Almabani General Contractors Electrician Interview Questions and Answers

Q1. You Job location
Add your answer

Q1. Tell me about yourself I am Ashutosh Singh
Add your answer

I am Ashutosh Singh
Experience 9 years

ITI electrical 1 year experience in Hero Moto corp limited

Q1. I waiting from a job
Add your answer
Q2. I having in work in talent
Add your answer
Q3. I have a 1 year experience in Hero Moto corp limited in chittoor
Add your answer
Q4. My family is poor people
Add your answer

Q1. How many current in 3 phase
Ans. 
The current in a 3 phase system depends on the voltage and power of the system.
• The current in a 3 phase system can be calculated using the formula: I = P / (sqrt(3) * V)

• Where I is the current, P is the power, and V is the voltage

• For example, if the power is 1000W and the voltage is 240V, the current would be approximately 4.33A
Answered by AI
View 1 more amswer
Q2. Full form the MCB
Ans. 
MCB stands for Miniature Circuit Breaker, a device designed to protect electrical circuits from overloads and short circuits.
• MCB is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions like overload or short circuit.

• It is commonly used in residential and commercial electrical installations to protect wiring and electrical equipment.

• MCBs are available in different curr...read more
Answered by AI
View 1 more amswer
Q3. How check AC DC current
Ans. 
To check AC DC current, use a multimeter set to the appropriate setting and connect the probes to the circuit being tested.
• Set the multimeter to the AC or DC current setting depending on what you are testing.

• Ensure the multimeter probes are connected correctly to the circuit being tested.

• Read the current measurement displayed on the multimeter.

• For AC current, make sure the multimeter is set to the appropriate range (e....read more
Answered by AI
View 1 more amswer
Q4. How Check of cable continuity
Ans. 
To check cable continuity, use a multimeter to measure resistance between two points on the cable.
• Use a multimeter set to the resistance or continuity mode.

• Connect one probe to one end of the cable and the other probe to the other end.

• A low resistance reading indicates good continuity, while a high resistance or infinite reading indicates a break in the cable.

• Check for continuity in each conductor of the cable separate...read more
Answered by AI
View 1 more amswer
Q5. What is PVC full form
Ans. 
PVC stands for Polyvinyl Chloride, a type of plastic commonly used in construction and electrical applications.
• PVC is a versatile material known for its durability and resistance to chemicals.

• It is commonly used in electrical wiring, plumbing pipes, and vinyl flooring.

• PVC is lightweight, easy to install, and cost-effective compared to other materials.

• Examples of PVC products include PVC pipes, PVC electrical conduits,
Answered by AI
View 1 more amswer
Q6. Name of the motor work in AC and DC
Ans. 
The motor work in AC is based on electromagnetic induction, while in DC it is based on the Lorentz force principle.
• AC motors work on the principle of electromagnetic induction, where a changing magnetic field induces a current in the rotor coils.

• DC motors operate based on the Lorentz force principle, where a current-carrying conductor in a magnetic field experiences a force.

• Examples of AC motors include induction motor...read more
Answered by AI
Add your answer

Q1. What skills and knowledge do you possess that you feel make you a good technician.
Add your answer
Q2. Understanding of technician skills and requirements Technical and soft skills applicable to the position Experience as a technician
Add your answer
Q3. Why is it important to stay updated on the most recent technology trends and developments?
Add your answer
Q4. Interest in technology and being a technician Opinion on new technology trends Ability to learn and stay motivated
Add your answer

Difficult but get prepared to face it

Q1. How do you diagnose short circuit
Ans. 
A short circuit can be diagnosed by checking for signs of damage, using a multimeter, and tracing the circuit.
• Check for signs of damage such as melted wires or blown fuses

• Use a multimeter to test for continuity and resistance

• Trace the circuit to locate the point of the short circuit

• Isolate the affected area and repair or replace damaged components
Answered by AI
Add your answer

Fundamental and controlling system

Q1. Electrical protection, fault finding, protective device and short circuit
Add your answer
Q2. Which device is very sensational in low voltage protective system?
Ans. 
The device that is very sensational in low voltage protective system is a Ground Fault Circuit Interrupter (GFCI).
• Ground Fault Circuit Interrupter (GFCI) is a device that quickly breaks an electrical circuit to prevent serious harm from an ongoing electric shock.

• GFCIs are commonly used in areas where water and electricity may come into contact, such as bathrooms, kitchens, and outdoor outlets.

• They work by constantly mo...read more
Answered by AI
Add your answer
Q3. When the line tester shows in both phase and neutral in the line should you check?
Ans. 
Yes, you should check for a possible short circuit or reversed polarity.
• Check for a possible short circuit in the wiring

• Check for reversed polarity in the electrical connections

• Ensure proper grounding of the system

• Verify the connections at the distribution board

• Consult with a senior electrician if unsure
Answered by AI
Add your answer
Q4. Says the 10 safe method when you work on electrical pannel?
Ans. 
The 10 safe methods when working on an electrical panel include proper training, de-energizing the panel, using appropriate PPE, and following lockout/tagout procedures.
• Ensure you are properly trained and qualified to work on electrical panels.

• Always de-energize the panel before starting any work.

• Use appropriate personal protective equipment (PPE) such as insulated gloves and safety glasses.

• Follow lockout/tagout proced...read more
Answered by AI
Add your answer
Q5. How many mm cable is suitable for the 15 Hp induction motor
Ans. 
The suitable cable size for a 15 Hp induction motor would typically be around 10 mm.
• The cable size for a motor depends on factors like the motor's power rating, voltage, and distance from the power source.

• For a 15 Hp motor, a cable size of around 10 mm would be suitable to handle the power requirements.

• It is important to consult with a qualified electrician or refer to the motor manufacturer's guidelines for the exact
Answered by AI
Add your answer

Q1. What is motor ?
Ans. 
A motor is a device that converts electrical energy into mechanical energy to produce motion.
• Motors are commonly used in various applications such as industrial machinery, household appliances, and vehicles.

• There are different types of motors including AC motors, DC motors, and servo motors.

• Motors consist of a rotor, stator, and various components such as coils, magnets, and brushes.

• Examples of motors include electric
Answered by AI
View 1 more amswer
Q2. What is acb ?
Ans. 
ACB stands for Air Circuit Breaker, a type of circuit breaker that operates in the air instead of oil or gas.
• ACB is used to protect electrical circuits from overloads and short circuits.

• It automatically cuts off the power supply when a fault is detected.

• ACBs are commonly used in industrial and commercial buildings.

• Examples of ACB manufacturers include Siemens, Schneider Electric, and ABB.
Answered by AI
Add your answer