Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by HEG Team. If you also belong to the team, you can get access from here

HEG Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

HEG Mechanical Maintenance Engineer Interview Questions and Answers

Updated 17 Nov 2021

HEG Mechanical Maintenance Engineer Interview Experiences

1 interview found

I applied via campus placement at Rajiv Gandhi Proudyogiki Vishwavidyalaya (RGPV), Bhopal and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Types of engines , d/f b/w diesel engine and petrol engine , 2stroke 4 stroke
  • Q2. Some questions on your favourite subject

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical interview will be little bit difficult so well prepared from your favourite subject.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. WHAT COVERS YOUR INTEREST IN MOLEX AND PRODUCTS
  • Ans. 

    I am interested in Molex and its products because of their innovative technology and impact on various industries.

    • Innovative technology used in Molex products

    • Impact of Molex products on various industries

    • Opportunities for growth and learning at Molex

    • Strong reputation and history of success

  • Answered by AI
  • Q2. SUBJECTS RELATED TO MOLDING AND CAST PRODUCTS

Interview Preparation Tips

Interview preparation tips for other job seekers - LEARN INJECTION MOLDING AND HAZARDOUS SUBSTANCES FROM RGW PYE
ANSWER QUESTIONS SHORTLY AND LEARN MORE ABOUT first use PLASTICS
SOLIDWORKS MOLD DESIGN - fair idea is sufficient
material number knowledge necessary
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

3 rounds with basic electronics and digital electronics questions

Round 2 - Technical 

(2 Questions)

  • Q1. Wht is bjt wht is tht and all simple simple
  • Ans. 

    BJT stands for Bipolar Junction Transistor. It is a three-layer semiconductor device used for amplification and switching.

    • BJT is a type of transistor that consists of three layers of semiconductor material.

    • It is commonly used in electronic circuits for amplification and switching purposes.

    • There are two types of BJT: NPN (Negative-Positive-Negative) and PNP (Positive-Negative-Positive).

    • BJTs have three terminals: the emi...

  • Answered by AI
  • Q2. Super introductionto iot andwomen
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Preparation of embedded
  • Ans. 

    Preparation of embedded systems involves designing and integrating hardware and software components for specific applications.

    • Identify the requirements and constraints of the embedded system

    • Select appropriate hardware components such as microcontrollers, sensors, and actuators

    • Design the software architecture including real-time operating systems and communication protocols

    • Integrate hardware and software components to m...

  • Answered by AI

Skills evaluated in this interview

I applied via Campus Placement and was interviewed in Sep 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What is prandtl number?
  • Ans. 

    Prandtl number is a dimensionless number used in fluid mechanics to describe the ratio of momentum diffusivity to thermal diffusivity.

    • It is named after the German physicist Ludwig Prandtl.

    • It is used to predict fluid flow behavior and heat transfer in different materials.

    • It is calculated as the ratio of kinematic viscosity to thermal diffusivity.

    • It is important in the study of boundary layers, turbulence, and convection...

  • Answered by AI
  • Q2. Why are manholes circular?
  • Ans. 

    Manholes are circular because they cannot fall through their own opening.

    • Circular manholes cannot fall through their own opening, unlike square or rectangular ones.

    • Circular shape distributes weight evenly, making it easier to move and handle.

    • Circular shape also reduces the risk of injury from sharp corners.

    • Circular manholes are easier to manufacture and install.

    • Circular shape allows for easier access from any angle.

    • Cir...

  • Answered by AI
  • Q3. Explain bernoulli's equation
  • Ans. 

    Bernoulli's equation relates the pressure, velocity, and height of a fluid in motion.

    • Bernoulli's equation is based on the principle of conservation of energy.

    • It is commonly used in fluid mechanics to analyze the flow of fluids through pipes and channels.

    • The equation states that as the velocity of a fluid increases, its pressure decreases, and vice versa.

    • It can be expressed as P + 1/2ρv^2 + ρgh = constant, where P is pr...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on your resume. Most of the questions asked were resume based. Focus on 1 or 2 subjects you are good at

I applied via LinkedIn and was interviewed in Mar 2021. There were 4 interview rounds.

Interview Questionnaire 

9 Questions

  • Q1. My previous work experience.
  • Q2. Sfd ,BMD , section modulus
  • Q3. Stress strain curve and steel vs aluminum property/behavior
  • Ans. 

    Stress strain curve shows the relationship between stress and strain in a material. Steel is stronger but less ductile than aluminum.

    • Stress strain curve is a graphical representation of the behavior of a material under stress

    • Steel has a higher yield strength and ultimate strength than aluminum

    • Aluminum is more ductile and has a higher strain hardening capacity than steel

    • Steel is more brittle than aluminum and is prone t...

  • Answered by AI
  • Q4. DFMEA, problem solving methodology
  • Q5. Basic day to day heat transfer experience based questions using ceiling fans, hot coffee mug, pressurized cooking vessels.
  • Q6. Few GD&T questions (bonus tolerance, composite tolerance etc.)
  • Q7. Stack up analysis
  • Q8. Few manufacturing process for sheet metal operations and when to use when in accordance to volume,lead time and cost balancing.
  • Ans. 

    Different sheet metal manufacturing processes and their suitability based on volume, lead time, and cost.

    • Laser cutting for high volume and precision

    • Punching for medium volume and cost-effective production

    • Waterjet cutting for low volume and complex shapes

    • Bending for forming and shaping

    • Stamping for high volume and repetitive shapes

    • Roll forming for continuous production of long parts

    • Choosing the right process based on the...

  • Answered by AI
  • Q9. Free body diagram (1-2 to check basic engineering acumen)
  • Ans. 

    A free body diagram is a visual representation of the forces acting on a body.

    • It shows all the external forces acting on a body

    • It helps in analyzing the forces and their effects on the body

    • It is used in engineering to design and analyze structures and machines

    • It is important to label all the forces and their directions in the diagram

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - just be clear with your basics
Be ready to answer any questions been asked regarding your previous work experience and or college projects

I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Self introduction, famaily background, least count of Varnier calliper. Screw Gauge., first angle and third angle projection.
  • Ans. 

    Answering questions related to self introduction, family background, least count of Vernier caliper, screw gauge, first angle and third angle projection.

    • Self introduction: Briefly introduce yourself, highlighting your education and experience in the field of mechanical engineering.

    • Family background: Share a few details about your family, such as their occupation or any influence they had on your career choice.

    • Least cou...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Formal dress and normal hair style, decent behaveouer

Tell us how to improve this page.

Interview Questions from Similar Companies

Intel Interview Questions
4.2
 • 214 Interviews
Grasim Industries Interview Questions
4.0
 • 205 Interviews
Texas Instruments Interview Questions
4.1
 • 120 Interviews
Synopsys Interview Questions
3.9
 • 88 Interviews
Tata Chemicals Interview Questions
4.1
 • 60 Interviews
Molex Interview Questions
3.9
 • 53 Interviews
View all
HEG Mechanical Maintenance Engineer Salary
based on 7 salaries
₹1.5 L/yr - ₹4.5 L/yr
49% less than the average Mechanical Maintenance Engineer Salary in India
View more details
Senior Officer
63 salaries
unlock blur

₹2.2 L/yr - ₹4.5 L/yr

Officer
35 salaries
unlock blur

₹1.8 L/yr - ₹5 L/yr

Assistant Manager
28 salaries
unlock blur

₹6.5 L/yr - ₹13.6 L/yr

Executive
23 salaries
unlock blur

₹3.5 L/yr - ₹10 L/yr

Deputy Manager
18 salaries
unlock blur

₹9 L/yr - ₹16.5 L/yr

Explore more salaries
Compare HEG with

Graphite India

3.6
Compare

PCBL Chemical Limited

4.0
Compare

Rain Industries

3.6
Compare

Gujarat Narmada Valley Fertilizers & Chemicals

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview