Upload Button Icon Add office photos

Bosch Chassis Systems

Compare button icon Compare button icon Compare

Filter interviews by

Bosch Chassis Systems Mechanical Maintenance Engineer Interview Questions and Answers

Updated 3 Jul 2024

Bosch Chassis Systems Mechanical Maintenance Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. Which bearing used in CNC spindle? And why ?
  • Ans. 

    Angular contact ball bearings are commonly used in CNC spindles due to their ability to handle both radial and axial loads.

    • Angular contact ball bearings are used in CNC spindles because they can handle both radial and axial loads efficiently.

    • These bearings provide high rigidity and accuracy, which are crucial for CNC machining operations.

    • The contact angle of angular contact ball bearings can be adjusted to optimize per...

  • Answered by AI
  • Q2. What is Backlash?and how to check it ?
  • Ans. 

    Backlash is the amount of clearance or play between two mating components in a mechanical system.

    • Backlash is commonly found in gear systems, where it can affect the accuracy and efficiency of the system.

    • To check backlash, one can use a dial indicator to measure the amount of movement between the components when they change direction.

    • Backlash can be adjusted by tightening or loosening the components to reduce the cleara...

  • Answered by AI
  • Q3. How many types of Hydraulic valve are there ? Diffenciate between pressure relief and pressure reducing valve.
  • Ans. 

    There are various types of hydraulic valves, including pressure relief and pressure reducing valves.

    • Types of hydraulic valves include directional control valves, flow control valves, pressure control valves, and check valves.

    • Pressure relief valves are designed to limit the pressure within a hydraulic system by diverting excess fluid when the pressure reaches a certain level.

    • Pressure reducing valves, on the other hand, ...

  • Answered by AI

Interview questions from similar companies

I applied via Walk-in and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Company work and management attitude.

Interview Preparation Tips

Interview preparation tips for other job seekers - Only reference is required for getting job here.no qualifications and experience matters. If you have any relative or reference from company u will get job easily. Compny is good but management is very poor. All seniors Only showoffs for their posts but they doesn't have any idea about their main work And area knowledge. just ready find a mistake of other colleague's. No work matters...
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. What is bearing and types
  • Ans. 

    A bearing is a mechanical component that supports the rotating shaft of a machine, reducing friction and enabling smooth movement.

    • Bearings are used in various applications such as automobiles, industrial machinery, and household appliances.

    • There are several types of bearings, including ball bearings, roller bearings, and plain bearings.

    • Ball bearings consist of balls enclosed between two rings and are commonly used in a...

  • Answered by AI
  • Q2. What is types of bearing
  • Ans. 

    Bearings are machine elements that reduce friction between moving parts. There are several types of bearings.

    • Plain bearings

    • Rolling element bearings

    • Jewel bearings

    • Fluid bearings

    • Magnetic bearings

  • Answered by AI
  • Q3. There are six types.

Interview Preparation Tips

Interview preparation tips for other job seekers - Monthly Salary 20000/-
Experience - 2 year fitter maintenance

I applied via Campus Placement and was interviewed before May 2018. There was 0 interview round.

Interview Preparation Tips

General Tips: If we want do job in company like of zf india as maintenance engineer we must have knowledge of electrical as well as mechanical and hydraulic because there are many special purpose machines and breakdown occurs at any above cause so for interviews purpose we should know basic of all.
Skills: Electrical Engineering Basics, Electrical Engineering Basics, Electrical knowledge, Communication, Problem Solving, Leadership
Duration: 1-4 weeks
College Name: Indo German Tool Room Aurangabad

I applied via Campus Placement and was interviewed in Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What kind of questions asked an scl management?

Interview Preparation Tips

Interview preparation tips for other job seekers - Written test is an the interview process and the question are previously explained and classes are teached.

I applied via Walk-in and was interviewed before Feb 2020. There was 1 interview round.

Interview Questionnaire 

6 Questions

  • Q1. Where do u live?
  • Q2. Now where are u saty
  • Q3. Asked the ohm's low
  • Q4. Explain 3ph induction motor working
  • Ans. 

    3ph induction motor works on the principle of electromagnetic induction to convert electrical energy into mechanical energy.

    • Three-phase AC power is supplied to the stator winding, creating a rotating magnetic field.

    • This rotating magnetic field induces a current in the rotor, which in turn creates its own magnetic field.

    • The interaction between the stator and rotor magnetic fields causes the rotor to rotate, converting e

  • Answered by AI
  • Q5. Drow star delta connection
  • Q6. 1 HP is equal how many watt
  • Ans. 

    1 HP is equal to 746 watts.

    • HP stands for horsepower, a unit of power used in the automotive and manufacturing industries.

    • Watt is the SI unit of power.

    • The conversion factor between HP and watt is 746.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give any ans in full of confidence.
Don't be silence say samthing of every question.

I applied via Recruitment Consultant

Interview Questionnaire 

1 Question

  • Q1. Mechanical engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Date

I applied via Recruitment Consultant and was interviewed in Jul 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Diff incremental and absolute encoder
  • Ans. 

    Incremental encoder measures relative position changes while absolute encoder measures absolute position.

    • Incremental encoder generates a series of pulses as the shaft rotates, which are used to determine the relative position change.

    • Absolute encoder generates a unique digital code for each shaft position, providing absolute position information.

    • Incremental encoder is simpler and less expensive, while absolute encoder i...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do the basis of the CNC machine.

I applied via Campus Placement and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Tell about yourself?
  • Q2. Which favorite subject you have?
  • Q3. Basic question regarding mechnical engineering such as Otto cycle vs desiel cycle, two stoke vs 4 stroke engine.
  • Q4. Questions related to Engineering drawing asked?
  • Q5. Most imporatant where you did yoir internship.

Interview Preparation Tips

Interview preparation tips for other job seekers - Make resume as simple as possible. About 70 % question asked from my internship and academic projects. If there is any communication gap in english ,don't be hesitate to switch to anothet language. Be confident whatever you said.

I applied via Walk-in and was interviewed before May 2021. There were 4 interview rounds.

Round 1 - Group Discussion 

Group discussed on Di

scipline spelling topic and explain

Round 2 - Technical 

(1 Question)

  • Q1. Self introduction explain
Round 3 - Technical 

(1 Question)

  • Q1. Explain and overall experience
Round 4 - HR 

(1 Question)

  • Q1. Discipline and working hour and salary discuss

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be hopless and talk to se forward

Bosch Chassis Systems Interview FAQs

How many rounds are there in Bosch Chassis Systems Mechanical Maintenance Engineer interview?
Bosch Chassis Systems interview process usually has 1 rounds. The most common rounds in the Bosch Chassis Systems interview process are Technical.
What are the top questions asked in Bosch Chassis Systems Mechanical Maintenance Engineer interview?

Some of the top questions asked at the Bosch Chassis Systems Mechanical Maintenance Engineer interview -

  1. How many types of Hydraulic valve are there ? Diffenciate between pressure reli...read more
  2. Which bearing used in CNC spindle? And wh...read more
  3. What is Backlash?and how to check i...read more

Tell us how to improve this page.

Bosch Chassis Systems Mechanical Maintenance Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 330 Interviews
Hitachi Astemo Interview Questions
4.1
 • 103 Interviews
Gabriel India Interview Questions
4.2
 • 95 Interviews
Valeo Interview Questions
4.0
 • 88 Interviews
CIE Automotive Interview Questions
3.7
 • 74 Interviews
DENSO Interview Questions
4.1
 • 73 Interviews
JTEKT Interview Questions
4.1
 • 65 Interviews
Hyundai Mobis Interview Questions
3.8
 • 63 Interviews
View all
Bosch Chassis Systems Mechanical Maintenance Engineer Salary
based on 6 salaries
₹2 L/yr - ₹2.9 L/yr
52% less than the average Mechanical Maintenance Engineer Salary in India
View more details

Bosch Chassis Systems Mechanical Maintenance Engineer Reviews and Ratings

based on 2 reviews

4.0/5

Rating in categories

3.0

Skill development

4.9

Work-life balance

4.0

Salary

2.0

Job security

4.9

Company culture

2.0

Promotions

3.0

Work satisfaction

Explore 2 Reviews and Ratings
Quality Engineer
185 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Trainee
153 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer Trainee
120 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
95 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Inspector
93 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bosch Chassis Systems with

ZF Steering Gear

3.7
Compare

Mando Automotive

3.9
Compare

ZF Commercial Vehicle Control Systems

3.9
Compare

Continental Automotive Components

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview