Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Cummins Team. If you also belong to the team, you can get access from here

Cummins Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Cummins Student Trainee Interview Questions and Answers

Updated 1 Apr 2024

Cummins Student Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Fair and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Least count of micro meter
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale of the micrometer.

    • The least count of a micrometer is typically 0.01 mm or 0.001 mm, depending on the type of micrometer.

    • It is determined by the number of divisions on the scale of the micrometer and the pitch of the screw.

    • For example, a micrometer with 50 divisions on the sleeve and a pitch of 0.5 mm would have a least count of 0.

  • Answered by AI
  • Q2. Difine mecgaincal engine

Interview Preparation Tips

Topics to prepare for Cummins Student Trainee interview:
  • Mechanical Engineering
Interview preparation tips for other job seekers - Hindi and english

Interview questions from similar companies

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions on Process,Simulation, CAD

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Explain Compilation process steps?
  • Ans. 

    Compilation process involves several steps to convert source code into executable code.

    • Preprocessing: Includes header file inclusion, macro expansion, and conditional compilation.

    • Compilation: Translates source code into assembly code.

    • Assembly: Converts assembly code into machine code.

    • Linking: Combines object files and libraries to create an executable file.

    • Loading: Loads the executable file into memory and prepares it

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well prior the interview, revise all the basic concepts of Embedded C and MATLAB if you have applied for embedded systems.

I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Quant , Logical REASONING , Java

Round 2 - HR 

(3 Questions)

  • Q1. Why should we hire you?
  • Q2. What is your family background?
  • Q3. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Great company to work for , Be honest and well rounded discussions on CV

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions were related to the post John Deere were offering to candidates. For me it was Diagnostics Author position.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be aware that answer as simple as you can.
If you don't know the answer don't try to attempt simply say that you don't know and assure interviewer that if you ll get a chance you will definitely answer that.

Be optimistic and attentive.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Regarding current work experience
Round 2 - HR 

(1 Question)

  • Q1. Salary negotiations
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is your highest qualification
  • Ans. 

    My highest qualification is a Master's degree in Electrical Engineering.

    • Master's degree in Electrical Engineering

    • Specialized in power systems

    • Thesis focused on renewable energy integration

    • Completed advanced courses in control systems

    • Published research papers in IEEE conferences

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is your role and responsibilities in the project quality?
  • Ans. 

    As a Senior Engineer, my role in project quality is to ensure that all deliverables meet the required standards and specifications.

    • Developing and implementing quality assurance processes and procedures

    • Conducting regular audits and inspections to identify any quality issues

    • Collaborating with cross-functional teams to address and resolve quality concerns

    • Creating and maintaining quality documentation, including test plans...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Nov 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. Explain your experience.I have worked in Feed back infra as water supply expert.I have designed various capacities water treatment plant.
Round 2 - Technical 

(2 Questions)

  • Q1. Where I worked . About my experience. Details regarding my experience . Question regarding design of water treatment plant
  • Q2. Nature of work preferred. Salary requirements

Interview Preparation Tips

Topics to prepare for TÜV SÜD Consultant interview:
  • Water Supply
Interview preparation tips for other job seekers - Be updated always.Be positive.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is p&ID and why is it used?
  • Ans. 

    P&ID stands for Piping and Instrumentation Diagram, used in engineering to show the piping of a process flow together with the installed equipment and instrumentation.

    • P&ID is a detailed diagram that shows the piping of a process flow, along with the equipment and instrumentation used in the process.

    • It is used in engineering to understand the design, construction, and operation of a process plant or industrial facility.

    • ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be smart with your answers

Cummins Interview FAQs

How many rounds are there in Cummins Student Trainee interview?
Cummins interview process usually has 1 rounds. The most common rounds in the Cummins interview process are Technical.
What are the top questions asked in Cummins Student Trainee interview?

Some of the top questions asked at the Cummins Student Trainee interview -

  1. Least count of micro me...read more
  2. Difine mecgaincal eng...read more

Tell us how to improve this page.

Cummins Student Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.5k Interviews
Siemens Interview Questions
4.1
 • 422 Interviews
Bosch Interview Questions
4.2
 • 331 Interviews
Thermax Limited Interview Questions
4.1
 • 252 Interviews
Ashok Leyland Interview Questions
4.1
 • 242 Interviews
ABB Interview Questions
4.1
 • 238 Interviews
John Deere Interview Questions
4.1
 • 231 Interviews
View all
Cummins Student Trainee Salary
based on 4 salaries
₹1.5 L/yr - ₹1.8 L/yr
50% less than the average Student Trainee Salary in India
View more details
Junior Shop Manager
1.4k salaries
unlock blur

₹1.7 L/yr - ₹10.4 L/yr

Junior Manager
884 salaries
unlock blur

₹2.5 L/yr - ₹10.6 L/yr

Diploma Trainee Engineer
518 salaries
unlock blur

₹1.1 L/yr - ₹2.9 L/yr

Design Engineer
331 salaries
unlock blur

₹2.1 L/yr - ₹9.3 L/yr

Service Engineer
277 salaries
unlock blur

₹1.2 L/yr - ₹9 L/yr

Explore more salaries
Compare Cummins with

John Deere

4.1
Compare

ABB

4.1
Compare

KONE

4.1
Compare

Caterpillar Inc

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview