HYT Engineering Site Supervisor Interview Questions and Answers

Q1. Basic question information self
Add your answer

General aptitude teat and mechanical engineering technical question paper

Q1. Previous experience and technical knowledge basic concepts
Add your answer

Q1. Current company products and handling qualifications
Add your answer

Basics of engineering, like manufacturing , SOM, MD,

Q1. What is the difference between lathe and milling machine?
Ans. 
Lathe is used for cylindrical workpieces while milling machine is used for flat or irregularly shaped workpieces.
• Lathe rotates the workpiece while the cutting tool remains stationary, while milling machine rotates the cutting tool while the workpiece remains stationary.

• Lathe is used for turning, drilling, and boring operations, while milling machine is used for cutting, drilling, and shaping operations.

• Lathe is ideal f...read more
Answered by AI
View 7 more answers
Q2. How to calculate maximum load can take by lathe?
Ans. 
The maximum load a lathe can take depends on its capacity and the material being machined.
• Check the lathe's specifications for its maximum weight capacity

• Consider the material being machined and its density

• Calculate the cutting forces involved in the machining process

• Ensure the lathe is properly maintained and in good working condition
Answered by AI
Add your answer
Q3. Basic GD&T questions?
Add your answer
Q4. Why holes in disc of the bike?
Ans. 
Holes in the disc of a bike are for cooling and to prevent overheating.
• Holes allow air to flow through the disc, cooling it down.

• Prevents overheating and warping of the disc.

• Improves braking performance and reduces brake fade.

• Commonly found on high-performance bikes and in racing.

• Different hole patterns can affect noise and vibration levels.
Answered by AI
View 1 more answer

Q1. Why should we hire you?
Ans. 
I have a strong background in design engineering and a proven track record of successfully completing projects.
• I have a Bachelor's degree in Mechanical Engineering and 5 years of experience in design engineering.

• I have a deep understanding of CAD software and have successfully designed and developed multiple products using it.

• I am highly skilled in problem-solving and have a keen eye for detail, ensuring high-quality d...read more
Answered by AI
View 1 more answer
Q2. Where do you see yourself in 5 years?
Ans. 
In 5 years, I see myself as a senior design engineer leading a team of talented engineers and working on innovative projects.
• Leading a team of engineers

• Working on innovative projects

• Continuing professional development

• Contributing to the growth of the company
Answered by AI
Add your answer
Q3. What are your strengths and weaknesses?
Ans. 
My strengths include problem-solving, attention to detail, and creativity. My weaknesses include time management and public speaking.
• Strengths: Problem-solving - I enjoy analyzing complex problems and finding innovative solutions.

• Strengths: Attention to detail - I have a meticulous eye for detail, ensuring accuracy in my designs.

• Strengths: Creativity - I have a strong ability to think outside the box and come up with u...read more
Answered by AI
Add your answer
Q4. Tell me about yourself.
Ans. 
I am a design engineer with a passion for creating innovative solutions.
• I have a Bachelor's degree in Mechanical Engineering.

• I have 5 years of experience in designing and developing products.

• I am proficient in CAD software such as SolidWorks and AutoCAD.

• I have successfully led a team in designing a new product that increased efficiency by 20%.

• I am constantly seeking new ways to improve designs and stay updated with the
Answered by AI
Add your answer

Q1. GD and T aplication in fixture design
Ans. 
GD&T (Geometric Dimensioning and Tolerancing) is commonly used in fixture design to ensure accurate and precise manufacturing processes.
• GD&T helps define the allowable variations in the dimensions and geometric features of a part, which is crucial in fixture design.

• Fixtures are designed to hold and position workpieces during manufacturing processes, and GD&T ensures that the fixtures are capable of achieving the requir...read more
Answered by AI
Add your answer
Q2. 321 principle for fixture design
Ans. 
The 321 principle is a guideline for fixture design that ensures proper alignment and stability.
• The 3 points refer to the minimum number of contact points required for stability.

• The 2 points refer to the minimum number of planes required for alignment.

• The 1 point refers to the minimum number of degrees of freedom allowed for the part being fixed.

• For example, a fixture for holding a cylindrical object may have three con...read more
Answered by AI
Add your answer

Q1. Technical motor ball screws
Add your answer
Q2. Technical basic and sheet metal and Moro’s selection
Add your answer

Q1. What means the General tolerances
Ans. 
General tolerances refer to the acceptable range of variation in dimensions or properties of a part or product.
• General tolerances are typically specified in engineering drawings to ensure parts fit and function properly.

• They are usually expressed as a range of acceptable values, such as +/- 0.1mm.

• Tolerances can vary depending on the specific requirements of the part or product.

• Examples of general tolerances include dim...read more
Answered by AI
Add your answer
Q2. What is the material for wheel, Pin
Ans. 
The material for wheel is typically rubber or plastic, while the material for pin is usually metal such as steel or aluminum.
• Wheel material is commonly rubber or plastic for flexibility and durability

• Pin material is usually metal like steel or aluminum for strength and stability
Answered by AI
Add your answer
Q3. What are the grades of Hardwares like Screw, nut washer
Ans. 
Hardware grades are typically classified based on material composition, strength, and corrosion resistance.
• Hardware grades are often denoted by a combination of letters and numbers, such as Grade 8.8 or Grade 316.

• Higher grade numbers generally indicate a higher tensile strength or corrosion resistance.

• Common grades for screws include Grade 2, Grade 5, and Grade 8, with Grade 8 being the strongest.

• For nuts and washers, ...read more
Answered by AI
Add your answer
Q4. How to calculate motor power
Ans. 
Motor power can be calculated using the formula: Power (W) = Torque (Nm) x Speed (RPM) / 9.548
• Calculate the torque required for the application

• Determine the speed at which the motor will operate

• Use the formula Power (W) = Torque (Nm) x Speed (RPM) / 9.548 to calculate motor power
Answered by AI
Add your answer
Q5. How welds are considered
Ans. 
Welds are critical in design engineering for joining metal components together.
• Welds must be strong enough to withstand the intended load and stress.

• Proper welding techniques and materials must be used to ensure the integrity of the weld.

• Inspections and testing should be conducted to verify the quality of the weld.

• Consideration should be given to factors such as joint design, welding process, and material compatibility...read more
Answered by AI
Add your answer

Q1. Tool test of part drawing in software
Ans. 
Tool test of part drawing in software is a process to ensure accuracy and functionality of the software.
• Tool test involves checking the software's ability to read and interpret part drawings

• It ensures that the software can accurately generate tool paths based on the part drawing

• Examples of software used for tool test include SolidWorks, AutoCAD, and CATIA
Answered by AI
Add your answer

Q1. Technical discussion with the manager Why m joing this firm all
Ans. The working conditions and better
Answered Anonymously
Add your answer

Q1. What are your salary expectations?
Add your answer
Q2. Why should we hire you?
Add your answer
Q3. Share details of your previous job.
Add your answer
Q4. Why are you looking for a change?
Add your answer
Q5. What are your strengths and weaknesses?
Add your answer
Q6. Tell me about yourself.
Add your answer

Q1. Technical tool test on Nx or Catia
Add your answer

Q1. Tell about personal and some design related technical question
Add your answer
Q2. Type of clamp and locator Type of checking fixture
Ans. 
The type of clamp and locator used in a checking fixture depends on the specific application and requirements.
• The clamp and locator should be chosen based on the part being checked and the desired level of accuracy.

• Common types of clamps include toggle clamps, pneumatic clamps, and hydraulic clamps.

• Locators can be pins, blocks, or other features that ensure proper positioning of the part.

• The checking fixture may also i...read more
Answered by AI
Add your answer

Q1. Personal interrogation
Add your answer