Upload Button Icon Add office photos

Bosch Rexroth India

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Bosch Rexroth India ITI Electrician Interview Questions and Answers

Updated 6 May 2024

Bosch Rexroth India ITI Electrician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. The basic principle behind working of a transformer is the phenomenon of mutual induction between two windings linked by common magnetic flux. The figure at right shows the simplest form of a transformer. ...
  • Ans. 

    A transformer works on the principle of mutual induction between two windings linked by a common magnetic flux.

    • Transformers consist of two inductive coils - primary and secondary windings.

    • When an alternating current flows through the primary winding, it creates a changing magnetic field which induces a voltage in the secondary winding.

    • The ratio of the number of turns in the primary winding to the number of turns in the...

  • Answered by AI

Interview questions from similar companies

I applied via Job Fair and was interviewed before Apr 2017. There were 5 interview rounds.

Interview Preparation Tips

General Tips: First go to Mitsubishi office for near by m g road next all persona exam complete next all exam attendees vaiva interview optar asked to only calling persons selected other persons not select asking.
Skills: Knowledge About The Company, Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-4 weeks

I applied via Job Fair

Interview Questionnaire 

2 Questions

  • Q1. Whatis the dol strater
  • Ans. 

    DOL starter is a direct online starter used to start and stop the motor instantly.

    • DOL stands for Direct Online.

    • It is used to start and stop the motor instantly.

    • It is the simplest and cheapest method of starting a motor.

    • It consists of a contactor, overload relay, and start and stop push buttons.

    • It is used for small motors up to 5 horsepower.

    • It is not suitable for large motors as it causes a high starting current.

    • Example...

  • Answered by AI
  • Q2. Dol is direct online strater

Interview Preparation Tips

Interview preparation tips for other job seekers - Kindly ask candidates language also provide good facilities.

ITI Electrician Interview Questions & Answers

Johnson Controls user image POWERCON CONTROL SYSTEM.

posted on 28 Jul 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Types of mcb and functions
  • Ans. 

    MCB stands for Miniature Circuit Breaker. Types include single pole, double pole, triple pole, and four pole. Functions include overcurrent protection and short circuit protection.

    • Types of MCBs: single pole, double pole, triple pole, four pole

    • Functions: overcurrent protection, short circuit protection

    • Examples: Single pole MCB for individual circuits, four pole MCB for three-phase circuits

  • Answered by AI
  • Q2. Motor dol starter and Star delta starter

Interview Preparation Tips

Interview preparation tips for other job seekers - Good knowledge CEO
And new technology

Skills evaluated in this interview

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Oct 2023. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. Tell me about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Nc

I applied via Walk-in and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

40 min

Round 2 - One-on-one 

(1 Question)

  • Q1. Why you want to join Rockwell

Interview Preparation Tips

Interview preparation tips for other job seekers - Work well and get in good books of HR

I applied via Walk-in and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Everything Question I'm comfortable

Interview Preparation Tips

Interview preparation tips for other job seekers - I'm Good experience and I'm Diploma holder Electrical Engineering
Round 1 - Technical 

(3 Questions)

  • Q1. Which insulation is necessary for proper function and basic protection?
  • Ans. 

    Thermal insulation is necessary for proper function and basic protection.

    • Thermal insulation helps regulate temperature and prevent heat loss or gain.

    • Common types of insulation include fiberglass, foam, and cellulose.

    • Insulation is used in buildings, vehicles, and various industrial applications.

    • Examples of insulation materials include fiberglass batts, spray foam, and mineral wool.

    • Proper insulation improves energy effic

  • Answered by AI
  • Q2. What is the expansion ECC?
  • Ans. 

    ECC stands for Error Correction Code, which is a method used to detect and correct errors in data transmission.

    • ECC is commonly used in computer memory and storage devices to ensure data integrity.

    • It works by adding extra bits to the data being transmitted, which can be used to detect and correct errors.

    • There are different types of ECC, such as Single Error Correction Double Error Detection (SECDED) and Triple Error Cor

  • Answered by AI
  • Q3. Which type MCBs suitable for halogen lamps?
  • Ans. 

    Type B MCBs are suitable for halogen lamps.

    • Type B MCBs have a characteristic curve that allows for a short-term surge in current, which is common in halogen lamps.

    • Type C and D MCBs may trip too quickly and cause nuisance tripping.

    • It is important to check the wattage and voltage of the halogen lamp to ensure the correct MCB is selected.

    • Examples of Type B MCBs include Schneider Electric Acti 9 iK60N and ABB S 200 series.

  • Answered by AI
Round 2 - Aptitude Test 

What is the square root of 0.017?

Round 3 - Technical 

(1 Question)

  • Q1. What is the megger reading in a dead short wiring installation?
  • Ans. 

    A dead short wiring installation will have a megger reading of zero.

    • A dead short is a complete circuit with no resistance.

    • A megger is used to measure insulation resistance.

    • In a dead short, there is no insulation resistance to measure.

    • Therefore, the megger reading will be zero.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Awesome company if you want relaxed environment and great work life balance,

Skills evaluated in this interview

I applied via Apna Jobs

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the function of expenshon valve
  • Ans. 

    The expansion valve regulates the flow of refrigerant into the evaporator, controlling the cooling effect of the air conditioning system.

    • Regulates refrigerant flow into the evaporator

    • Controls cooling effect of AC system

    • Maintains proper pressure and temperature levels

    • Helps to improve energy efficiency

    • Examples: thermostatic expansion valve, electronic expansion valve

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - My bad luck I want to someone I near miss
Again I don't want to miss

.

I applied via Walk-in and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Electrical subject wiring motor panel
  • Q2. DG transfer me r fire HVAC
  • Q3. Utility brekers singale line diagram

Interview Preparation Tips

Interview preparation tips for other job seekers - Safety first and woner ship work companey work sir
Contribute & help others!
anonymous
You can choose to be anonymous

Bosch Rexroth India Interview FAQs

How many rounds are there in Bosch Rexroth India ITI Electrician interview?
Bosch Rexroth India interview process usually has 1 rounds. The most common rounds in the Bosch Rexroth India interview process are Technical.

Recently Viewed

SALARIES

Mallow Technologies

INTERVIEWS

Smart Planet IT Solutions

No Interviews

SALARIES

Flexsin Technologies

SALARIES

Flexsin Technologies

SALARIES

Mallow Technologies

JOBS

Merraky Engineering Solutions

No Jobs

SALARIES

L&T Technology Services

JOBS

Prudent Globaltech Solutions

No Jobs

JOBS

Perfect Publishing Solutions

No Jobs

JOBS

Arya Tankers

No Jobs

Tell us how to improve this page.

Bosch Rexroth India ITI Electrician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 420 Interviews
Johnson Controls Interview Questions
3.6
 • 262 Interviews
ABB Interview Questions
4.1
 • 236 Interviews
Hitachi Energy Interview Questions
4.1
 • 81 Interviews
TÜV SÜD Interview Questions
3.9
 • 63 Interviews
View all

Bosch Rexroth India ITI Electrician Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

4.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Design Engineer
47 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
44 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
41 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
38 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bosch Rexroth India with

Siemens

4.1
Compare

ABB

4.1
Compare

Schneider Electric

4.1
Compare

Honeywell Automation

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview