Upload Button Icon Add office photos

Filter interviews by

Excel Technical Services Electrical Technician Interview Questions and Answers

Updated 7 Apr 2023

Excel Technical Services Electrical Technician Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Basics of electrical engineering
  • Q2. LT HT Motors,Transformer, Switchgear quick question
Round 3 - HR 

(1 Question)

  • Q1. Salary expectation, work culture and work hours discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Just go with flow and be honest about what you know.

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. Testing related

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I applied via Approached by Company and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is CB operation and use?
  • Ans. 

    CB operation and use refers to the operation and use of circuit breakers in electrical systems.

    • CBs are used to protect electrical systems from overloads and short circuits.

    • They work by interrupting the flow of current when a fault is detected.

    • CBs can be manually or automatically operated.

    • They come in different types, such as air, oil, vacuum, and SF6 CBs.

    • CBs are commonly used in residential, commercial, and industrial

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - 3 manths traning and doing any working condition

I applied via Company Website and was interviewed before Feb 2020. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. N questions about HTML5 and toubro limited

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my B.Tech curriculum i.e. computer science related topics. He stressed a lot on the basics related to my project topic. Luckily I was able to answer most of the questions correctly. I tried to answer each question with examples and also used props on the table (like pens, paperweights, pen stands etc.) to explain my theories. It was my first offcampus interview, and I think I did pretty well for a fresher. You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is slip ring
  • Ans. 

    A slip ring is an electrical component used to transfer power and electrical signals from a stationary to a rotating structure.

    • Allows for continuous rotation without tangling wires

    • Commonly used in electromechanical systems like motors, generators, and wind turbines

    • Consists of stationary brushes and rotating conductive rings

    • Helps in transmitting power, data, and signals across rotating interfaces

  • Answered by AI
  • Q2. What is oer unit slip
  • Ans. 

    Unit slip is the difference between synchronous speed and rotor speed in an induction motor.

    • Unit slip is expressed as a fraction or percentage.

    • It is used to calculate the rotor speed of an induction motor.

    • Unit slip is necessary for determining the torque and efficiency of the motor.

    • For example, if the synchronous speed of a motor is 1800 RPM and the rotor speed is 1750 RPM, the unit slip would be 0.0278 or 2.78%.

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. What is your family background

Interview Preparation Tips

Interview preparation tips for other job seekers - future goals to determine whether or not you’re looking to stay with the company in the long term. Additionally, this question is used to gauge your ambition, expectations for your career and your ability to plan. The best way to handle this question is to determine your current career trajectory and how this role plays to help you reach your ultimate goals.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Dec 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. The Electrical technician job description entails participating in independent maintenance related training activities organized by the field operations teams and coordinating shutdowns to ensure that ...
  • Q2. Commercial and Industrial Electrical Maintenance is the process of regularly inspecting, testing, cleaning, and repairing electrical systems and components to ensure they are safe and functioning Prope...
  • Q3. The technician’s role also includes participating in planning, ensuring effective spare parts management, and supervising continuous project improvement.
  • Q4. Electrical technicians perform various functions, depending on the particular operations of the company or organization they work with. However, their role is majorly to ensure effective repairs and mainte...

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrical safety
Power suppliers
Electrical troubleshooting
PLC Electrical control panel
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is the three-phase voltage?
  • Ans. 

    Three-phase voltage is a type of electrical power transmission that utilizes three alternating currents.

    • Three-phase voltage consists of three alternating currents that are 120 degrees out of phase with each other.

    • It is commonly used in industrial and commercial applications for its efficiency and power distribution capabilities.

    • The voltage levels for three-phase systems can vary depending on the application, with commo...

  • Answered by AI
  • Q2. What is the process for entering single-phase voltage?
  • Ans. 

    The process for entering single-phase voltage involves connecting the voltage source to the load through a single conductor.

    • Connect the single-phase voltage source to the load through a single conductor

    • Ensure proper insulation and grounding for safety

    • Check the voltage level using a multimeter before connecting the load

    • Make sure the load is compatible with the voltage rating

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Naukri.com and was interviewed in Jul 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Electrical department all Technical questions and General averness questions in MCQ type

Round 3 - Technical 

(2 Questions)

  • Q1. Electrical all Technical questions
  • Q2. 1.Types of Transformer 2.Types of Electrical Drives 3. What is the frequence of India 4. What is your goal
  • Ans. 

    Types of transformers include power transformers, distribution transformers, instrument transformers. Types of electrical drives include AC drives, DC drives, servo drives.

    • Power transformers are used in high voltage transmission and distribution systems.

    • Distribution transformers are used to step down voltage for use in homes and businesses.

    • Instrument transformers are used for measuring voltage and current in power syst...

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. 1. Tell me about yourself 2. What is your greatest strength 3. Why do you want to work here 4. Why should we choose you
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Nov 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

12 th & Electricale Engineer Diploma

Round 2 - Technical 

(3 Questions)

  • Q1. Working with the safety of all the colleagues working with you and your own safety.
  • Q2. Be it any machinery or any part-time job, keep it safe.
  • Q3. Doing the work as instructed by your senior.

Interview Preparation Tips

Interview preparation tips for other job seekers - Whatever the company, do better for the company.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Sep 2023. There were 4 interview rounds.

Round 1 - Assignment 

Conduct Theoretical Test.

Round 2 - Aptitude Test 

Practical Test and group dissertation with electrical

Round 3 - HR 

(3 Questions)

  • Q1. What is the current and voltage difference?
  • Ans. 

    Current is the flow of electric charge, measured in Amperes, while voltage is the force that drives the current, measured in Volts.

    • Current is the rate of flow of electric charge in a circuit

    • Voltage is the electrical potential difference that drives the current

    • Current is measured in Amperes (A)

    • Voltage is measured in Volts (V)

    • Ohm's Law states that V = I * R, where V is voltage, I is current, and R is resistance

  • Answered by AI
  • Q2. Types of motor ?
  • Ans. 

    Types of motors include AC motors, DC motors, synchronous motors, asynchronous motors, stepper motors, and servo motors.

    • AC motors: Alternating current motors commonly used in household appliances and industrial applications.

    • DC motors: Direct current motors used in applications where speed control is important.

    • Synchronous motors: Maintain a constant speed and are used in applications like clocks and timers.

    • Asynchronous ...

  • Answered by AI
  • Q3. AC or DC different?
  • Ans. 

    AC and DC are two types of electrical current with different characteristics and applications.

    • AC stands for alternating current, which periodically changes direction and magnitude.

    • DC stands for direct current, which flows in one direction at a constant voltage.

    • AC is commonly used in household appliances and power distribution systems.

    • DC is often used in electronics, such as batteries and computer power supplies.

  • Answered by AI
Round 4 - Assignment 

Solar field presentation

Excel Technical Services Interview FAQs

How many rounds are there in Excel Technical Services Electrical Technician interview?
Excel Technical Services interview process usually has 3 rounds. The most common rounds in the Excel Technical Services interview process are Resume Shortlist, One-on-one Round and HR.
What are the top questions asked in Excel Technical Services Electrical Technician interview?

Some of the top questions asked at the Excel Technical Services Electrical Technician interview -

  1. LT HT Motors,Transformer, Switchgear quick quest...read more
  2. Basics of electrical engineer...read more

Tell us how to improve this page.

Excel Technical Services Electrical Technician Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Excel Technical Services Electrical Technician Salary
based on 18 salaries
₹1.5 L/yr - ₹3.1 L/yr
23% less than the average Electrical Technician Salary in India
View more details

Excel Technical Services Electrical Technician Reviews and Ratings

based on 4 reviews

4.8/5

Rating in categories

4.9

Skill development

4.9

Work-life balance

4.7

Salary

4.9

Job security

4.6

Company culture

4.8

Promotions

4.6

Work satisfaction

Explore 4 Reviews and Ratings
Electrical Engineer
30 salaries
unlock blur

₹1.8 L/yr - ₹4.6 L/yr

Electrical Supervisor
21 salaries
unlock blur

₹2 L/yr - ₹5.5 L/yr

Electrical Technician
18 salaries
unlock blur

₹1.5 L/yr - ₹3.1 L/yr

Electrical Maintenance Engineer
18 salaries
unlock blur

₹2 L/yr - ₹4 L/yr

Diploma Electrical Engineer
8 salaries
unlock blur

₹2.4 L/yr - ₹3.6 L/yr

Explore more salaries
Compare Excel Technical Services with

Larsen & Toubro Limited

3.9
Compare

L&T Construction

4.0
Compare

Tata Projects

4.2
Compare

Megha Engineering & Infrastructures

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview