Upload Button Icon Add office photos

Filter interviews by

Ashwin Precision Products QA QC Engineer Interview Questions and Answers

Updated 26 Aug 2022

Ashwin Precision Products QA QC Engineer Interview Experiences

1 interview found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Core strength, qa related

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident, through what in your cv, ppap, apqp, msa, core tools

Interview questions from similar companies

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

Interview Questionnaire 

5 Questions

  • Q1. Pertaining to the mentioned roles and responsibilities in your resume
  • Q2. Planning and work order creation
  • Q3. Piling activities
  • Q4. Introduction
  • Q5. Cross checking of documents

Interview Preparation Tips

Round: Resume Shortlist
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.

Interview Questionnaire 

3 Questions

  • Q1. What is android architecture stack?
  • Ans. 

    Android architecture stack is a set of layers that make up the Android operating system.

    • The stack includes four main layers: Linux kernel, native libraries, Android runtime, and application framework.

    • The Linux kernel provides low-level system functionality.

    • Native libraries are written in C or C++ and provide access to hardware-specific features.

    • The Android runtime includes the Dalvik virtual machine and core libraries.

    • ...

  • Answered by AI
  • Q2. What is AIDL?
  • Ans. 

    AIDL stands for Android Interface Definition Language, used for inter-process communication in Android.

    • AIDL is used to define the interface between client and service in Android.

    • It allows communication between different processes in Android.

    • AIDL is used to pass complex data types between processes.

    • AIDL is similar to Remote Procedure Call (RPC) in other programming languages.

    • Example: AIDL is used in Android to implement...

  • Answered by AI
  • Q3. What is hash set and hash map
  • Ans. 

    Hash set and hash map are data structures used to store key-value pairs for efficient retrieval.

    • Hash set stores unique values without any specific order.

    • Hash map stores key-value pairs and allows fast retrieval of values based on keys.

    • Both use hashing to map keys to their corresponding values.

    • In Java, HashSet and HashMap are implementations of these data structures.

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Casting should be thorough

Round 2 - Case Study 

Aluminium die Casting

Interview Preparation Tips

Interview preparation tips for other job seekers - Casting prep well

I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Write and explain GD&T symbols?
  • Ans. 

    GD&T symbols are used to specify the geometric requirements of a part or assembly.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • Symbols include: flatness, circularity, perpendicularity, concentricity, position, and more

    • Each symbol has a specific meaning and is used to communicate precise engineering requirements

    • GD&T is used in industries such as aerospace, automotive, and manufacturing

    • Example: A position symbol...

  • Answered by AI
  • Q2. Explain Cp, Cpk & Pp, Ppk?
  • Ans. 

    Cp, Cpk, Pp, and Ppk are statistical process control indices used to measure process capability and performance.

    • Cp and Cpk measure how well a process meets its specifications, with Cpk being more accurate for non-centered processes.

    • Pp and Ppk measure how well a process performs relative to its natural variation, with Ppk being more accurate for non-centered processes.

    • All four indices are calculated using the process me...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Related to GD&T, CNC programming knowledge, SPC, Fixture design and development, Tool design and development.

Interview Preparation Tips

Interview preparation tips for other job seekers - Willing to work extra hours and ready to compromise family members.

I applied via Naukri.com and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Mix design of concrete?
  • Ans. 

    Mix design of concrete involves determining the proportions of various ingredients to achieve desired properties.

    • The mix design process involves determining the water-cement ratio, aggregate-cement ratio, and admixture dosage.

    • Factors such as strength, workability, and durability are considered when designing the mix.

    • Examples of admixtures include water reducers, air-entraining agents, and superplasticizers.

  • Answered by AI
  • Q2. Durability parameters of concrete?
  • Ans. 

    Durability parameters of concrete include compressive strength, permeability, and resistance to freeze-thaw cycles.

    • Compressive strength is the most commonly used parameter to measure concrete durability.

    • Permeability is the ability of concrete to resist water penetration.

    • Resistance to freeze-thaw cycles is important in areas with cold climates.

    • Other parameters include abrasion resistance, chemical resistance, and shrink...

  • Answered by AI
  • Q3. ISO 9001 old vs new version?
  • Ans. 

    ISO 9001:2015 emphasizes risk-based thinking and a process approach to quality management.

    • ISO 9001:2015 has a stronger focus on leadership and top management involvement

    • The new version emphasizes risk-based thinking and a process approach to quality management

    • ISO 9001:2015 has a greater emphasis on measuring and evaluating the effectiveness of quality management systems

    • The new version also includes a greater emphasis o...

  • Answered by AI
  • Q4. Rebar test parameter?
  • Ans. 

    Rebar test parameters include diameter, length, weight, and tensile strength.

    • Diameter: measured using a caliper or micrometer

    • Length: measured using a tape measure or ruler

    • Weight: measured using a scale

    • Tensile strength: measured using a tensile testing machine

    • Other parameters may include bend and rebend tests, weldability, and corrosion resistance

  • Answered by AI
  • Q5. Documentation at project lab?
  • Ans. 

    Documentation is crucial in project lab for traceability and quality assurance.

    • All activities and results should be documented

    • Documentation should be clear, concise and accurate

    • Documentation should be easily accessible and organized

    • Documentation should include test plans, test cases, test results, and any deviations from the plan

    • Documentation should be reviewed and approved by relevant stakeholders

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited QA QC Engineer interview:
  • Concrete
  • Soil
Interview preparation tips for other job seekers - Answer with confidence. Be confident and be in formal attire. All the best.

Skills evaluated in this interview

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Major questions on my past work responsibilities and projects, stlc, defect life cycle, tools used, test case writing, techniques, test plan, agile methodologies

Interview Preparation Tips

Interview preparation tips for other job seekers - Web interview on Aug 2021
Got interview through recruitment consultancy from naukri

I applied via Campus Placement and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

General intelligence

Round 2 - Technical 

(1 Question)

  • Q1. Fav subject and project related

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest while answering and dont panic

Ashwin Precision Products Interview FAQs

How many rounds are there in Ashwin Precision Products QA QC Engineer interview?
Ashwin Precision Products interview process usually has 2 rounds. The most common rounds in the Ashwin Precision Products interview process are Resume Shortlist and Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 330 Interviews
Thermax Limited Interview Questions
4.1
 • 251 Interviews
Cummins Interview Questions
4.3
 • 231 Interviews
John Deere Interview Questions
4.1
 • 229 Interviews
Caterpillar Inc Interview Questions
4.3
 • 176 Interviews
KONE Interview Questions
4.1
 • 101 Interviews
View all
Quality Engineer
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Inspector
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Maintenance Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

CNC Operator
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Manager
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Ashwin Precision Products with

Bharat Forge

3.9
Compare

Bosch

4.2
Compare

Wipro Infrastructure Engineering

3.7
Compare

Godrej Aerospace

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview