Upload Button Icon Add office photos

Godrej Industries

Compare button icon Compare button icon Compare

Filter interviews by

Godrej Industries Electrical Shift Engineer Interview Questions and Answers

Updated 31 Jul 2022

Godrej Industries Electrical Shift Engineer Interview Experiences

1 interview found

Round 1 - Technical 

(3 Questions)

  • Q1. What is difference between dry type and oil type
  • Ans. 

    Dry type and oil type are two types of transformers based on the insulation used.

    • Dry type transformers use air as insulation while oil type transformers use oil as insulation.

    • Dry type transformers are safer and more environmentally friendly than oil type transformers.

    • Oil type transformers are more efficient and can handle higher loads than dry type transformers.

    • Dry type transformers are typically used in indoor applica...

  • Answered by AI
  • Q2. What is the power factor and how it will maintain
  • Ans. 

    Power factor is the ratio of real power to apparent power in an AC circuit. It can be maintained by using capacitors or inductors.

    • Power factor is a measure of how efficiently electrical power is being used

    • It is expressed as a decimal or a percentage

    • A power factor of 1 means all the power is being used efficiently

    • A power factor less than 1 means some power is being wasted

    • Capacitors or inductors can be used to correct po...

  • Answered by AI
  • Q3. Diesel Generator synchronisation

Interview Preparation Tips

Interview preparation tips for other job seekers - need to study deep in technical
go with formal dress

Interview questions from similar companies

I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. About wmm plant concrete plant and hot mix plant
  • Q2. Machine like grader roller paver tipper and transit mixer excavator

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing
Bcoz tata company is not require any suggesting

I applied via Campus Placement

Interview Preparation Tips

Round: Resume Shortlist
Experience: It was based on CGPA and Tech projects
Tips: Ensure you have explained your tech projects well

Round: Group Discussion
Experience: A very good panel. A lot of good points were raised.
Tips: Make sure you raise your points well
Duration: 20 minutes

Round: Technical Interview
Experience: Tried to test the basics of almost everything that we have studied.

General Tips: Be confident throughout the process. That helps a lot.
Skill Tips: Brush up your courses
Skills: Engineering Knowledge
Duration: 2
College Name: IIT Madras
Motivation: The fact that the role is going to be techno-managerial. Also, the compensation.
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Conveyor AGV and robotics
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What are the steps to dismantle turbine?
  • Ans. 

    The steps to dismantle a turbine involve shutting down the system, disconnecting power sources, removing external components, disassembling internal parts, and safely disposing of any hazardous materials.

    • Shut down the turbine system and ensure it is completely powered off.

    • Disconnect all power sources to prevent any accidents during dismantling.

    • Remove any external components such as casing, covers, and piping.

    • Disassembl...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Strenthen your technical
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. PM schedule ,why why analysis, shutdown breakdown
  • Q2. Sap related question, pm maintenance related
Round 3 - Technical 

(1 Question)

  • Q1. Regarding mechanical

Interview Preparation Tips

Interview preparation tips for other job seekers - I want to relocate. Need to change profile and grove up my carrier.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the lath machine ,what is milling machine
  • Ans. 

    A lathe machine is used to shape metal or wood by rotating it against a cutting tool. A milling machine is used to cut and shape solid materials.

    • Lathe machine rotates the workpiece while the cutting tool remains stationary

    • Milling machine uses a rotating cutting tool to remove material from a stationary workpiece

    • Lathe machine is used for turning, drilling, facing, and threading operations

    • Milling machine is used for cutt...

  • Answered by AI
  • Q2. What is transformer ,what is cnc machine
  • Ans. 

    A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. A CNC machine is a computer-controlled machine tool used for cutting various materials.

    • Transformers are used to step up or step down voltage levels in electrical circuits.

    • CNC machines use computer programs to control the movement of cutting tools.

    • Transformers are commonly used in power ...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Tata Group Mechanical Engineer interview:
  • Technical
Interview preparation tips for other job seekers - For more larning skills and develop new manufacturing techniques

I applied via Company Website and was interviewed before Jul 2021. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Technical test &slayybus
  • Q2. Introduction, CNC VNC Machine,auto cad 2D

Interview Preparation Tips

Topics to prepare for Tata Group Mechanical Engineer interview:
  • Slaybuss
  • CNC Machines
  • Auto cad 2D
Interview preparation tips for other job seekers - Machenical engineering in quality and production manager

I applied via Company Website and was interviewed in Apr 2022. There were 5 interview rounds.

Round 1 - Aptitude Test 
Round 2 - Coding Test 
Round 3 - Aptitude Test 
Round 4 - Aptitude Test 
Round 5 - Technical 

(3 Questions)

  • Q1. Second low of thermodynamics
  • Ans. 

    The second law of thermodynamics states that the entropy of an isolated system always increases over time.

    • Entropy always increases in natural processes

    • Heat flows from hot to cold

    • Efficiency of heat engines is limited by the second law

    • Entropy can be thought of as a measure of disorder or randomness

    • Examples: melting ice, diffusion of gases, irreversible processes

  • Answered by AI
  • Q2. Internal Combustion (IC) Engine
  • Q3. Otto Cycle (Constant Volume Cycle)

Interview Preparation Tips

Topics to prepare for Tata Group Mechanical Engineer interview:
  • Thermodynamics
  • Mathematics
  • Strength of Materials
Interview preparation tips for other job seekers - Sir all the things that you have removed from your company are in my profile . Almost all profile match 95% of my profile
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What is vice what is gauge what is file how many types of file
  • Ans. 

    Vice, gauge, and file are common tools used in mechanical engineering.

    • Vice is a mechanical device used to hold workpieces securely in place during machining or assembly.

    • Gauge is a tool used for measuring dimensions or checking the accuracy of machined parts.

    • File is a tool used for removing material by abrasion, typically used for smoothing or shaping workpieces.

    • There are several types of files including flat, round, ha

  • Answered by AI
  • Q2. What is Hacking how many types of hacksaw what is use deep hacksaw
  • Ans. 

    Hacking is the process of cutting or shaping materials using a hacksaw. There are different types of hacksaws for various purposes, including deep hacksaws for cutting thick materials.

    • Hacking is the process of cutting or shaping materials using a hacksaw

    • Types of hacksaws include junior hacksaw, coping saw, and power hacksaw

    • Deep hacksaws are used for cutting thick materials like metal pipes or rods

  • Answered by AI
  • Q3. What is punch type of punch what is safety how many types of safety
  • Ans. 

    A punch is a tool used to create holes or indentations in materials. Safety measures are important to prevent accidents. There are various types of safety measures.

    • A punch is a hand tool with a sharp end used to create holes in materials like metal or leather.

    • Types of punches include center punch, pin punch, and drive punch.

    • Safety measures when using punches include wearing safety goggles, using proper technique, and s...

  • Answered by AI
Round 2 - family details 

(2 Questions)

  • Q1. Ghar ma kitna mamber
  • Q2. Father kaya kaam karta hai

Godrej Industries Interview FAQs

How many rounds are there in Godrej Industries Electrical Shift Engineer interview?
Godrej Industries interview process usually has 1 rounds. The most common rounds in the Godrej Industries interview process are Technical.
What are the top questions asked in Godrej Industries Electrical Shift Engineer interview?

Some of the top questions asked at the Godrej Industries Electrical Shift Engineer interview -

  1. what is difference between dry type and oil t...read more
  2. what is the power factor and how it will maint...read more
  3. Diesel Generator synchronisat...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Asian Paints Interview Questions
4.0
 • 643 Interviews
ITC Interview Questions
3.9
 • 552 Interviews
Tata Group Interview Questions
4.2
 • 358 Interviews
Dabur Interview Questions
4.0
 • 269 Interviews
Berger Paints Interview Questions
3.7
 • 258 Interviews
Nestle Interview Questions
3.9
 • 239 Interviews
View all
Junior Officer
249 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Officer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Production Officer
74 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
56 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Officer
55 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Godrej Industries with

Aditya Birla Group

4.1
Compare

Tata Group

4.2
Compare

Reliance Industries

4.0
Compare

ITC

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview