Upload Button Icon Add office photos

Filter interviews by

Clear (1)

D-VoiS Communications Network Engineer Interview Questions and Answers

Updated 30 Aug 2022

D-VoiS Communications Network Engineer Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Ospf bgp networking troubleshooting questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Worst company never join no proper assets and salary

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Feb 2024.

Round 1 - Technical 

(6 Questions)

  • Q1. What is difference between straight through and cross over cabling
  • Ans. 

    Straight through cables are used to connect different types of devices, while crossover cables are used to connect similar devices.

    • Straight through cables have the same wiring at both ends, while crossover cables have the wiring reversed at one end.

    • Straight through cables are commonly used to connect a computer to a switch or router, while crossover cables are used to connect two computers or two switches directly.

    • Exam...

  • Answered by AI
  • Q2. Port number of FTP, HTTP, DNS, DHCP
  • Ans. 

    Port numbers for FTP, HTTP, DNS, DHCP

    • FTP uses port 21 for control and port 20 for data transfer

    • HTTP uses port 80 for communication

    • DNS uses port 53 for domain name resolution

    • DHCP uses port 67 for server and port 68 for client communication

  • Answered by AI
  • Q3. Name some Firewalls in market
  • Ans. 

    Some popular firewalls in the market include Cisco ASA, Palo Alto Networks, Fortinet FortiGate, and Check Point.

    • Cisco ASA

    • Palo Alto Networks

    • Fortinet FortiGate

    • Check Point

  • Answered by AI
  • Q4. What are trunck and access ports
  • Ans. 

    Trunk ports carry traffic for multiple VLANs, while access ports carry traffic for a single VLAN.

    • Trunk ports are used to interconnect switches and carry traffic for multiple VLANs

    • Access ports are used to connect end devices and carry traffic for a single VLAN

    • Trunk ports use tagging to differentiate between VLANs

    • Access ports do not use tagging and assign all incoming traffic to a specific VLAN

  • Answered by AI
  • Q5. What is a VLAN
  • Ans. 

    A VLAN (Virtual Local Area Network) is a logical grouping of devices on a network that communicate as if they are on the same physical network.

    • VLANs help improve network security by isolating traffic between different groups of devices.

    • They can be used to segment network traffic for different departments, applications, or security levels.

    • VLANs are configured at the switch level and allow for more efficient use of netwo...

  • Answered by AI
  • Q6. What is SNMP
  • Ans. 

    SNMP stands for Simple Network Management Protocol, used for monitoring and managing network devices.

    • SNMP is a protocol used to manage and monitor network devices

    • It allows network administrators to collect information from network devices like routers, switches, servers, etc.

    • SNMP operates on the application layer of the OSI model

    • It uses a manager-agent model where the manager collects data from agents on network device...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jun 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(7 Questions)

  • Q1. Osi layer, ip , epon and gpon
  • Q2. Osi layer,ip, epon and gpon
  • Q3. Osi layer, ip, epon and gpon
  • Q4. Mac work on which layer?
  • Ans. 

    Mac works on the Data Link layer.

    • Mac stands for Media Access Control.

    • It operates on the Data Link layer of the OSI model.

    • Responsible for the addressing of devices on a network.

    • Examples include Ethernet MAC addresses.

  • Answered by AI
  • Q5. Ip work on which layer?
  • Ans. 

    IP works on the network layer (Layer 3) of the OSI model.

    • IP stands for Internet Protocol.

    • It is responsible for routing packets across different networks.

    • IP addresses are unique identifiers assigned to devices on a network.

    • Examples of IP versions include IPv4 and IPv6.

  • Answered by AI
  • Q6. What is epon and gpon
  • Ans. 

    EPON and GPON are types of passive optical networks used for delivering telecommunications services.

    • EPON stands for Ethernet Passive Optical Network and uses Ethernet technology for data transmission.

    • GPON stands for Gigabit Passive Optical Network and offers higher bandwidth and longer reach compared to EPON.

    • Both EPON and GPON are used for delivering high-speed internet, VoIP, and IPTV services to subscribers.

    • EPON is m...

  • Answered by AI
  • Q7. What is ARP? what is pon
  • Ans. 

    ARP stands for Address Resolution Protocol, used to map IP addresses to MAC addresses. PON stands for Passive Optical Network, a type of fiber-optic network.

    • ARP is used to resolve IP addresses to MAC addresses on a local network

    • ARP operates at the data link layer of the OSI model

    • PON is a type of fiber-optic network that uses passive optical splitters to serve multiple users

  • Answered by AI
Round 3 - Technical 

(2 Questions)

  • Q1. What is subnetting and router work on which layer
  • Ans. 

    Subnetting is the process of dividing a network into smaller subnetworks. Routers operate at the network layer (Layer 3) of the OSI model.

    • Subnetting involves creating multiple smaller networks from a single larger network by dividing the IP address range.

    • It helps in efficient utilization of IP addresses and improves network performance by reducing broadcast traffic.

    • Routers operate at the network layer (Layer 3) of the ...

  • Answered by AI
  • Q2. Lan card work on which layer?
  • Ans. 

    Lan card works on the Data Link layer of the OSI model.

    • Lan card operates at Layer 2 of the OSI model, which is the Data Link layer.

    • It is responsible for the physical addressing of devices on the network.

    • Examples of Lan cards include Ethernet cards and wireless network adapters.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Network engineer

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Prepare from CCNA syllabus?
  • Q2. What is IP ......................?
  • Ans. 

    IP stands for Internet Protocol, a set of rules governing the format of data sent over the internet.

    • IP is responsible for routing data packets between devices on a network.

    • It assigns a unique address to each device on the network, known as an IP address.

    • There are two versions of IP in use today: IPv4 and IPv6.

    • IPv4 addresses are 32-bit numbers, while IPv6 addresses are 128-bit numbers.

    • IP is a layer 3 protocol in the OSI...

  • Answered by AI

Skills evaluated in this interview

Interview Questionnaire 

2 Questions

  • Q1. What is static and DHCP?
  • Ans. 

    Static and DHCP are two methods of assigning IP addresses to devices on a network.

    • Static IP addresses are manually assigned to a device and do not change unless manually reconfigured.

    • DHCP (Dynamic Host Configuration Protocol) automatically assigns IP addresses to devices on a network.

    • DHCP can also assign other network configuration information, such as subnet mask and default gateway.

    • Static IP addresses are useful for ...

  • Answered by AI
  • Q2. How to configure a router?
  • Ans. 

    Configuring a router involves accessing its web interface, setting up basic network settings, and configuring advanced features.

    • Connect to the router's web interface using a web browser

    • Set up basic network settings such as IP address, subnet mask, and default gateway

    • Configure advanced features such as port forwarding, DHCP, and firewall rules

    • Save and apply the changes to the router's configuration

    • Test the router's conn

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You must have the knowledge of networking and how ISP works

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is BGP community
  • Ans. 

    BGP community is a way to group BGP routes and apply policies to them based on common attributes.

    • BGP community is a 32-bit numerical value attached to BGP routes.

    • It can be used to group routes based on common attributes such as geographic location, customer type, or service level.

    • Network operators can use BGP communities to apply routing policies, such as controlling route propagation or setting local preference.

    • Commun...

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. New job APL and this job experience
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Network Engineer Olt OTDR Installation OFC
  • Q2. To
Round 2 - Technical 

I was interviewed in Nov 2016.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I was asked to submit my r

I applied via Campus Placement and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

There was total 100questions all are related to our diploma/btech paper..very easy

Round 2 - Technical 

(1 Question)

  • Q1. Technical round was very impressive and cool...just asked little little questions and they are see only confidence level.
Round 3 - HR 

(3 Questions)

  • Q1. Tell me about yourself.
  • Q2. Where do you see yourself in 5 years?
  • Q3. What is your family background?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and stay fit ... 👁️ Contact
Contribute & help others!
anonymous
You can choose to be anonymous

D-VoiS Communications Interview FAQs

How many rounds are there in D-VoiS Communications Network Engineer interview?
D-VoiS Communications interview process usually has 1 rounds. The most common rounds in the D-VoiS Communications interview process are Technical.

Recently Viewed

INTERVIEWS

Bigleap Solutions

No Interviews

INTERVIEWS

Technosys Services

No Interviews

SALARIES

Diesel Locomotive Works

INTERVIEWS

Algoworks Technologies

No Interviews

INTERVIEWS

Algoworks Technologies

No Interviews

INTERVIEWS

Diesel Locomotive Works

No Interviews

INTERVIEWS

Diesel Locomotive Works

No Interviews

INTERVIEWS

Technosys Services

No Interviews

INTERVIEWS

Algoworks Technologies

10 top interview questions

LIST OF COMPANIES

D-VoiS Communications

Locations

Tell us how to improve this page.

D-VoiS Communications Network Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more

Fast track your campus placements

View all
D-VoiS Communications Network Engineer Salary
based on 86 salaries
₹1.5 L/yr - ₹5 L/yr
42% less than the average Network Engineer Salary in India
View more details

D-VoiS Communications Network Engineer Reviews and Ratings

based on 15 reviews

4.0/5

Rating in categories

3.9

Skill development

4.0

Work-life balance

2.6

Salary

3.5

Job security

4.0

Company culture

2.7

Promotions

4.3

Work satisfaction

Explore 15 Reviews and Ratings
Network Engineer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Network Support Engineer
15 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Network Support Executive
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

NOC Engineer
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Network Engineer L1
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare D-VoiS Communications with

ACT Fibernet

4.0
Compare

Hathway

3.5
Compare

Tata Communications

4.0
Compare

Bharti Airtel

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview