Upload Button Icon Add office photos

Comau

Compare button icon Compare button icon Compare

Filter interviews by

Comau Interview Questions, Process, and Tips

Updated 8 May 2024

Top Comau Interview Questions and Answers

View all 7 questions

Comau Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before May 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Technical questions related to Fixture design parameters.

Senior Engineer Mechanical Interview Questions asked at other Companies

Q1. Few manufacturing process for sheet metal operations and when to use when in accordance to volume,lead time and cost balancing.
View answer (1)

Interview Questions & Answers

user image

posted on 23 Nov 2015

Interview Questionnaire 

5 Questions

  • Q1. About all thermal cycles in brief
  • Q2. Otto cycle in detail
  • Ans. 

    Otto cycle is a thermodynamic cycle used in spark-ignition engines.

    • It consists of four processes: intake, compression, power, and exhaust.

    • During the intake stroke, the fuel-air mixture is drawn into the cylinder.

    • In the compression stroke, the mixture is compressed to a high pressure and temperature.

    • The power stroke is where the spark plug ignites the mixture, causing it to rapidly expand and push the piston down.

    • Finall...

  • Answered by AI
  • Q3. FEA analysis
  • Q4. To compare otto and diesel cycle
  • Ans. 

    Otto cycle is used in gasoline engines while diesel cycle is used in diesel engines.

    • Otto cycle has constant volume heat addition while diesel cycle has constant pressure heat addition.

    • Otto cycle has higher thermal efficiency than diesel cycle.

    • Diesel cycle has higher compression ratio than Otto cycle.

    • Diesel cycle has lower exhaust gas temperature than Otto cycle.

    • Diesel cycle has higher NOx emissions than Otto cycle.

  • Answered by AI
  • Q5. Joule s law

Interview Preparation Tips

Round: Technical Interview
Tips: 1.Prepare one subject thoroughly and deeply.
2.They ask mainly the basics.
3.Study the latest trends in that field.


Skills:
College Name: NA

Interview Questions & Answers

user image

posted on 23 Nov 2015

I applied via Referral

Interview Questionnaire 

5 Questions

  • Q1. Working of syncromesh gearbox?
  • Ans. 

    A synchromesh gearbox is a type of manual transmission that uses synchronizers to match the speed of the gears before engaging them.

    • Synchromesh gearbox uses synchronizers to match the speed of the gears before engaging them

    • Synchronizers are small collars that help to match the speed of the gears

    • Synchromesh gearbox allows for smoother and faster gear changes

    • Synchromesh gearbox is commonly used in modern cars

    • Synchromesh ...

  • Answered by AI
  • Q2. Function of dogclutch?
  • Ans. 

    A dog clutch is a type of clutch that is used to engage and disengage gears in a manual transmission.

    • It is used to connect and disconnect the engine from the transmission

    • It is called a dog clutch because of the way the teeth on the clutch engage with the gears

    • It is commonly used in racing cars and motorcycles

    • It allows for quick and smooth gear changes

  • Answered by AI
  • Q3. Design of multi speed gearbox?
  • Ans. 

    A multi speed gearbox is designed to provide different gear ratios for efficient power transfer at different speeds.

    • The gearbox should have multiple gear ratios to match the engine's power output with the vehicle's speed.

    • The gear ratios should be evenly spaced to ensure smooth shifting.

    • The gearbox should be designed to handle the torque and power of the engine.

    • The gearbox should be lightweight and compact for efficient...

  • Answered by AI
  • Q4. Explain arc welding?
  • Ans. 

    Arc welding is a welding process that uses an electric arc to melt and join metals.

    • Electric current is used to create an arc between the base metal and the electrode

    • The heat generated by the arc melts the base metal and the electrode, which mix together to form a weld pool

    • As the weld pool cools, it solidifies and forms a strong joint between the two metals

    • Different types of arc welding include shielded metal arc weldin...

  • Answered by AI
  • Q5. Which gas is used in gas arc welding?
  • Ans. 

    Argon gas is commonly used in gas arc welding.

    • Argon gas is the most commonly used gas in gas arc welding.

    • It is used as a shielding gas to protect the weld from atmospheric contamination.

    • Argon gas provides a stable arc and helps to prevent oxidation during the welding process.

    • Other gases like helium and carbon dioxide can also be used depending on the specific welding requirements.

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Tips: 1. Say that you are very interested in designing.
2. Prepare well all the design subjects.
3. Be confident.


Skills:

Interview questions from similar companies

I appeared for an interview in Aug 2017.

Interview Questionnaire 

4 Questions

  • Q1. Difference between c and java?
  • Ans. 

    C is a procedural programming language while Java is an object-oriented programming language.

    • C is a low-level language while Java is a high-level language.

    • C requires manual memory management while Java has automatic memory management.

    • C is platform-dependent while Java is platform-independent.

    • C supports pointers while Java does not.

    • C has a simpler syntax compared to Java.

  • Answered by AI
  • Q2. Difference between final, finally and finalize
  • Ans. 

    final, finally, and finalize are keywords in Java with different meanings.

    • final is a keyword used to declare a constant value, a variable that cannot be modified.

    • finally is a block used in exception handling to ensure a piece of code is always executed, whether an exception is thrown or not.

    • finalize is a method in the Object class that is called by the garbage collector before an object is destroyed.

    • final and finally a...

  • Answered by AI
  • Q3. About yourself
  • Q4. Why Johnson
  • Ans. 

    Johnson is a reputable company known for its innovative software solutions and collaborative work environment.

    • Johnson has a strong reputation in the industry for delivering high-quality software solutions.

    • The company values collaboration and teamwork, which aligns with my own work style.

    • I admire Johnson's commitment to innovation and staying ahead of technological advancements.

  • Answered by AI

Interview Preparation Tips

Round: Apptitude Test
Experience: Questions was unpredictable as it was from reasoning,verbal , and from general knowledge also.Technical questions was also there.
Tips: Technical question was not that hard. Just have good basic knowledge of programming and DBMS

Round: Technical Interview
Experience: It was from basic concepts only.

Round: HR Interview
Experience: There were 12 HRs to take my interview but asked mainly from CV only.

Tips: Be calm and confident and learn the basic of subjects

College Name: BPPIMT

Skills evaluated in this interview

Consultant Interview Questions & Answers

Siemens user image Ujjwal Mukherjee

posted on 12 Dec 2015

I applied via Referral

Interview Questionnaire 

1 Question

  • Q1. What are the factors you would consider when building a plant? (Case Type- General business acumen)

Interview Preparation Tips

Round: Case Study Interview
Experience: Recommended Approach
Broke it into financial and non-financial and said ROI seems to be the best metric in financial. Went ahead after getting her buy-in and looked at various cost components in detail like labor, overheads etc. Throughout the interview, I was asked to go deeper and even when I was asked to move horizontally to other cost components, there was no closure of an issue. In the end, was just asked to summarize whatever we had done so far with 2 concluding statements

PI questions
Totally work and CV related cross questioning Why did you do this ELP and what did you learn Why SMC now This was a kind of stress interview where questions would start before I finished my answer. The same tone carried on in the case where scoping questions were frowned upon
Tips: What was good: Cool under pressure, confident What could be better: Take the hint if the interviewer is not giving data and lay out a structure and then ask questions explaining their relevance

Skills:
College Name: Indian School Of Business (ISB)

Consultant Interview Questions & Answers

Siemens user image Ujjwal Mukherjee

posted on 11 Dec 2015

I applied via Referral

Interview Questionnaire 

1 Question

  • Q1. You as a consultant have made a mistake and need to go back to your client’s CFO who is not co-operative and the final presentation is due tomorrow to the board
  • Ans. 

    Consultant must approach the CFO calmly, explain the mistake, offer solutions, and emphasize the importance of their cooperation for the success of the project.

    • Approach the CFO calmly and professionally

    • Explain the mistake honestly and take responsibility

    • Offer solutions to rectify the mistake and ensure it does not happen again

    • Emphasize the importance of the CFO's cooperation for the success of the project

    • Request for an...

  • Answered by AI

Interview Preparation Tips

Round: Case Study Interview
Experience: Recommended Approach
Depends on the interviewer and his discussion

PI questions
About yourself
Something that is not on your resume
Example of Learning from an achievement
Example of Learning from your work experience and what could you have don
Tips: What was good: PI, Patience to go on during the role play What could be better: I got caught up in the role play when he gave excuses not to cooperate

Skills:
College Name: Indian School Of Business (ISB)

Consultant Interview Questions & Answers

Siemens user image Ujjwal Mukherjee

posted on 12 Dec 2015

I applied via Referral

Interview Questionnaire 

1 Question

  • Q1. He gave me a slide which had 50 potential projects and asked me how I would choose.(Case Type-Cost-benefit)

Interview Preparation Tips

Round: Case Study Interview
Experience: Recommended Approach
Started with a Cost – Benefit – Risk and was asked to mainly consider capability building under major costs
Was given numbers for 2-3 projects and the case ended after straightforward calculations

PI questions
Talk about a personality trait that has evolved over time
An example of personal and professional success and cross questions on that In hindsight what could you have done better at work
Tips: What was good: PI, Calculations accuracy What could be better: I was given feedback to engage the interviewer more so that I could start with a more refined structure instead of a conventional structure

Skills:
College Name: Indian School Of Business (ISB)

Consultant Interview Questions & Answers

Siemens user image Ujjwal Mukherjee

posted on 11 Dec 2015

I applied via Referral

Interview Questionnaire 

1 Question

  • Q1. He gave me a slide which had 50 potential projects and asked me how I would choose.(Case Type :-Cost-benefit)

Interview Preparation Tips

Round: Case Study Interview
Experience: Started with a Cost – Benefit – Risk and was asked to mainly consider capability building under major costs Was given numbers for 2-3 projects and the case ended after straightforward calculations
Tips: What was good: PI, Calculations accuracy What could be better: I was given feedback to engage the interviewer more so that I could start with a more refined structure instead of a conventional structure

Skills:
College Name: Indian School Of Business (ISB)

Consultant Interview Questions & Answers

Siemens user image Ujjwal Mukherjee

posted on 12 Dec 2015

I applied via Referral

Interview Questionnaire 

1 Question

  • Q1. A windmill manufacturer in Scandinavia wants to expand but has no labor pool for recruitment and is constrained by it. (Case Type- Expansion / Growth)
  • Ans. 

    The windmill manufacturer in Scandinavia is facing labor pool shortage and needs to expand.

    • The manufacturer can consider outsourcing labor from other countries.

    • They can also invest in training programs to develop local talent.

    • The manufacturer can offer incentives to attract skilled workers to relocate.

    • They can also consider automating some of their processes to reduce the need for labor.

    • The manufacturer can partner wit...

  • Answered by AI

Interview Preparation Tips

Round: Case Study Interview
Experience: Broke it into attracting required labor at the site or outsourcing Within outsourcing talked about factors by which I would identify countries for this task.
In the end was just asked to recommend 2 industries from where I could use skills of existing engineers and I came up with other power generation industries and aerospace for blade design
Tips: What was good: PI, Involving the interviewer in case discussion What could be better: Quicker solution of case, he gave me a lot of hints and nudges for the solution After the final interview, I was also asked to rank each performance to check self-awareness. Overall, SMC checks a lot on cultural awareness, fit in their culture and personality traits.


Skills:
College Name: Indian School Of Business (ISB)

I applied via Approached by Company and was interviewed in Aug 2017. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Basic Java questions. Coding based on technical topics in Java. Approach and knowledge of other technology apart from core strength like ui ,design .
  • Q2. Scenario based questions. Deeper into Java and related technologies
  • Q3. Again based on Java and project but kind of client interview
  • Q4. Basic hr questions and salary discussion

Interview Preparation Tips

Round: Managerial
Experience: More of past projects and team handling

General Tips: Be prepared for basics in related technology and good through understanding in one core area.
Skills: Communication, Problem Solving, Analytical Skills, Decision Making Skills
Duration: 1-3 Months

Comau Interview FAQs

How many rounds are there in Comau interview?
Comau interview process usually has 1 rounds. The most common rounds in the Comau interview process are One-on-one Round.
How to prepare for Comau interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Comau. The most common topics and skills that interviewers at Comau expect are CATIA, Design Engineering, Eplan, Cost Estimation and Electric Vehicle.
What are the top questions asked in Comau interview?

Some of the top questions asked at the Comau interview -

  1. Which gas is used in gas arc weldi...read more
  2. working of syncromesh gearb...read more
  3. To compare otto and diesel cy...read more

Tell us how to improve this page.

Comau Interview Process

based on 7 interviews

Interview experience

4.7
  
Excellent
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 423 Interviews
Johnson Controls Interview Questions
3.6
 • 262 Interviews
GKN Interview Questions
3.8
 • 23 Interviews
TMEIC Interview Questions
3.8
 • 19 Interviews
Festo Interview Questions
3.9
 • 18 Interviews
View all

Comau Reviews and Ratings

based on 110 reviews

3.5/5

Rating in categories

3.2

Skill development

3.3

Work-life balance

3.3

Salary

3.6

Job security

3.1

Company culture

2.8

Promotions

3.2

Work satisfaction

Explore 110 Reviews and Ratings
Design Engineer
41 salaries
unlock blur

₹3.6 L/yr - ₹9.3 L/yr

Assistant Manager
22 salaries
unlock blur

₹11 L/yr - ₹18.5 L/yr

Junior Engineer
21 salaries
unlock blur

₹2.4 L/yr - ₹6.2 L/yr

Senior Design Engineer
20 salaries
unlock blur

₹7.8 L/yr - ₹14.5 L/yr

Robotics Engineer
15 salaries
unlock blur

₹4.1 L/yr - ₹9 L/yr

Explore more salaries
Compare Comau with

Siemens

4.1
Compare

Schneider Electric

4.1
Compare

Johnson Controls

3.6
Compare

Honeywell Automation

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview