20+ Life Pharmacy Interview Questions and Answers

Common hazards in mining include cave-ins, explosions, and exposure to harmful gases and dust.

• Cave-ins: Mining operations involve digging deep into the earth, which can lead to the collapse of tunnels and shafts.

• Explosions: The presence of flammable gases and dust in mines can result in explosions if ignited.

• Exposure to harmful gases: Miners may be exposed to toxic gases such as carbon monoxide, methane, and hydrogen sulfide.

• Exposure to harmful dust: Mining activities generat...read more

Customer complaints can be prioritized based on severity, impact on customer satisfaction, frequency of occurrence, and potential solutions.

• Prioritize complaints based on severity - prioritize complaints that have a significant impact on customer satisfaction or safety.

• Consider the frequency of occurrence - prioritize complaints that are recurring and affecting multiple customers.

• Assess potential solutions - prioritize complaints that have quick and effective solutions availa...read more

Unsafe act, unsafe condition, and near miss are all incidents that could lead to accidents in the workplace.

• Unsafe act refers to an action or behavior that deviates from safe practices, such as not wearing personal protective equipment.

• Unsafe condition refers to a situation or circumstance that could lead to an accident, such as a wet floor or faulty equipment.

• Near miss refers to a situation where an accident almost occurred, but was narrowly avoided, such as a worker almost ...read more

Questions related to engines, sensors, and rectifiers.

• Petrol engines use spark ignition, while diesel engines use compression ignition.

• Compression ratio is the ratio of the volume of the combustion chamber when the piston is at the bottom of its stroke to the volume of the combustion chamber when the piston is at the top of its stroke.

• A sensor is a device that detects and responds to some type of input from the physical environment.

• A rectifier is an electrical device that con...read more

A hydraulic circuit is a system that uses pressurized fluid to transmit power.

• Hydraulic circuits consist of a pump, valves, actuators, and fluid.

• The pump pressurizes the fluid and sends it through the valves to the actuators.

• The actuators convert the fluid pressure into mechanical force to perform work.

• Examples of hydraulic circuits include excavators, cranes, and hydraulic presses.

The machine swing brake is typically located near the swing motor on heavy equipment such as excavators and cranes.

• The machine swing brake is usually located near the swing motor on heavy equipment.

• It is used to control the rotation of the machine's upper structure.

• The swing brake helps to prevent the machine from swinging uncontrollably during operation.

Check for fuel, battery, and starter motor issues to troubleshoot why the machine is not cranking.

• Check if there is enough fuel in the tank.

• Ensure the battery is charged and properly connected.

• Inspect the starter motor for any faults or malfunctions.

Answering questions related to minimising stores inventory, ABC analysis, and SAP T codes.

• To minimise stores inventory, implement just-in-time inventory management, use forecasting techniques, and reduce lead times.

• ABC analysis categorises inventory into three groups based on their value and importance.

• Some SAP T codes include MM01 for creating a material master record, ME21N for creating a purchase order, and MB51 for viewing material documents.

Injury rate is calculated by dividing the number of injuries by the total number of hours worked.

• Collect data on the number of injuries and the total number of hours worked

• Divide the number of injuries by the total number of hours worked

• Multiply the result by 200,000 to get the injury rate per 100 full-time employees

• Injury rate = (Number of injuries / Total hours worked) x 200,000

• Injury rate can be calculated for a specific time period or for a specific job or department

Power train is the mechanism that transmits power from the engine to the wheels of a vehicle.

• It consists of the engine, transmission, driveshaft, differential, and axles.

• The engine generates power which is transmitted to the transmission.

• The transmission then sends the power to the driveshaft which turns the differential.

• The differential then sends the power to the wheels through the axles.

• Different types of power trains include front-wheel drive, rear-wheel drive, and all-wh...read more

5S is a workplace organization method that focuses on safety, efficiency, and productivity.

• Sort: Eliminate unnecessary items from the workplace

• Set in Order: Organize the remaining items in a logical and efficient manner

• Shine: Clean and maintain the workplace regularly

• Standardize: Establish procedures and guidelines for maintaining the workplace

• Sustain: Continuously improve and maintain the 5S system

• Example: Labeling hazardous materials and storing them in a designated area

A hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy by pushing hydraulic fluid through the system.

• Hydraulic pumps use mechanical action to create a vacuum at the pump inlet, which allows atmospheric pressure to push the hydraulic fluid into the pump.

• The pump then forces the fluid into the hydraulic system, where it can be used to perform work.

• There are different types of hydraulic pumps, such as gear pumps, vane pumps, and piston pumps...read more

Incidents are near-misses or minor events while accidents result in injury, damage or loss.

• Incidents are events that could have resulted in harm but did not.

• Accidents are events that resulted in harm, damage or loss.

• Incidents are often used as learning opportunities to prevent future accidents.

• Examples of incidents include a worker slipping but catching themselves before falling, or a tool being dropped but not hitting anyone.

• Examples of accidents include a worker falling and...read more

My calibre is my ability to adapt and learn quickly, while my efficiency is my ability to complete tasks accurately and efficiently.

• I have a strong work ethic and am always willing to go above and beyond to ensure tasks are completed to the best of my ability.

• I am able to prioritize tasks effectively and manage my time efficiently to meet deadlines.

• I am constantly seeking to improve my skills and knowledge through self-learning and seeking feedback from others.

• For example, in...read more

A work permit system is a formal written system used to control certain types of work that are potentially hazardous.

• It is a documented procedure that outlines the steps to be taken before, during, and after a hazardous job.

• It ensures that all necessary precautions are taken to protect workers and the environment.

• It involves obtaining permission from a designated authority before starting work.

• Examples include hot work permits, confined space entry permits, and excavation per...read more

Diesel engines use compression ignition while petrol engines use spark ignition.

• Diesel engines use compression ignition, while petrol engines use spark ignition.

• Diesel engines are more fuel efficient than petrol engines.

• Petrol engines generally have higher power output compared to diesel engines.

• Diesel engines produce more torque at lower RPMs, making them better for heavy-duty applications.

• Diesel engines are typically more durable and have longer lifespans than petrol engine...read more

Starting circuit is a system used to start an engine by providing power to the starter motor.

• The starting circuit typically includes components such as the ignition switch, starter relay, battery, and starter motor.

• When the ignition switch is turned to the start position, it sends a signal to the starter relay which then activates the starter motor.

• The starter motor then cranks the engine, allowing it to start.

• If any component in the starting circuit malfunctions, the engine ...read more

Turbocharger is a device that increases the efficiency and power output of an engine by forcing extra air into the combustion chamber.

• Turbocharger uses exhaust gases to spin a turbine connected to a compressor, which then compresses the intake air before it enters the engine.

• This compressed air allows more fuel to be burned, resulting in increased power output.

• Turbochargers are commonly used in high-performance vehicles and diesel engines to improve efficiency and power.

• They ...read more

A flash back arrestor is a safety device used to prevent the ignition of flammable gases in the hoses or pipes of a gas welding or cutting system.

• Flash back arrestors are typically installed at the torch end and the regulator end of the gas system.

• They work by stopping the flame front from traveling back into the gas supply and causing an explosion.

• There are different types of flash back arrestors for different gases, such as oxygen, acetylene, propane, etc.

I am open to relocating for the right opportunity.

• I am willing to consider opportunities in different cities or countries.

• I am flexible and adaptable to new environments.

• I am excited about the prospect of exploring new places and cultures.

Yes, I am a quick learner.

• I have a strong desire to learn and improve my skills.

• I am able to adapt quickly to new situations and challenges.

• I am proactive in seeking out opportunities to learn and grow.

• For example, in my previous job, I taught myself how to use a new software program in just a few days.