Upload Button Icon Add office photos

Filter interviews by

Bharat Benz Service Engineer Interview Questions and Answers

Updated 24 Mar 2022

Bharat Benz Service Engineer Interview Experiences

1 interview found

Service Engineer Interview Questions & Answers

user image Akash Kumar Dash

posted on 24 Mar 2022

I applied via Referral and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. How differential principle working in the train.
  • Ans. 

    Differential principle allows wheels to rotate at different speeds in a train.

    • Differential gear allows wheels on the same axle to rotate at different speeds

    • This is important in a train as the outer wheels need to travel a greater distance than the inner wheels when turning

    • Without differential principle, the wheels would skid or slip when turning

    • Differential principle is also used in cars and other vehicles

  • Answered by AI
  • Q2. Electric lines in Vehicle(Starting of vehicle)
  • Ans. 

    Electric lines in a vehicle are responsible for starting the vehicle.

    • Electric lines in a vehicle provide the necessary power to start the engine.

    • These lines connect the battery to the starter motor, which initiates the engine's combustion process.

    • The lines also connect various electrical components, such as ignition systems and fuel injection systems.

    • Proper insulation and wiring are crucial to ensure efficient and safe

  • Answered by AI
  • Q3. How power transmission occurs?
  • Ans. 

    Power transmission occurs through various means such as electrical, mechanical, hydraulic, and pneumatic systems.

    • Electrical power transmission occurs through power lines and transformers.

    • Mechanical power transmission occurs through gears, belts, and chains.

    • Hydraulic power transmission occurs through fluids and pumps.

    • Pneumatic power transmission occurs through compressed air and valves.

    • Power can also be transmitted wire...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Communication,Technical knowledge, convincing skills, system & process analysis.

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

Interview Questionnaire 

2 Questions

  • Q1. Technical questions related to job
  • Q2. Basic HR questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Looking job for home location

I applied via Referral and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Difficulty is moderate. Asked question as per resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Go through your resume and prepare as per that
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. About your work
Round 2 - Technical 

(1 Question)

  • Q1. Previous experience
Interview experience
4
Good
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I was interviewed before Jan 2024.

Round 1 - HR 

(2 Questions)

  • Q1. How many last ctc
  • Ans. 

    The question is asking about the candidate's last drawn salary (CTC).

    • CTC stands for Cost to Company and refers to the total salary package of an employee including all benefits and perks.

    • The candidate should provide the exact amount or range of their last drawn CTC.

    • It is important to be honest and transparent about the last CTC to negotiate effectively for the new role.

  • Answered by AI
  • Q2. Your CTC pakage

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare before technical interview
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2022. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What is your Experience
  • Q2. What is your expected CTC
  • Ans. 

    My expected CTC is in line with industry standards for a Sr. Engineer role.

    • Research industry standards for Sr. Engineer roles in the current market

    • Consider my years of experience, skills, and qualifications when determining my expected CTC

    • Be open to negotiation based on the overall compensation package offered

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Make Star-Delta electrical wiring diagram.
  • Ans. 

    Star-Delta wiring diagram involves connecting a motor in two different configurations for starting and running.

    • Star connection involves connecting all three terminals of the motor windings together to form a star shape.

    • Delta connection involves connecting the terminals in a triangular shape.

    • Switching between star and delta configurations is done using a special motor starter.

    • Star-Delta wiring is commonly used for reduc...

  • Answered by AI
  • Q2. Make star-delta ladder logic.
  • Ans. 

    Star-delta ladder logic is used to control the starting method of a three-phase induction motor.

    • Use two sets of contactors to switch between star and delta connections.

    • Implement a timer to delay the transition from star to delta.

    • Include overload protection for the motor.

    • Ensure proper interlocking to prevent simultaneous connection of star and delta.

    • Test the ladder logic thoroughly before implementation.

  • Answered by AI
Round 3 - Disscussion Round withPlant Head 

(1 Question)

  • Q1. Energy Saving questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident about your technical skills.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basic automobile stuffs, about vehicle working
  • Q2. Warranty processes in dealership
  • Ans. 

    Warranty processes in dealership involve handling warranty claims, coordinating with manufacturers, and ensuring customer satisfaction.

    • Understanding the warranty terms and conditions set by manufacturers

    • Processing warranty claims accurately and efficiently

    • Coordinating with manufacturers for approvals and reimbursements

    • Ensuring timely repairs or replacements under warranty

    • Maintaining records of warranty claims and repai

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. About myself,strength & weakness

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. About profile experience tecnical
  • Q2. About your background

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

Bharat Benz Interview FAQs

How many rounds are there in Bharat Benz Service Engineer interview?
Bharat Benz interview process usually has 2 rounds. The most common rounds in the Bharat Benz interview process are Resume Shortlist and Technical.
What are the top questions asked in Bharat Benz Service Engineer interview?

Some of the top questions asked at the Bharat Benz Service Engineer interview -

  1. How differential principle working in the tra...read more
  2. Electric lines in Vehicle(Starting of vehic...read more
  3. How power transmission occu...read more

Tell us how to improve this page.

Bharat Benz Service Engineer Salary
based on 4 salaries
₹1.6 L/yr - ₹2.9 L/yr
31% less than the average Service Engineer Salary in India
View more details

Bharat Benz Service Engineer Reviews and Ratings

based on 2 reviews

4.9/5

Rating in categories

3.0

Skill development

3.0

Work-life balance

4.0

Salary

5.0

Job security

4.0

Company culture

3.0

Promotions

2.0

Work satisfaction

Explore 2 Reviews and Ratings
Service Advisor
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technician
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Business Development Manager
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Business Development Executive
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Customer Relationship Manager
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bharat Benz with

Tata Motors

4.2
Compare

Ashok Leyland

4.1
Compare

Mahindra & Mahindra

4.1
Compare

Eicher Motors

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview