Add office photos
Filter interviews by
Inch Energy Electrical Designer Interview Questions, Process, and Tips
Inch Energy Electrical Designer Interview Experiences
1 interview found
Interview Questionnaire
7 Questions
- Q1. 1.Command of shifting a drawing from one window to another?
- Ans.
To shift a drawing from one window to another, use the MOVE command.
Type MOVE in the command line
Select the drawing to be moved
Specify the base point of the drawing
Select the destination window
Specify the insertion point in the destination window
- Q2. 2.How creat a block? Proceasure of block editing?
- Ans.
To create a block in electrical design, follow these steps for block editing.
Open the schematic editor and draw the desired shape for the block
Select the shape and right-click to access the 'Create Block' option
Name the block and add any necessary attributes
Save the block to the library for future use
To edit the block, select it and right-click to access the 'Edit Block' option
Make the desired changes and save the upda
- Q3. Proceasure to make group?
- Ans.
To make a group, identify common interests, invite potential members, establish goals and guidelines, and communicate regularly.
Identify common interests among potential members
Invite potential members to join the group
Establish goals and guidelines for the group
Communicate regularly to ensure everyone is on the same page
- Q4. What is panel?Have you worked in panel layout?
- Ans.
A panel is an enclosure that houses electrical components and controls. Yes, I have worked in panel layout.
Panels are used to protect electrical equipment from damage and to prevent electrical hazards.
Panel layout involves designing the arrangement of components within the panel.
Factors to consider in panel layout include ease of access, cable routing, and heat dissipation.
Examples of components that may be included in...
- Q5. Difference between CB & switchgear?
- Ans.
CB is a device that interrupts the flow of current, while switchgear is a combination of switches, fuses, and circuit breakers used to control and protect electrical equipment.
CB is a single device, while switchgear is a combination of devices.
CB is used to interrupt the flow of current in case of overload or short circuit, while switchgear is used to control and protect electrical equipment.
Switchgear can be used for ...
- Q6. 100 kv SLD on AutoCAD.
- Ans.
Designing a 100 kv Single Line Diagram on AutoCAD.
Create a new drawing in AutoCAD.
Use appropriate symbols for electrical components.
Draw the lines and connect the components to create the SLD.
Label the components and lines with appropriate text.
Ensure the SLD is accurate and meets all necessary standards.
Save and submit the final design.
- Q7. Pcb?
Skills evaluated in this interview
Interview questions from similar companies
Electrical Supervisor Interview Questions & Answers
Adani Green Energy
Anonymous
posted on 24 Feb 2024
Selected
I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.
(2 Questions)
- Q1. 1.Dc system ( pv area) Testing & commissioning and operations maintenance. 2. Inverter operations & maintenance. 3.IDT Testing, operation & maintenance. 4.Bettery bank Maintenance. 5.Reporting purpose. 6.S...
- Q2. Module Rating, Testing, commissioning , cleaning as per sop accordingly
Interview Preparation Tips
- Excellent
Assistant Electrical Engineer Interview Questions & Answers
Noida Power Company
Anonymous
posted on 1 Dec 2023
Selected
I applied via Approached by Company
(1 Question)
- Q1. All questions was depends on data mentioned in resume
(1 Question)
- Q1. During the second round we faced the HoD for technical discussion
Selected
I applied via Walk-in and was interviewed in Jul 2023. There were 6 interview rounds.
(2 Questions)
- Q1. Like what is your work experience. Are you willing to climb twice in a day .
- Ans. According to your experience needs to give answers Second question- yes
- Q2. Are you willing to work if require to support near by site .
(2 Questions)
- Q1. As per your experience as previous company they asked questions, but more focos on safety .
- Q2. What is LOTO , Types of LOTO
- Ans.
LOTO stands for Lockout/Tagout, a safety procedure used to ensure that dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.
LOTO involves locking the energy isolating devices with an assigned individual lock and tag to prevent the machine from being turned on.
Types of LOTO include electrical LOTO, mechanical LOTO, and pneumatic LOTO.
Examples of LOTO ...
(1 Question)
- Q1. Previous experiences questions, like DFIG , Converter system, power factor , transformer , lighting system, Earthing system .
Normal discussion with seniors
(1 Question)
- Q1. Salary discussion and joining details
Interview Preparation Tips
Electrical Engineer Interview Questions & Answers
Dhoot Transmission
Anonymous
posted on 11 Jun 2024
(2 Questions)
- Q1. What is the Transformer
- Ans.
A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
Consists of two coils of wire, known as primary and secondary coils
Primary coil receives electrical energy and creates a magnetic field
Magnetic field induces a voltage in the secondary coil, transferring energy
Used in power distribution, voltage regulation, and electrical isolation
- Q2. Electrical 8 equipment
Interview Preparation Tips
It was very easy ,duration 45 min for 30 questions
(2 Questions)
- Q1. It was of moderate level 2-3 questions
- Q2. What is your name
Interview Preparation Tips
Selected
I was interviewed in Dec 2023.
(1 Question)
- Q1. All electrical panel HT <
Interview Preparation Tips
Selected
I was interviewed in Apr 2023.
(5 Questions)
- Q1. Electrical based
- Q2. Floor maintenance equipments
- Q3. Critical questions
- Q4. Ups , pac , rodents, wld , FHC , MCP , FAS
- Q5. FM 2000 , Battery, All panel realated
Interview Preparation Tips
- Electricals
Selected
I applied via Company Website and was interviewed in Feb 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Personal information,
- Q2. Current Job, Current CTC
(5 Questions)
- Q1. Current company working profile
- Q2. Electrical questions ,
- Q3. Power generation , Motors
- Q4. Wind turbine, sub station equipment
- Q5. Circuit breakers, CT, PT
Interview Preparation Tips
Electrical Site Engineer Interview Questions & Answers
Utility Powertech
Anonymous
posted on 3 Nov 2022
(5 Questions)
- Q1. 1.cable tery type. 2. Test perfom at C.T 3. HT and LT bracker 4.SeF Ref protection
- Q2. Type of cable tray and their saport
- Ans.
Different types of cable trays include ladder, perforated, solid bottom, wire mesh, and trough.
Ladder cable trays have horizontal cross members resembling a ladder.
Perforated cable trays have small holes for ventilation and drainage.
Solid bottom cable trays have a solid base for supporting cables.
Wire mesh cable trays have a grid-like structure for easy cable installation.
Trough cable trays have a U-shaped design for c
- Q3. Rule of cable laying.
- Ans.
The rule of cable laying involves proper planning, routing, securing, and labeling of cables to ensure safety and efficiency.
Plan the cable routes to avoid interference with other systems or equipment.
Secure cables properly to prevent damage or accidents.
Label cables clearly for easy identification and maintenance.
Follow local regulations and standards for cable laying practices.
Consider factors like cable length, bend...
- Q4. What is anty carosan pest
- Ans.
Anticarsia gemmatalis, also known as the velvetbean caterpillar, is a common pest in agriculture.
Anticarsia gemmatalis is a species of moth in the family Erebidae.
It is a major pest of soybean crops, feeding on the leaves and causing significant damage.
Control measures for velvetbean caterpillars include biological control agents, insecticides, and crop rotation.
Monitoring for early signs of infestation can help preven
- Q5. Tell about GA drawings
- Ans.
General Arrangement drawings show the overall layout of electrical systems in a building or structure.
GA drawings provide an overview of the entire electrical system layout
They include details such as equipment locations, cable routing, and connection points
These drawings are essential for understanding the overall design and installation of electrical systems
Examples of GA drawings include floor plans with electrical ...
Interview Preparation Tips
Joint venture
Inch Energy Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Electrical Design Engineer Interview Questions
- Electrical Engineer Interview Questions
- Electrical Technician Interview Questions
- Electrical Supervisor Interview Questions
- Electrical Maintenance Engineer Interview Questions
- Electrical GET Interview Questions
- Diploma Electrical Engineer Interview Questions
- Senior Electrical Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
Inch Energy Electrical Designer Reviews and Ratings
based on 1 review
Rating in categories
|
Techno Commercial Engineer
7
salaries
|  ₹2 L/yr - ₹4.3 L/yr |
|
Engineer
3
salaries
| ₹2 L/yr - ₹3.3 L/yr |
Vestas
ReNew
Siemens Gamesa Renewable Power Private Limited
Adani Green Energy
Calculate your in-hand salary
- Home >
- Interviews >
- Inch Energy Interview Questions >
- Inch Energy Electrical Designer Interview Questions
