10+ Batangas Health Care Hospital- Jesus Of Nazareth Interview Questions and Answers

Steel sheets are available in various thicknesses depending on the application.

• The thickness of steel sheets ranges from 30 gauge to 7 gauge.

• Thinner sheets are used for applications such as roofing and siding, while thicker sheets are used for structural purposes.

• Common thicknesses include 16 gauge, 14 gauge, 12 gauge, and 10 gauge.

• The thickness of a steel sheet can also be measured in millimeters or inches.

• The thickness of a steel sheet can affect its strength and durability...read more

Factors to consider prior to finalizing land for construction.

• Location and accessibility

• Zoning and land use regulations

• Soil and environmental conditions

• Availability of utilities and infrastructure

• Cost and budget

• Future development plans and potential risks

Explanation of k factors used for wind load calculation with values for a site.

• K factors are used to calculate wind loads on structures.

• K factors depend on the shape, size, and orientation of the structure.

• Values for K factors can be found in ASCE 7-16 or other wind load standards.

• Examples of K factors include Kd for wind directionality and Kz for height above ground.

• Values for K factors can vary depending on the specific site and local wind conditions.

Various types of steel coatings/materials are available in the market, including galvanized, aluminized, and stainless steel.

• Galvanized steel coating is made of zinc and provides excellent corrosion resistance.

• Aluminized steel coating is made of aluminum and silicon and is heat-resistant.

• Stainless steel is an alloy of iron, carbon, and other elements, and is highly resistant to corrosion and staining.

• Other coatings/materials include epoxy, polyurethane, and ceramic coatings.

• T...read more

kd factor is taken as 0.9 instead of 1 to account for losses in the system.

• kd factor is used in control valve sizing calculations.

• It accounts for the pressure drop across the valve and the piping system.

• The value of kd factor is less than 1 to account for losses in the system.

• These losses can be due to friction, turbulence, or other factors.

• For example, if the kd factor is 0.9, it means that the valve will have a 10% pressure drop at full flow.

Module VOC and VMP combination refers to the open circuit voltage and maximum power voltage of a solar panel.

• VOC (Voltage Open Circuit) is the maximum voltage that a solar panel can produce when there is no load connected.

• VMP (Voltage Maximum Power) is the voltage at which the solar panel produces the maximum power output.

• The combination of VOC and VMP is important for determining the efficiency and performance of a solar panel.

• For example, a solar panel may have a VOC of 40V...read more

IDT mechanical protection refers to the mechanical protection provided to insulated conductors or cables to prevent damage.

• IDT stands for Insulated Dead-end Termination

• Mechanical protection can include using conduits, cable trays, or protective sleeves

• It is important to ensure proper mechanical protection to prevent damage to the insulation and conductors

• Examples of mechanical protection methods include using PVC conduits for wiring in buildings or using metal conduits for ou...read more

String fault solution refers to troubleshooting and fixing issues related to electrical wiring or connections.

• Identify the location of the string fault by using a multimeter to test for continuity.

• Inspect the wiring for any visible damage or loose connections.

• Repair or replace the faulty wiring or connections to resolve the issue.

• Test the circuit again to ensure the string fault has been successfully resolved.

Types of testing for switchyard equipment

• Functional testing

• Performance testing

• Integration testing

• Acceptance testing

• Reliability testing