winding is responsible for generating the magnetic field that drives the motor
The auxiliary winding is used to create a phase shift to start the motor
Some single phase motors may have additional windings for specific purposes
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Consists of two or more coils of insulated wire wrapped around a core
Primary coil receives electrical energy and induces a magnetic field in the core
Secondary coil receives the magnetic field and converts it back into electrical energy
Used to step up or step down voltage levels in electr
To run a DG, start by checking fuel levels, turning on the ignition switch, and monitoring the engine for any issues.
Check fuel levels before starting the DG.
Turn on the ignition switch to start the DG.
Monitor the engine for any issues or abnormalities.
Regularly maintain and service the DG to ensure proper functioning.
Follow safety protocols and guidelines while operating the DG.
Top trending discussions
I grew up in a small town, went to college, and pursued a career in tech.
Born and raised in a small town
Attended college and earned a degree in Computer Science
Started working in tech as a software engineer
Moved to a big city for better job opportunities
Continued to advance my career and gain new skills
Heat transfer occurs through conduction, convection, and radiation.
Conduction is the transfer of heat through a material without any movement of the material itself.
Convection is the transfer of heat through the movement of fluids or gases.
Radiation is the transfer of heat through electromagnetic waves.
Examples include touching a hot stove (conduction), boiling water (convection), and feeling the warmth of the sun (rad
Reduce risk of global warming from R12 in air-conditioners
Use alternative refrigerants like R134a or R290
Ensure proper disposal of old refrigerants
Regular maintenance and leak detection to prevent emissions
Encourage energy-efficient ACs to reduce overall emissions
Promote use of natural refrigerants like CO2 or ammonia
Implement regulations and policies to phase out harmful refrigerants
Invest in research and development
The Simplex method is used to solve linear programming problems with multiple variables and constraints.
Used in optimization problems
Used to find the optimal solution
Used when there are multiple variables and constraints
Examples include production planning and resource allocation
Artificial Intelligence (AI) sector is expected to boom in the next five years.
AI is being integrated into various industries such as healthcare, finance, and transportation.
The global AI market is expected to reach $267 billion by 2027.
AI is being used for predictive analytics, natural language processing, and image recognition.
Companies such as Google, Amazon, and Microsoft are investing heavily in AI research and de
I applied via Campus Placement and was interviewed before Apr 2017. There were 3 interview rounds.
Yes, I am ready to work in any department or group at TOYOTA.
I am adaptable and willing to learn new skills.
I have experience working in various departments in my previous roles.
I believe in the importance of cross-functional collaboration for overall success.
I am excited about the opportunity to gain a diverse range of experiences at TOYOTA.
I prefer this company because of its strong commitment to employee development and innovative approach to education.
Strong commitment to employee development through training programs
Innovative approach to education with cutting-edge technology
Positive company culture that values collaboration and growth opportunities
TSB stands for Technical Service Bulletin.
TSB is a document issued by a manufacturer to provide information and instructions regarding a specific technical issue or problem.
It is typically distributed to technicians and service centers to help them diagnose and repair the issue.
TSBs often include step-by-step instructions, diagrams, and recommended solutions.
They can cover a wide range of topics, such as software updat...
BS4 and BS6 are emission norms for vehicles, with BS6 being more stringent and environmentally friendly.
BS4 stands for Bharat Stage 4 and BS6 stands for Bharat Stage 6.
BS4 emission norms were implemented in India in 2017, while BS6 norms were implemented in 2020.
BS6 vehicles emit lower levels of harmful pollutants like nitrogen oxides and particulate matter compared to BS4 vehicles.
BS6 compliant vehicles require the us...
The engine works by converting fuel into energy through combustion, which powers the pistons and turns the crankshaft.
Fuel is mixed with air and ignited in the combustion chamber
The resulting explosion pushes the piston down, which turns the crankshaft
The crankshaft converts the linear motion of the piston into rotational motion
The rotational motion is transferred to the wheels through the transmission
Examples of engin
posted on 24 Jun 2021
I applied via Walk-in and was interviewed before Jun 2020. There were 3 interview rounds.
I applied via Company Website and was interviewed in May 2022. There were 2 interview rounds.
Punches are used to create holes in materials. There are different types of punches and angles, including center punch, prick punch, and dot punch.
Center punch is used to mark the center of a hole to be drilled
Prick punch is used to mark a point on a surface
Dot punch is used to create a small indentation on a surface
Punch angles can vary depending on the material being punched and the desired outcome
Different types of hammers are used for different purposes. Ballpen hammers are used for delicate work while claw hammers are used for heavy-duty work.
Ballpen hammers have a small head and are used for delicate work like driving small nails or pins.
Claw hammers have a larger head and a claw on the opposite side for removing nails.
Sledgehammers are used for heavy-duty work like breaking concrete or driving stakes.
Mallet...
I applied via Campus Placement and was interviewed in Jun 2023. There were 2 interview rounds.
Vernier Kelly Park is a public park located in the city. It offers various recreational activities and amenities for visitors.
Vernier Kelly Park is a public park
Located in the city
Offers recreational activities and amenities
Open to visitors
I am from New York City, a bustling metropolis known for its diverse culture and iconic landmarks.
I am from New York City
It is a bustling metropolis
Known for its diverse culture
Famous for its iconic landmarks like the Statue of Liberty and Times Square
Yes, I am willing to work overtime.
I am flexible and committed to completing tasks on time.
I understand the importance of meeting deadlines and am willing to put in extra hours if necessary.
I have previous experience working overtime and have successfully completed projects under tight deadlines.
I applied via Walk-in and was interviewed in Mar 2022. There was 1 interview round.
I applied via Referral and was interviewed in Jan 2024. There were 2 interview rounds.
Case study with two technician problems solve sort time
based on 1 interview
Interview experience
based on 3 reviews
Rating in categories
Team Lead
7
salaries
| ₹3.5 L/yr - ₹4.5 L/yr |
Back Office Staff
6
salaries
| ₹2 L/yr - ₹2 L/yr |
HR Executive
5
salaries
| ₹1.7 L/yr - ₹2.5 L/yr |
Automobile Technician
5
salaries
| ₹0.2 L/yr - ₹2.2 L/yr |
Bodyshop Advisor
4
salaries
| ₹1.4 L/yr - ₹3 L/yr |
Maruti Suzuki
Hyundai Motor India Limited
Tata Motors
Mahindra & Mahindra