Upload Button Icon Add office photos

Filter interviews by

Exel Rubber Junior Electrical Maintenance Engineer Interview Questions and Answers

Updated 15 Jun 2022

Exel Rubber Junior Electrical Maintenance Engineer Interview Experiences

1 interview found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical knowledge based on roles and responsibilities
Round 3 - Aptitude Test 

Tough

Round 4 - HR 

(1 Question)

  • Q1. Personal details,self addressed

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge is important and improve new skills

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Round: Test
Experience: I was surprised with the written test as i was not aware of written test ...I t
Taught that interview will be on the experience based and face to face.
Tips: I was failed in the first round.
Duration: 40 minutes
Total Questions: 20

I applied via Campus Placement and was interviewed in Aug 2020. There were 7 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Situation based and check your reasoning and analytical skills.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest, loyal and passionate about this company

I applied via Recruitment Consultant and was interviewed in Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. All about DG and 11kv line installation and maintenance.
  • Q2. About PLC.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident on what you are answering.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. 1. Specific energy in previous company, 2. Transformer protections, Motor types and working including starters, last project if any.
  • Ans. 

    I have experience with specific energy, transformer protections, motor types and starters, and have worked on various projects.

    • In my previous company, I worked on optimizing specific energy consumption in electrical systems.

    • I am familiar with various transformer protections such as overcurrent, overvoltage, and differential protection.

    • I have worked with different types of motors including AC, DC, and stepper motors, an...

  • Answered by AI
  • Q2. Breakers type and its working function
  • Ans. 

    Breakers are electrical switches that protect circuits from overloading and short circuits.

    • Breakers are classified into different types based on their voltage rating, current rating, and interrupting capacity.

    • Thermal breakers use a bimetallic strip to trip the breaker when the current exceeds the rating.

    • Magnetic breakers use an electromagnet to trip the breaker when the current exceeds the rating.

    • Ground fault circuit i...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is your work in previous company
  • Q2. HT related questions
Round 2 - HR 

(1 Question)

  • Q1. Basic introduction
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(4 Questions)

  • Q1. Dear sir production department operator
  • Q2. Diploma mechanical engineering production
  • Q3. Make a Tread and sidewall
  • Ans. 

    A tread and sidewall are key components of a tire, providing traction and protection.

    • The tread is the part of the tire that makes contact with the road surface, designed to provide grip and traction.

    • The sidewall is the vertical section of the tire that connects the tread to the bead of the tire, providing structural support and protection.

    • Tread patterns can vary based on the intended use of the tire, such as all-season...

  • Answered by AI
  • Q4. Tread jde++ Juh5 (bho) Jdexf Jdcxd 295 jdcxd Sidewall - 344 Sidewall -535
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. How to configure the SCADA?
  • Ans. 

    SCADA can be configured by setting up communication protocols, defining data points, creating graphical interfaces, and configuring alarms.

    • Set up communication protocols such as Modbus, DNP3, or OPC to communicate with field devices

    • Define data points by specifying the tags for each device or sensor being monitored

    • Create graphical interfaces by designing screens that display real-time data in a user-friendly format

    • Confi...

  • Answered by AI
  • Q2. How configure the i/o modules?
  • Ans. 

    I/O modules can be configured by setting up the input and output signals, assigning addresses, and configuring communication protocols.

    • Identify the type of I/O module being used (analog, digital, etc.)

    • Assign addresses to the input and output signals for communication

    • Configure the communication protocols such as Modbus, Profibus, etc.

    • Set up the parameters for data transmission and reception

    • Test the configured I/O module

  • Answered by AI
  • Q3. How to assign ip address?
  • Ans. 

    Assigning an IP address involves configuring the network settings of a device to enable communication with other devices on the same network.

    • Access the network settings of the device

    • Choose a suitable IP address based on the network's subnet

    • Assign the IP address along with subnet mask and default gateway

    • Ensure no IP address conflicts with other devices on the network

    • Save the settings and test the connection

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Only about your self

Skills evaluated in this interview

I applied via Campus Placement and was interviewed before Nov 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Assignment 

Technical engineer in plastic line in cipet Karnataka Mysore

Round 3 - Case Study 

BSc after cipet in Karnataka plastic processing technique

Round 4 - One-on-one 

(5 Questions)

  • Q1. Quality and production daily working in study my college hard work
  • Q2. Tyre using three type materials natural lover
  • Ans. 

    Tyres are made using three types of materials: natural rubber, synthetic rubber, and carbon black.

    • Natural rubber is derived from rubber trees and provides elasticity and flexibility to the tyre.

    • Synthetic rubber is made from petroleum and provides durability and resistance to wear and tear.

    • Carbon black is added to the rubber to improve its strength and durability.

    • The combination of these three materials results in a tyr...

  • Answered by AI
  • Q3. All plastic line all materials
  • Q4. Plastic property and production and quality
  • Q5. Production manager interview

Interview Preparation Tips

Topics to prepare for JK Tyres Production Engineer interview:
  • Packaging
Interview preparation tips for other job seekers - First time tires company Mysore and all plastic material knowledge plastic degree
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Sep 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basics of Electrical

Round 3 - Group Discussion 

Talk about given topic

Round 4 - HR 

(1 Question)

  • Q1. What are the heat producing components in this room
  • Ans. 

    The heat producing components in this room include computers, servers, lighting fixtures, and HVAC systems.

    • Computers

    • Servers

    • Lighting fixtures

    • HVAC systems

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Gain your knowledge good luck.

Exel Rubber Interview FAQs

How many rounds are there in Exel Rubber Junior Electrical Maintenance Engineer interview?
Exel Rubber interview process usually has 4 rounds. The most common rounds in the Exel Rubber interview process are Resume Shortlist, Technical and Aptitude Test.

Tell us how to improve this page.

Interview Questions from Similar Companies

MRF Tyres Interview Questions
3.7
 • 298 Interviews
Ceat Tyres Interview Questions
4.0
 • 161 Interviews
Apollo Tyres Interview Questions
4.0
 • 129 Interviews
JK Tyres Interview Questions
3.6
 • 94 Interviews
Goodyear Interview Questions
3.7
 • 54 Interviews
Sintex-bapl Interview Questions
3.8
 • 32 Interviews
View all
Junior Engineer
81 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Supervisor
26 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Engineer
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Supervisor
17 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Commercial Assistant
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Exel Rubber with

Birla Tyres

3.6
Compare

JK Tyres

3.6
Compare

Ceat Tyres

4.0
Compare

MRF Tyres

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview