Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by HI-FAB Engineers Team. If you also belong to the team, you can get access from here

HI-FAB Engineers Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

HI-FAB Engineers Mechanical Engineer Interview Questions and Answers

Updated 17 Mar 2021

HI-FAB Engineers Mechanical Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed in Feb 2021. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Regarding Rotating Equipment
  • Q2. Such as equipment parameters
  • Q3. Equipment installation commissioning, trobleasot
  • Q4. How to mechanical seal installation, asembly, disassembly,
  • Ans. 

    Mechanical seal installation, assembly, and disassembly require proper tools and techniques to ensure a leak-free operation.

    • Choose the right type of mechanical seal for the application

    • Clean and inspect all components before installation

    • Use a proper lubricant to prevent damage during assembly

    • Tighten bolts in a criss-cross pattern to ensure even pressure

    • Follow manufacturer's instructions for disassembly and reassembly

    • Ins...

  • Answered by AI
  • Q5. Failures inspection of all rotating / statics equipment
  • Ans. 

    Inspection of rotating/static equipment failures

    • Perform regular inspections to identify potential failures

    • Use non-destructive testing methods to detect cracks or defects

    • Check for proper lubrication and alignment

    • Monitor vibration levels to detect abnormalities

    • Inspect electrical components for signs of wear or damage

    • Keep detailed records of inspections and maintenance

    • Address any identified issues promptly to prevent furt

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - ..

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. About last job
  • Ans. Did execution and quality control jobs of hot work and equipment.
  • Answered Anonymously

I applied via Company Website and was interviewed in Sep 2021. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. 1. What is ohm's Law
  • Ans. 

    Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to its resistance.

    • Ohm's Law is expressed as V = IR, where V is the voltage, I is the current, and R is the resistance.

    • It helps in understanding the relationship between voltage, current, and resistance in an electrical circuit.

    • For example, if the voltage is increased while t...

  • Answered by AI
  • Q2. What is Linux Os
  • Ans. 

    Linux OS is an open-source operating system based on the Unix kernel.

    • Linux OS is known for its stability, security, and flexibility.

    • It is widely used in servers, embedded systems, and mobile devices.

    • Examples of popular Linux distributions include Ubuntu, Fedora, and CentOS.

  • Answered by AI
  • Q3. Full form of CCD/TI Camera
  • Ans. 

    CCD stands for Charge-Coupled Device and TI Camera stands for Texas Instruments Camera.

    • CCD is a type of image sensor used in digital cameras and video cameras.

    • TI Camera refers to cameras developed by Texas Instruments, a technology company.

    • CCD/TI Cameras are commonly used in various applications such as surveillance, photography, and scientific imaging.

    • CCD/TI Cameras convert light into electrical signals for capturing ...

  • Answered by AI
  • Q4. Whic command use for make directory in Linux system
  • Ans. 

    The command used to make a directory in Linux is 'mkdir'.

    • The 'mkdir' command is used to create a new directory in Linux.

    • It can be used with various options to set permissions, create multiple directories, etc.

    • For example, 'mkdir directory_name' creates a new directory with the specified name.

    • To create multiple directories at once, use 'mkdir dir1 dir2 dir3'.

    • To create directories with specific permissions, use 'mkdir -m

  • Answered by AI
  • Q5. Which Service use for local server in parrot os
  • Ans. 

    The service used for local server in Parrot OS is Apache.

    • Apache is a popular open-source web server software.

    • It is widely used for hosting websites and serving web content.

    • Apache provides a robust and secure environment for running web applications.

    • It supports various features like virtual hosting, SSL/TLS encryption, and URL rewriting.

    • Parrot OS includes Apache as the default web server for local development.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Practice and repeat,be on time,

Skills evaluated in this interview

I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Previous company work experience
  • Q2. Plans in next 5 years
  • Ans. 

    I plan to continue developing my technical skills and taking on leadership roles within the company.

    • Pursue advanced technical certifications

    • Lead cross-functional teams on complex projects

    • Mentor junior engineers

    • Explore opportunities for innovation and process improvement

    • Collaborate with senior management to set strategic goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was ok. But the local management is horrible. Don't join expecting MNC standard.Even a startup might be better than this company. It's a family owned business by the manager. Not MNC
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. What is the method for calculating the circumference of a circle using a measuring tape?
  • Ans. 

    To calculate the circumference of a circle, measure its diameter with a tape and multiply by π (pi).

    • Use a flexible measuring tape to measure the diameter of the circle directly across its center.

    • Ensure the tape is straight and not sagging for an accurate measurement.

    • Once you have the diameter (d), use the formula: Circumference (C) = π × d.

    • For example, if the diameter is 10 cm, then C = π × 10 cm ≈ 31.42 cm.

    • Alternative...

  • Answered by AI
  • Q2. What is the conversion factor from inches to millimeters?

Interview Questionnaire 

2 Questions

  • Q1. How many types of gears?
  • Ans. 

    There are several types of gears, including spur, helical, bevel, worm, rack and pinion, and planetary gears.

    • Spur gears have straight teeth and are the most common type.

    • Helical gears have angled teeth and produce less noise and vibration than spur gears.

    • Bevel gears are used to transmit power between shafts that are at an angle to each other.

    • Worm gears are used to transmit power at a right angle and have high gear ratio...

  • Answered by AI
  • Q2.  I said 5 types of gears
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. General discussion of your work history
Round 3 - Technical 

(1 Question)

  • Q1. Stream technical question
Round 4 - Assignment 

General work related assignment

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare of your work related technical question.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is QA and QC
  • Ans. 

    QA stands for Quality Assurance and involves processes to prevent defects, while QC stands for Quality Control and involves processes to identify defects.

    • QA focuses on preventing defects in the product or service being delivered

    • QC focuses on identifying defects in the product or service being delivered

    • QA involves processes such as reviews, audits, and process improvements

    • QC involves processes such as testing, inspectio...

  • Answered by AI
  • Q2. Welding details

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic Preparations only , not to try extra
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Solving questions paper

Round 2 - Assignment 

CAD &Solid work test

Round 3 - HR 

(2 Questions)

  • Q1. Project Handling experience
  • Q2. Salary negotiation

I applied via Recruitment Consultant and was interviewed in Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Why you want to change your current company

Interview Preparation Tips

Interview preparation tips for other job seekers - Be practical.. tell the genuine Reason

HI-FAB Engineers Interview FAQs

What are the top questions asked in HI-FAB Engineers Mechanical Engineer interview?

Some of the top questions asked at the HI-FAB Engineers Mechanical Engineer interview -

  1. How to mechanical seal installation, asembly, disassembl...read more
  2. Failures inspection of all rotating / statics equipme...read more
  3. Equipment installation commissioning, troblea...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Concentric Interview Questions
3.8
 • 36 Interviews
Europa Locks Interview Questions
3.6
 • 20 Interviews
PMT Machines Interview Questions
3.3
 • 19 Interviews
Trelleborg Interview Questions
3.9
 • 18 Interviews
MITA Interview Questions
3.7
 • 14 Interviews
View all
Engineer- Customer Support
8 salaries
unlock blur

₹2.4 L/yr - ₹4.5 L/yr

Production Engineer
8 salaries
unlock blur

₹3 L/yr - ₹4.5 L/yr

Design Engineer
7 salaries
unlock blur

₹4 L/yr - ₹5 L/yr

Service Engineer
6 salaries
unlock blur

₹3.2 L/yr - ₹5.5 L/yr

CNC Programmer cum Setter
5 salaries
unlock blur

₹2.1 L/yr - ₹4 L/yr

Explore more salaries
Compare HI-FAB Engineers with

Europa Locks

3.6
Compare

Trelleborg

3.9
Compare

Case New-Holland Construction Equipment India

4.0
Compare

Tokai Rubber Auto Parts India

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview