i
Delfingen
Filter interviews by
Top trending discussions
posted on 12 Mar 2025
I appeared for an interview before Mar 2024.
A basic hydraulic circuit diagram illustrates fluid power systems using components like pumps, valves, and actuators.
Components include a hydraulic pump, which generates flow.
A directional control valve directs fluid to the actuator.
An actuator (cylinder or motor) converts hydraulic energy to mechanical work.
Pressure relief valves protect the system from overpressure.
Hydraulic fluid is typically oil, which transfers po
Key considerations for purchasing EOT crane ropes include material, load capacity, safety standards, and maintenance requirements.
Material: Choose between steel wire ropes or synthetic ropes based on application; steel is durable, while synthetic is lightweight.
Load Capacity: Ensure the rope can handle the maximum load of the crane; for example, a 10-ton crane requires a rope rated for at least 10 tons.
Safety Standards...
EOT cranes can face various issues affecting performance, safety, and efficiency, requiring regular maintenance and troubleshooting.
Electrical failures: Issues with the control panel or wiring can lead to operational failures.
Mechanical wear: Components like gears and bearings may wear out, causing noise and reduced efficiency.
Overloading: Exceeding the crane's load capacity can lead to structural damage or failure.
Bra...
I applied via Referral and was interviewed before Nov 2020. There were 3 interview rounds.
I applied via Naukri.com and was interviewed before Jan 2020. There were 3 interview rounds.
EV HV architecture consists of battery, motor, inverter, and controller.
EV HV architecture is responsible for converting DC power from the battery to AC power for the motor.
Major components include battery, motor, inverter, and controller.
Battery stores energy and provides power to the motor.
Motor converts electrical energy into mechanical energy to drive the wheels.
Inverter converts DC power from the battery to AC pow...
I applied via Naukri.com and was interviewed in Jun 2022. There were 3 interview rounds.
As an assistant engineer, I plan the number of machines required and create monthly plans.
I plan the number of machines needed for various projects and tasks.
I consider factors like project timelines, workload, and resource availability.
I create monthly plans by analyzing project requirements and allocating resources accordingly.
I collaborate with team members and supervisors to ensure efficient planning and execution.
...
I create a daily report by summarizing the tasks completed, any issues encountered, and plans for the next day.
Start by listing all the tasks completed during the day
Note any issues encountered and how they were resolved
Include any progress made towards long-term goals
Outline plans for the next day, including any pending tasks
Ensure the report is concise and easy to understand
The capacity of my previous plant was 500 units per day.
The plant had a daily production capacity of 500 units.
We were able to meet the demand of our clients with this capacity.
The plant had a well-organized production line to ensure maximum output.
We regularly monitored and optimized the production process to increase efficiency.
The capacity was sufficient for the size of the plant and the demand of the market.
I appeared for an interview in Sep 2023.
There was a aptitude test
Stress is the force applied to a material, while strain is the resulting deformation. A stress-strain graph for ductile materials shows the relationship between stress and strain. Vernier calipers formula is used for precise measurements.
Stress is the force applied per unit area on a material, measured in units like N/m^2 or Pa.
Strain is the ratio of the change in length to the original length of a material.
A stress-st...
I applied via WorkIndia and was interviewed before Nov 2021. There were 3 interview rounds.
Computer hardware work marketing manager
I applied via Recruitment Consulltant
I appeared for an interview in Dec 2020.
Round duration - 70 Minutes
Round difficulty - Medium
There were 5 people in the zoom meet, including me. Rest all 4 were interviewers, 3 from India and 1 from the United Kingdom.
They started with my introduction and then moved on to the questions from my resume, starting with my internship at Samsung Bangalore and then projects.
Then another interviewer asked about my weakness and strength. Then comes the turn of coding questions.
Starting with finding the minimum element in O(1) time, rotating the 2-D array by 90 degrees, OOPS questions were also asked like- polymorphism, abstraction, virtual class. Some OS questions were- cache, paging algorithms.
Then come my POR and other activities.
You are provided with an array of integers ARR
of size N
and an integer K
. Your task is to find and return the K
-th smallest value present in the array. All elements...
Find the K-th smallest element in an array of distinct integers.
Sort the array and return the element at index K-1.
Use a min-heap to find the K-th smallest element efficiently.
Implement quickselect algorithm for optimal performance.
You are provided with a square matrix of non-negative integers of size 'N x N'
. The task is to rotate this matrix by 90 degrees in an anti-clockwise directi...
Rotate a square matrix by 90 degrees anti-clockwise without using extra space.
Iterate through each layer of the matrix from outer to inner layers
Swap elements in groups of 4 to rotate the matrix in place
Handle odd-sized matrices separately by adjusting the loop boundaries
Page replacement algorithms are used in operating systems to decide which page to replace when a new page needs to be brought in.
FIFO (First In, First Out) - replaces the oldest page in memory
LRU (Least Recently Used) - replaces the page that has not been used for the longest time
LFU (Least Frequently Used) - replaces the page that has been used the least number of times
Optimal - replaces the page that will not be used
Tip 1 : Practice GFG Must Do section, solve at least 5 Questions daily
Tip 2 : Start talking to new people regarding technology to remove hesitation at the time of the interview.
Tip 3 : Be in contact with a senior already working in that company, ask them regarding previous experience and new project the company is working on.
Tip 4 : Once you are done with GFG must do questions, now complete leetcode sorting by your target company.
Tip 5 : For core subjects refer to gate smashers and knowledge gate videos on youtube.
Tip 1 : Try to modify your resume according to the company you are applying for, for this read their Job Description provided to you.
Tip 2 : Mention no more than 3 projects and 1,2 internships.
Tip 3 : Divide your skills into beginner, intermediate and hard sections, otherwise don't mention too many skills.
Tip 4 : Don't mention to many Position Of Responsibilities( at max 2-3).
I applied via LinkedIn and was interviewed in Sep 2021. There was 1 interview round.
based on 1 interview
Interview experience
Quality Engineer
28
salaries
| ₹2 L/yr - ₹5.2 L/yr |
Quality Inspector
23
salaries
| ₹1.8 L/yr - ₹3 L/yr |
Junior Engineer
18
salaries
| ₹2 L/yr - ₹3.5 L/yr |
Junior Quality Engineer
10
salaries
| ₹2.6 L/yr - ₹3.5 L/yr |
Production Supervisor
10
salaries
| ₹3.3 L/yr - ₹4.8 L/yr |
Saud Bahwan Group
Plastic Omnium
Kiswok Industries
Jaguar Land Rover