Upload Button Icon Add office photos

Filter interviews by

FANUC Production & Maintenance Engineer Interview Questions and Answers

Updated 21 Sep 2022

FANUC Production & Maintenance Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed in Aug 2022. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Case Study 

Case study and solve any problem

Round 3 - Group Discussion 

Grup discuss and better solution any questions

Round 4 - Technical 

(3 Questions)

  • Q1. How many fanuc control problem and solution
  • Ans. 

    There are various Fanuc control problems and solutions that a production and maintenance engineer should be aware of.

    • Common Fanuc control problems include communication errors, servo alarms, and overtravel alarms.

    • Communication errors can be caused by faulty cables or incorrect parameter settings.

    • Servo alarms can be caused by issues with the servo motor or amplifier.

    • Overtravel alarms can be caused by mechanical issues s...

  • Answered by AI
  • Q2. Fanuc control problem and solution
  • Ans. 

    Fanuc control problems can be caused by various factors, including programming errors, hardware malfunctions, and communication issues.

    • Check the program for errors and correct them

    • Inspect the hardware components for damage or wear and replace if necessary

    • Ensure proper communication between the control and other devices

    • Perform regular maintenance and cleaning to prevent issues

    • Consult the Fanuc manual or technical suppor

  • Answered by AI
  • Q3. Company work related
Round 5 - Aptitude Test 

Company me presanality and company development and team work any problem ,and solve the problem

Round 6 - Case Study 

Case study and solve the better answer and any problem solve

Interview Preparation Tips

Interview preparation tips for other job seekers - Company any problem team work and any problem solve

Interview questions from similar companies

I applied via Walk-in and was interviewed in Sep 2019. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. What is measuring instruments
  • Ans. 

    Measuring instruments are tools used to quantify physical quantities or properties.

    • Measuring instruments are used to obtain accurate and precise measurements.

    • They are commonly used in various fields such as physics, engineering, and manufacturing.

    • Examples of measuring instruments include rulers, thermometers, voltmeters, and spectrometers.

  • Answered by AI
  • Q2. What is calibration
  • Ans. 

    Calibration is the process of adjusting or verifying the accuracy of an instrument or tool.

    • Calibration ensures that an instrument or tool is accurate and reliable.

    • It involves comparing the readings of the instrument to a known standard.

    • Calibration is important in industries such as manufacturing, engineering, and healthcare.

    • Examples of instruments that require calibration include thermometers, scales, and blood pressur

  • Answered by AI
  • Q3. What is cnc
  • Ans. 

    CNC stands for Computer Numerical Control. It is a manufacturing process that uses computerized machines to create precise and complex shapes.

    • CNC machines are used in various industries such as aerospace, automotive, and medical.

    • They are programmed using CAD (Computer-Aided Design) software to create 2D or 3D designs.

    • CNC machines can cut, drill, mill, and shape materials such as metal, wood, and plastic.

    • They offer high...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident & improve your knowledge
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Logical, reasoning, skills

Round 2 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. Project explanation
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Disel engine combustion process
  • Ans. 

    The diesel engine combustion process involves the ignition of fuel injected into the combustion chamber by compressed air.

    • Diesel fuel is injected into the combustion chamber at high pressure

    • The air in the combustion chamber is compressed by the piston, leading to high temperatures

    • The high temperature air ignites the fuel, leading to combustion and the generation of power

    • The combustion process in diesel engines is more

  • Answered by AI
  • Q2. What is two & four stroke engine.
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design with fewer moving parts compared to four-stroke engines.

    • Two-stroke engines typically produce more power for their size but are less fuel-efficient and emit more pollution.

    • Four-stroke engines are more common in cars, motorcycles, and larger machinery d...

  • Answered by AI
  • Q3. What's is hydraulic component.
  • Ans. 

    A hydraulic component is a device that utilizes fluid power to perform mechanical tasks.

    • Hydraulic components use liquid to transmit power.

    • Common examples include hydraulic cylinders, pumps, motors, valves, and hoses.

    • They are often used in heavy machinery, construction equipment, and industrial applications.

  • Answered by AI
  • Q4. What is realy,and working principle
  • Ans. 

    Realy is a type of relay used in electrical systems to control high power devices with low power signals.

    • Relays are switches that open and close circuits electromechanically

    • Realy is a type of relay specifically designed for high power applications

    • Working principle involves an electromagnet that moves an armature to open or close the circuit

    • Commonly used in industrial automation, automotive, and HVAC systems

  • Answered by AI
  • Q5. Least count of all megerment.
  • Ans. 

    Least count is the smallest change in the measured quantity that can be detected by the measuring instrument.

    • Least count is determined by the smallest division on the scale of the measuring instrument.

    • It is important for accurate measurements and precision in engineering.

    • For example, a ruler with millimeter divisions has a least count of 1 mm.

    • A vernier caliper with 0.1 mm divisions has a least count of 0.1 mm.

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Personal information
  • Q2. My self introduction
  • Q3. Engine tecnical
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Referral and was interviewed before Sep 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Thermal, heat exchanger

Round 3 - HR 

(1 Question)

  • Q1. Tell me about yourself and future goals
Round 4 - Technical 

(1 Question)

  • Q1. Thermodynamics law, unit conversion

Interview Preparation Tips

Interview preparation tips for other job seekers - be specific while giving answer. if you don't know then simply answer as NO
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Technical and field related questions. Safety related questions were also included.

Round 2 - HR 

(1 Question)

  • Q1. Safety related questions
Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Fresher aptitude syllabus reference form Google

Round 2 - Coding Test 

Basic codes , python,SQL queries

Interview Preparation Tips

Interview preparation tips for other job seekers - Work on basic first
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Sensors, Stress, force, pumps and compressor related questions .
  • Q2. 1. what is inductive sensors 2.What is capacitive sensors
  • Ans. 

    Inductive sensors detect metallic objects while capacitive sensors detect any object with a dielectric constant

    • Inductive sensors generate a magnetic field that induces eddy currents in metallic objects, causing a change in the sensor's output

    • Capacitive sensors use changes in capacitance to detect the presence or absence of an object

    • Capacitive sensors can detect non-metallic objects such as liquids, plastics, and paper

    • I...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I have shortlisted for technical round and after clearing it, have not got any information till now
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Oil and gas industry rotating equipments experience must
  • Q2. Explain about pumps, fans , gearbox compressor motor generator
  • Ans. 

    Pumps, fans, gearboxes, compressors, motors, and generators are essential components in various mechanical systems.

    • Pumps are used to move fluids, such as water or oil, through a system.

    • Fans are used to create airflow for cooling or ventilation purposes.

    • Gearboxes are used to transmit power from one component to another at different speeds or torques.

    • Compressors are used to increase the pressure of a gas, such as in air ...

  • Answered by AI
  • Q3. Explain data collection process
  • Ans. 

    Data collection process involves gathering, recording, and storing information for analysis and decision-making.

    • Identify the data needed for analysis

    • Determine the method of data collection (surveys, interviews, observations, etc.)

    • Collect data using appropriate tools and techniques

    • Ensure data accuracy and reliability

    • Store data securely for future reference

    • Analyze collected data to draw conclusions and make decisions

  • Answered by AI
  • Q4. Explain team management & work management
  • Q5. Explain condition monitoring all tools
  • Ans. 

    Condition monitoring of tools involves regularly checking and analyzing the performance and health of tools to prevent breakdowns.

    • Regularly inspect tools for signs of wear and tear

    • Use sensors to monitor tool performance in real-time

    • Analyze data collected to predict potential failures

    • Implement preventive maintenance based on monitoring results

  • Answered by AI

Skills evaluated in this interview

FANUC Interview FAQs

How many rounds are there in FANUC Production & Maintenance Engineer interview?
FANUC interview process usually has 6 rounds. The most common rounds in the FANUC interview process are Case Study, Resume Shortlist and Group Discussion.
What are the top questions asked in FANUC Production & Maintenance Engineer interview?

Some of the top questions asked at the FANUC Production & Maintenance Engineer interview -

  1. How many fanuc control problem and solut...read more
  2. Fanuc control problem and solut...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

TÜV SÜD Interview Questions
3.9
 • 64 Interviews
TKIL Interview Questions
4.2
 • 58 Interviews
Timken Interview Questions
4.0
 • 47 Interviews
Alfa Laval Interview Questions
3.9
 • 31 Interviews
Flowserve Interview Questions
3.9
 • 29 Interviews
Sulzer Interview Questions
3.8
 • 27 Interviews
View all

Fast track your campus placements

View all
Assistant Manager
42 salaries
unlock blur

₹9.5 L/yr - ₹22.8 L/yr

Senior Engineer
31 salaries
unlock blur

₹8 L/yr - ₹18 L/yr

Deputy Senior Engineer
27 salaries
unlock blur

₹4.5 L/yr - ₹8.5 L/yr

Deputy Engineer
24 salaries
unlock blur

₹3.8 L/yr - ₹6 L/yr

Applications Engineer
20 salaries
unlock blur

₹4.5 L/yr - ₹14.5 L/yr

Explore more salaries
Compare FANUC with

Sigma Electric Manufacturing Corporation

4.0
Compare

TÜV SÜD

3.9
Compare

TKIL

4.2
Compare

Timken

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview